🎓 RAS • RPSC • NEET • SSC • RRB • Teaching परीक्षाओं की तैयारी
मुफ़्त Notes, Daily Current Affairs और Online Mock Tests — सब कुछ एक ही जगह
🩺 NEET (UG) Hub — Notes, Quiz और Mock Tests
Class 11-12 Chapter-wise Notes (Hindi + English), 30-Question Quiz और PYQ Mock Tests — बिल्कुल मुफ़्त
🌿 Biology 🧪 Chemistry ⚛ Physics 📝 NEET Mock Tests — Free

NEET Chemistry Notes: Aldehydes, Ketones and Carboxylic Acids — Complete Notes


 

Aldehydes, Ketones and Carboxylic Acids — Complete Notes

Subject: Chemistry • Class: 12 • Unit: Organic Chemistry

Place in the exam pattern: Questions come from this chapter every year — the distinguishing tests (Tollens, Fehling, iodoform), named preparations (Rosenmund, Etard, Gatterman–Koch), aldol and Cannizzaro reactions, and the acidity order of carboxylic acids are the most frequently asked parts.

Aldehydes, ketones and carboxylic acids are the carbonyl compounds of organic chemistry. In aldehydes the carbonyl carbon is bonded to at least one hydrogen (general formula R–CHO); in ketones it is bonded to two carbon groups (R–CO–R). Carboxylic acids carry the carboxyl group (–COOH), which combines a carbonyl and a hydroxyl part. Almost every reaction of this chapter flows from one fact — the carbonyl carbon is electron-poor and is attacked by nucleophiles.

1. Nomenclature and the Carbonyl Group

  • Common names: formaldehyde (HCHO), acetaldehyde (CH3CHO), acetone (CH3COCH3), benzaldehyde (C6H5CHO), acetic acid (CH3COOH), formic acid (HCOOH), benzoic acid (C6H5COOH).
  • IUPAC names: aldehydes take the suffix -al (methanal, ethanal, propanal, benzaldehyde is retained as benzenecarbaldehyde); ketones take -one with the locant of the carbonyl carbon (propanone, butan-2-one, pentan-3-one); carboxylic acids take -oic acid (methanoic acid, ethanoic acid, benzoic acid).
  • The carbonyl carbon is counted as C-1 in aldehydes and acids (no locant is needed for -al and -oic acid).
  • Structure of the carbonyl group: the carbonyl carbon is sp2 hybridised and trigonal planar (bond angles about 120°). The C=O bond is polar — oxygen is more electronegative, so carbon carries a partial positive charge (delta+) and oxygen a partial negative charge (delta-). This polarity makes the carbonyl carbon electrophilic (attacked by nucleophiles) and explains the dipole–dipole attraction between these molecules.
ClassFunctional groupGeneral formulaFirst members
Aldehyde–CHOR–CHOMethanal (HCHO), Ethanal (CH3CHO)
Ketone>C=OR–CO–R'Propanone (CH3COCH3), Butan-2-one
Carboxylic acid–COOHR–COOHMethanoic acid (HCOOH), Ethanoic acid (CH3COOH)

