Equilibrium — Complete Notes
Subject: Chemistry • Class: 11 • Unit: Physical Chemistry (Equilibrium — chemical and ionic)
Place in the exam pattern: Questions come from this chapter every year — Kc/Kp numericals, Le Chatelier shifts, pH and buffer calculations, salt hydrolysis and Ksp/precipitation numericals are the most frequently asked parts. Almost every question is formula-based, so learn each formula with one worked example.
A state of equilibrium is reached when a reversible process stops changing at the macroscopic level, even though it continues at the molecular level. This chapter has two halves: physical/chemical equilibrium (reversible reactions, Kc, Kp, Q, Le Chatelier) and ionic equilibrium (acids and bases, pH, buffers, hydrolysis, solubility product).
1. Physical Equilibrium
When a physical process (melting, evaporation, dissolution) takes place in a closed system, the two opposite changes proceed at equal rates and the observable properties become constant.
| Physical equilibrium | System | Condition / key fact |
|---|---|---|
| Solid ⇌ Liquid | Ice ⇌ Water | At 0°C and 1 atm both phases coexist; melting and freezing rates are equal |
| Liquid ⇌ Vapour | Water ⇌ Water vapour (closed vessel) | Vapour pressure becomes constant — the saturated vapour pressure at that temperature |
| Solid ⇌ Vapour | Iodine / camphor sublimation | Solid directly in equilibrium with its vapour |
| Gas in liquid | CO2 in soda water (sealed bottle) | Rate of dissolution = rate of escape; governed by Henry's law |
| Solid in liquid | Sugar in saturated solution | Rate of dissolution = rate of crystallisation; undissolved solid remains |
Characteristics of physical equilibrium: (1) it is attained only in a closed system at a given temperature; (2) all measurable properties (pressure, concentration, density) become constant; (3) it is dynamic — both opposite processes continue at equal rates; (4) it can be approached from either side.
2. Chemical Equilibrium and Dynamic Equilibrium
For a reversible reaction aA + bB ⇌ cC + dD, the forward rate falls and the backward rate rises as the reaction proceeds, until the two rates become equal. Concentrations then stay constant — this is chemical equilibrium.
- Equilibrium is dynamic, not static: molecules keep reacting in both directions at the same rate, so there is no net change.
- At equilibrium the concentrations need not be equal — only the two rates are equal.
- A catalyst speeds up both directions equally: equilibrium is reached faster, but its position and the value of K do not change.
- Equilibrium can be established only in a closed system (no substance escapes).
3. Law of Mass Action and the Equilibrium Constant Kc
Law of mass action: at a given temperature, the rate of a reaction is proportional to the product of the molar concentrations of the reactants, each raised to the power of its stoichiometric coefficient.
For aA + bB ⇌ cC + dD at equilibrium:
Kc = ([C]^c [D]^d) / ([A]^a [B]^b)
- Kc is constant only at a fixed temperature; it does not depend on initial concentrations, volume or pressure.
- Pure solids and pure liquids are NOT included in the expression — their active mass is taken as 1.
- If the equation is reversed, K becomes 1/K. If the equation is multiplied by n, K becomes K^n. If two reactions are added, their K values multiply.
- Magnitude of K: K > 10^3 — reaction proceeds nearly to completion (products predominate); K < 10^-3 — reaction hardly proceeds (reactants predominate); K in between — appreciable amounts of both.
- Units of Kc: (mol L-1)^dn, where dn = (moles of gaseous + dissolved products) − (moles of reactants) in the balanced equation. K is often treated as dimensionless for numerical work.
Worked example: A + B ⇌ C + D has equilibrium concentrations [A] = 2, [B] = 3, [C] = 10, [D] = 6 mol L-1. Kc = (10 × 6)/(2 × 3) = 10. Also, ΔG° = −2.303 RT log Kc = −2.303 × 2 cal mol-1 K-1 × 300 K × log 10 = −1381.8 cal mol-1.
4. Kp and its Relation with Kc
For gaseous reactions, partial pressures can be used instead of concentrations:
Kp = Kc (RT)^dn, where dn = (total moles of gaseous products) − (total moles of gaseous reactants), R = 0.0821 L atm mol-1 K-1 and T is in kelvin.
| Reaction | dn | Kp vs Kc |
|---|---|---|
| H2(g) + I2(g) ⇌ 2HI(g) | 0 | Kp = Kc |
| CO(g) + H2O(g) ⇌ CO2(g) + H2(g) | 0 | Kp = Kc |
| 2BrCl(g) ⇌ Br2(g) + Cl2(g) | 0 | Kp = Kc |
| PCl5(g) ⇌ PCl3(g) + Cl2(g) | +1 | Kp = Kc × RT (Kp > Kc) |
| N2(g) + 3H2(g) ⇌ 2NH3(g) | −2 | Kp = Kc / (RT)^2 (Kp < Kc) |
| CaCO3(s) ⇌ CaO(s) + CO2(g) | +1 | Kp = p(CO2); only gases count |
Worked example: For N2O4(g) ⇌ 2NO2(g) at 300 K, Kc = 0.02. dn = 2 − 1 = +1, so Kp = 0.02 × (0.0821 × 300) = 0.02 × 24.63 = 0.49.
Heterogeneous equilibrium: when reactants/products are in different phases, only gaseous (and dissolved) species appear in K. Example: CaCO3(s) ⇌ CaO(s) + CO2(g) has Kc = [CO2] and Kp = p(CO2); the amounts of the two solids do not matter as long as some of each is present.
5. Reaction Quotient Q — Predicting the Direction
The reaction quotient Q has the same form as K but uses the concentrations at any moment (not just at equilibrium).
| Comparison | Prediction |
|---|---|
| Q < Kc | Reaction moves forward (towards products) |
| Q > Kc | Reaction moves backward (towards reactants) |
| Q = Kc | Reaction is at equilibrium |
Worked example: 2A ⇌ B + C has Kc = 4 × 10^-3. At some instant [A] = [B] = [C] = 2 × 10^-3 M. Q = ([B][C])/[A]^2 = (2 × 10^-3 × 2 × 10^-3)/(2 × 10^-3)^2 = 1. Since Q (1) > Kc (4 × 10^-3), the reaction has a tendency to go in the backward direction.
Degree of dissociation (α) link: for 2NO(g) ⇌ N2(g) + O2(g), Kc from equilibrium concentrations [N2] = 3.0 × 10^-3, [O2] = 4.2 × 10^-3, [NO] = 2.8 × 10^-3 M is Kc = (3.0 × 10^-3 × 4.2 × 10^-3)/(2.8 × 10^-3)^2 = 1.607. Starting with 0.1 M NO, Kc = 0.25 α^2/(1 − α)^2 gives α/(1 − α) = 2.535, so α = 0.717.
6. Le Chatelier's Principle
Statement: when a system at equilibrium is subjected to a change in concentration, pressure, volume or temperature, the equilibrium shifts in the direction that undoes (counteracts) the change.
| Change applied | Shift of equilibrium | Classic example |
|---|---|---|
| Concentration of a reactant increased | Forward (product side) | Adding N2 or H2 increases NH3 yield |
| Concentration of a product increased | Backward | Adding NH3 pushes N2 + 3H2 ⇌ 2NH3 to the left |
| Pressure increased (volume decreased) | Towards the side with fewer gas moles | N2 + 3H2 ⇌ 2NH3 (4 → 2 moles): forward |
| Pressure decreased | Towards the side with more gas moles | PCl5 ⇌ PCl3 + Cl2: forward on lowering pressure