2. Preparation of Aldehydes and Ketones

MethodStarting materialProductKey point
Oxidation of primary alcoholsRCH2OH + PCC (or CrO3)Aldehyde RCHOMild oxidant stops at aldehyde; strong oxidants (KMnO4, K2Cr2O7/H2SO4) go on to the acid
Oxidation of secondary alcoholsR2CHOH + CrO3 / KMnO4KetoneSecondary alcohol gives a ketone
Ozonolysis of alkenesAlkene + O3, then Zn/H2OTwo carbonyl compoundsReductive work-up (Zn/H2O) prevents further oxidation of aldehydes to acids
Hydration of alkynesEthyne + H2O, H2SO4/HgSO4AcetaldehydeOnly ethyne gives an aldehyde; all other alkynes give ketones (Markovnikov addition of water)
Hydroboration–oxidation of alkynesTerminal alkyne + (i) B2H6 (ii) H2O2/NaOHAldehydeAnti-Markovnikov hydration — terminal alkyne gives an aldehyde
Rosenmund reductionAcid chloride RCOCl + H2, Pd/BaSO4Aldehyde RCHOPoisoned catalyst (BaSO4, often with S/quinoline) stops reduction at the aldehyde stage
Stephen reactionNitrile RCN + SnCl2/HCl, then H3O+Aldehyde RCHONitrile is reduced to an imine salt, which hydrolyses to the aldehyde
DIBAL-H reductionNitrile or ester + DIBAL-H, low temperature, then H2OAldehydeStops at aldehyde at low temperature
Etard reactionToluene + CrO2Cl2 (chromyl chloride), then hydrolysisBenzaldehydeSide-chain oxidation of toluene stopped at the aldehyde
Oxidation of toluene (strong)Toluene + KMnO4/K2Cr2O7, heatBenzoic acidThe whole side chain, however long, is oxidised to –COOH
Gatterman–Koch reactionBenzene + CO + HCl, anhydrous AlCl3/CuClBenzaldehydeFormylation of benzene; does NOT work for phenol and aniline
From Grignard reagentRMgX + HCN / nitrile, then hydrolysisAldehyde / ketoneHCN gives an aldehyde (one carbon more); a nitrile gives a ketone
Friedel–Crafts acylationBenzene + RCOCl or (RCO)2O, anhydrous AlCl3Aromatic ketoneAcetyl chloride gives acetophenone
From calcium salts / ketonic hydrolysisCalcium salt of acid, dry distillationKetoneCalcium acetate gives acetone

Worked ozonolysis example: 3-methylbut-1-ene on ozonolysis (O3, then Zn/H2O) gives formaldehyde + 2-methylpropanal — the two carbonyl products reveal where the double bond was.

3. Physical Properties of Aldehydes and Ketones

  • State and smell: methanal is a gas (pungent), ethanal is a volatile liquid; higher aldehydes are liquids/solids, several with fruity smells. Lower ketones are colourless liquids with a pleasant smell.
  • Boiling points: aldehydes and ketones boil higher than hydrocarbons and ethers of comparable mass (dipole–dipole attraction) but lower than alcohols and carboxylic acids (no intermolecular hydrogen bonding of their own — they have no O–H bond).
  • Solubility: the lower members (up to about C4) are miscible/soluble in water because they hydrogen-bond with water through the carbonyl oxygen; solubility falls rapidly as the hydrocarbon part grows. All are soluble in organic solvents.
  • Benzaldehyde is a colourless oily liquid (bitter-almond smell), almost insoluble in water.

4. Chemical Reactions of Aldehydes and Ketones

4.1 Nucleophilic Addition Reactions

The nucleophile (Nu-) attacks the electrophilic carbonyl carbon; the order of reactivity is aldehydes more reactive than ketones (less steric hindrance, and two alkyl groups in a ketone push electrons and reduce the positive charge on carbon). Aromatic aldehydes/ketones are less reactive than aliphatic ones.

ReagentProductPoint to remember
HCNCyanohydrin, e.g. CH3CHO + HCN -> CH3CH(OH)CNPure HCN reacts slowly; a little base (OH-) speeds it up by generating CN-
NaHSO3 (sodium hydrogensulphite)Crystalline bisulphite addition productGiven by aldehydes and methyl ketones; used to separate and purify carbonyl compounds (product decomposes back with dilute acid/alkali)
Grignard reagent RMgX, then H3O+AlcoholFormaldehyde gives a primary alcohol; other aldehydes give secondary alcohols; ketones give tertiary alcohols. Example: acetone + CH3MgCl, then hydrolysis -> tert-butyl alcohol (2-methylpropan-2-ol)
Alcohols (dry HCl)Acetal (from aldehyde) / ketal (from ketone)Aldehyde + 2 ROH -> acetal + H2O; cyclic acetals form with ethylene glycol
Ammonia derivatives NH2–ZImine-type products (condensation, loss of H2O)NH2OH -> oxime; NH2NH2 -> hydrazone; phenylhydrazine -> phenylhydrazone; 2,4-dinitrophenylhydrazine (2,4-DNP) -> orange/red precipitate (test for the carbonyl group); semicarbazide -> semicarbazone; a primary amine RNH2 -> Schiff's base (imine)

4.2 Oxidation — the Distinguishing Tests



  • Strong oxidants (KMnO4, K2Cr2O7/H2SO4, HNO3) convert aldehydes to carboxylic acids with the same number of carbons; ketones resist and are cleaved only under vigorous conditions, giving acids with fewer carbons.
  • Tollens' reagent (ammoniacal silver nitrate): aldehydes reduce it to a silver mirror (metallic Ag). Ketones do NOT react. This test distinguishes aldehyde from ketone.
  • Fehling's solution (A = aqueous copper sulphate; B = alkaline sodium potassium tartrate, Rochelle salt): aliphatic aldehydes give a red precipitate of Cu2O on heating. Benzaldehyde (aromatic aldehyde) does NOT reduce Fehling's solution, and ketones do not react.
  • Schiff's reagent regains its pink colour with aldehydes (not ketones).
TestAldehydeKetoneSpecial case
Tollens' reagentSilver mirror — POSITIVENo reactionFormic acid and alpha-hydroxy ketones also positive
Fehling's solutionRed Cu2O ppt (aliphatic only)No reactionBenzaldehyde NEGATIVE with Fehling
Schiff's reagentPink colour restoredNo reaction—
2,4-DNPOrange precipitateOrange precipitateTests the carbonyl group in BOTH
Iodoform (I2/NaOH)Acetaldehyde POSITIVE (only aldehyde)Methyl ketones POSITIVEEthanol and secondary alcohols with CH3CH(OH)– also positive

4.3 Reduction

ReagentProduct from aldehyde/ketoneNote
H2/Ni, or LiAlH4, or NaBH4Alcohol (aldehyde -> primary, ketone -> secondary)Catalytic / hydride reduction of C=O to CH–OH
Clemmensen reduction: Zn–Hg, conc. HClAlkane (C=O -> CH2)Used when the molecule is acid-stable; e.g. acetaldehyde -> ethane
Wolff–Kishner reduction: NH2NH2, then KOH/ethylene glycol, heatAlkane (C=O -> CH2)Used when the molecule is base-stable (acid-sensitive compounds)

4.4 Reactions due to alpha-Hydrogen

  • The alpha-hydrogens of aldehydes and ketones are acidic (the carbanion/enolate formed is resonance-stabilised).
  • Aldol condensation: aldehydes and ketones having at least one alpha-hydrogen react in dilute alkali (NaOH or Ba(OH)2) to give a beta-hydroxy aldehyde (aldol) or beta-hydroxy ketone, which on heating loses water to give an alpha,beta-unsaturated carbonyl compound. 2 CH3CHO --dil. NaOH--> CH3CH(OH)CH2CHO (3-hydroxybutanal) --heat--> CH3CH=CHCHO (but-2-enal) + H2O Acetone with dilute Ba(OH)2 gives diacetone alcohol, which has alcohol and ketone functional groups.
  • Cross aldol condensation: between two different aldehydes/ketones. Benzaldehyde + acetophenone in dilute NaOH is a cross aldol condensation.
  • No alpha-hydrogen, no aldol: formaldehyde, benzaldehyde, trimethylacetaldehyde cannot undergo aldol condensation.

4.5 Cannizzaro Reaction

Aldehydes with no alpha-hydrogen undergo self oxidation–reduction (disproportionation) with concentrated KOH: one molecule is oxidised to the carboxylate and the other reduced to the alcohol.

  • 2 HCHO --conc. KOH--> CH3OH + HCOOK (methanol + potassium formate)
  • 2 C6H5CHO --conc. KOH--> C6H5CH2OH + C6H5COOK (benzyl alcohol + potassium benzoate)
  • Cross Cannizzaro between formaldehyde and another aldehyde: formaldehyde is always the one oxidised.

4.6 Haloform (Iodoform) Reaction

Compounds containing the CH3CO– group (all methyl ketones, and acetaldehyde — the only aldehyde) react with I2/NaOH (or NaOI) to give a yellow precipitate of iodoform (CHI3) and the sodium salt of an acid with one carbon less.

  • CH3COCH3 + 3 I2 + 4 NaOH -> CHI3 (yellow ppt) + CH3COONa + 3 NaI + 3 H2O

4.7 Electrophilic Substitution in Benzaldehyde

The –CHO group is electron-withdrawing, deactivating and meta-directing. Benzaldehyde undergoes nitration, sulphonation and halogenation more slowly than benzene, and the incoming group enters the meta position (e.g. nitration gives m-nitrobenzaldehyde).

5. Uses of Aldehydes and Ketones

  • Formaldehyde: its 40% aqueous solution (formalin) preserves biological specimens and is used in making bakelite and other resins.
  • Acetaldehyde: starting material for acetic acid, dyes, drugs and resins.
  • Acetone: common laboratory and industrial solvent (paints, varnishes, nail-polish remover).
  • Benzaldehyde: perfumery and flavouring (almond essence), and in dye manufacture.

6. Carboxylic Acids — Preparation

MethodReaction in words
Oxidation of primary alcohols / aldehydesStrong oxidants — acidified K2Cr2O7, KMnO4 in acidic or alkaline medium, CrO3–H2SO4 (Jones reagent) — convert a primary alcohol fully to the carboxylic acid. Cu at 573 K only dehydrogenates (gives aldehyde), so it does NOT give the acid
Oxidation of alkylbenzenesToluene and other alkylbenzenes + strong KMnO4, heat -> benzoic acid (side chain fully oxidised, whatever its length)
Hydrolysis of nitrilesRCN + H3O+ (or OH-, then acid) -> RCOOH; nitriles come from alkyl halide + KCN, so the acid has one carbon more than the halide
Grignard reagent + CO2RMgX + CO2 (dry ice), then H3O+ -> RCOOH (one carbon more than RMgX)
Hydrolysis of esters, acid chlorides, anhydridesEach gives the carboxylic acid (ester hydrolysis with acid/alkali; saponification gives the sodium salt)

7. Physical Properties of Carboxylic Acids

  • The first three members are pungent liquids; up to C9 are liquids, higher ones are waxy solids. Benzoic acid is a white crystalline solid.
  • Boiling points are higher than alcohols, aldehydes and ketones of comparable mass — acids form strong intermolecular hydrogen bonds and exist largely as dimers (even in the vapour phase and in non-polar solvents like benzene).
  • The first four members are miscible with water (hydrogen bonding with water); solubility decreases with chain length. Benzoic acid is almost insoluble in cold water but dissolves in hot water (a purification trick — recrystallisation from hot water).

8. Acidity of Carboxylic Acids and Substituent Effects

  • Acids turn blue litmus red, react with metals, carbonates and hydrogencarbonates (CO2 effervescence — a simple test for –COOH), and form salts with NaOH.
  • Acidity is explained by resonance stabilisation of the carboxylate ion (RCOO-), in which the negative charge is shared equally by two oxygens. Carboxylic acids are stronger than phenols and alcohols (the phenoxide ion is less stabilised, and alkoxide has no resonance).
  • Electron-withdrawing groups (–I / –EWG) increase acidity by stabilising the carboxylate ion: F, Cl, Br, NO2, CN, CF3. The effect is stronger when the group is closer to –COOH.
  • Electron-donating groups (+I / alkyl groups) decrease acidity by destabilising the carboxylate ion.
  • Useful orders: FCH2COOH > ClCH2COOH > BrCH2COOH > CH3COOH (halogen electronegativity) Cl3C–COOH > Cl2CH–COOH > ClCH2–COOH > CH3COOH (more halogens, stronger acid) HCOOH > CH3COOH (formic acid is stronger — no +I methyl group) p-Nitrobenzoic acid > benzoic acid > p-methylbenzoic acid (EWG strengthens, EDG weakens)
  • In aromatic acids, ortho-substituted benzoic acids are generally the strongest of their series (ortho effect).

9. Reactions of Carboxylic Acids

ReactionConditionsProduct / point
Esterification (Fischer)RCOOH + R'OH, conc. H2SO4 or dry HCl gasEster RCOOR' + H2O; reversible — e.g. acetic acid + ethanol -> ethyl acetate
Hell–Volhard–Zelinsky (HVZ) reactionRCH2COOH + Cl2 or Br2, red phosphorusAlpha-halo acid — halogen enters the alpha position only; needs an alpha-hydrogen. Acetic acid + Br2/red P -> alpha-bromoacetic acid
DecarboxylationSoda lime (NaOH + CaO), heatAlkane with one carbon less: CH3COONa --soda lime, heat--> CH4 + Na2CO3. Two moles of methane weigh 32 g
ReductionLiAlH4 (or B2H6)Primary alcohol: CH3COOH -> CH3CH2OH. NaBH4 does NOT reduce carboxylic acids
With PCl5 / PCl3 / SOCl2—Acid chloride RCOCl (SOCl2 is preferred — the other products are gases that escape)
With P2O5, heat (dehydration)Strong heatingAcid anhydride (two acid molecules lose H2O); acetic acid -> acetic anhydride
With NH3, then heat—Amide: ammonium acetate --heat--> acetamide + H2O
Electrophilic substitution (benzoic acid)—–COOH is deactivating and meta-directing; benzoic acid gives m-substituted products, and does NOT undergo Friedel–Crafts reaction
Kolbe electrolysisElectrolysis of sodium/potassium salt solutionAlkane at the anode (decarboxylative coupling)

Formic acid is special: HCOOH contains both an aldehyde-like H–C=O part and –COOH, so it reduces Tollens' reagent and Fehling's solution (no other carboxylic acid does), is easily oxidised to CO2 + H2O, and on heating with conc. H2SO4 gives CO + H2O.

10. Uses of Carboxylic Acids

  • Acetic acid: vinegar (5–8% solution), solvent, and raw material for cellulose acetate and vinyl acetate.
  • Benzoic acid: its sodium salt (sodium benzoate) is a food preservative; the acid is used in medicines.
  • Formic acid: used in the leather, textile and rubber industries and as an antiseptic.
  • Higher fatty acids are used as soaps (sodium salts) and in paints and varnishes.

11. Important Facts — One-Liners (for last-minute revision)

1. The carbonyl carbon is sp2, trigonal planar (~120°) and electrophilic; nucleophiles attack it.

2. Reactivity order for nucleophilic addition: aldehydes > ketones; formaldehyde is the most reactive.

3. Rosenmund: RCOCl + H2/Pd–BaSO4 -> aldehyde. Stephen: RCN + SnCl2/HCl, then hydrolysis -> aldehyde.

4. Etard: toluene + CrO2Cl2 -> benzaldehyde; strong oxidation of toluene instead gives benzoic acid.

5. Gatterman–Koch: benzene + CO/HCl, AlCl3 -> benzaldehyde; it fails for phenol and aniline.

6. Hydration of ethyne gives acetaldehyde; hydration of every other alkyne gives a ketone.

7. Ozonolysis products identify the double bond: 3-methylbut-1-ene -> formaldehyde + 2-methylpropanal.

8. Boiling points: carboxylic acid > alcohol > aldehyde/ketone > hydrocarbon of comparable mass.

9. HCN gives a cyanohydrin; NH2OH gives an oxime; RNH2 gives a Schiff's base; alcohol gives an acetal; semicarbazide gives a semicarbazone.

10. 2,4-DNP gives an orange precipitate with BOTH aldehydes and ketones — it tests the carbonyl group.

11. Tollens' reagent (silver mirror) is given by aldehydes only among simple carbonyls; Fehling's is reduced by aliphatic aldehydes only — benzaldehyde fails Fehling.

12. Fehling's solution A is aqueous copper sulphate; solution B is alkaline Rochelle salt solution.

13. NaHSO3 addition products are crystalline — used to purify aldehydes and methyl ketones.

14. Grignard + carbonyl: formaldehyde -> primary alcohol, aldehyde -> secondary, ketone -> tertiary alcohol.

15. Clemmensen = Zn–Hg/conc. HCl (acidic); Wolff–Kishner = NH2NH2, KOH, heat (basic); both convert C=O into CH2.

16. Aldol needs an alpha-hydrogen and dilute alkali; acetone's aldol (diacetone alcohol) contains alcohol + ketone groups.

17. Benzaldehyde + acetophenone + dilute NaOH = cross aldol condensation.

18. Cannizzaro needs concentrated KOH and an aldehyde with no alpha-hydrogen (HCHO, C6H5CHO).

19. Iodoform test: yellow CHI3 precipitate from CH3CO– compounds and acetaldehyde (also ethanol and CH3CH(OH)– alcohols).

20. The –CHO and –COOH groups are deactivating and meta-directing in electrophilic substitution.

21. Acidity: EWG increases, EDG decreases; FCH2COOH > ClCH2COOH > CH3COOH; HCOOH > CH3COOH.

22. HVZ reaction: Br2 or Cl2 with red P puts the halogen at the alpha carbon of the acid.

23. Soda-lime decarboxylation: CH3COONa -> CH4; the alkane has one carbon less than the acid salt.

24. LiAlH4 reduces acids to primary alcohols; NaBH4 does not reduce carboxylic acids.

25. Carboxylic acids exist as hydrogen-bonded dimers, hence their high boiling points.

26. Formic acid is the only carboxylic acid that reduces Tollens' and Fehling's reagents.

12. Common Mistakes — Watch Out

1. Benzaldehyde does NOT reduce Fehling's solution — it does give Tollens' silver mirror. Only aliphatic aldehydes reduce Fehling's.

2. Ketones do not give Tollens' or Fehling's tests, but they DO give the 2,4-DNP test — 2,4-DNP cannot distinguish an aldehyde from a ketone.

3. Acetaldehyde is the only aldehyde that gives the iodoform test — and the test is for the CH3CO– (or CH3CH(OH)–) group, not for aldehydes in general.

4. Aldol versus Cannizzaro: alpha-hydrogen present + dilute alkali = aldol; no alpha-hydrogen + concentrated alkali = Cannizzaro. Benzaldehyde and formaldehyde can never give aldol.

5. Clemmensen is acidic (Zn–Hg/HCl), Wolff–Kishner is basic (NH2NH2/KOH) — choose by whether the rest of the molecule tolerates acid or base.

6. Rosenmund reduces an acid chloride, not an acid — and the poisoned Pd/BaSO4 catalyst is what stops the reduction at the aldehyde.

7. Hydration of alkynes: only ethyne gives an aldehyde (with HgSO4/H2SO4); propyne gives propanone, not propanal. Propanal from a terminal alkyne needs hydroboration–oxidation.

8. Gatterman–Koch does not work on phenol or aniline — do not apply it to activated rings.

9. HVZ halogen goes to the alpha carbon, and an acid with no alpha-hydrogen (e.g. trimethylacetic acid) gives no HVZ reaction.

10. NaBH4 reduces aldehydes and ketones but NOT carboxylic acids or esters — acids need LiAlH4 or B2H6.

11. Formic acid is stronger than acetic acid (HCOOH > CH3COOH) because the methyl group is electron-donating (+I).

12. More electron-withdrawing groups = stronger acid: trichloroacetic acid is far stronger than acetic acid; position also matters — the closer the EWG to –COOH, the stronger the effect.

13. Cu at 573 K does not oxidise a primary alcohol to the acid — it dehydrogenates it to the aldehyde. Acids need CrO3–H2SO4, acidified K2Cr2O7 or KMnO4.

14. In decarboxylation the product alkane has one carbon less — sodium ethanoate gives methane, not ethane.

Next step: after these notes, take the 30-question Objective Quiz of this chapter — including previous years' questions, with an explanation for every question.

एक टिप्पणी भेजें (0)
और नया पुराने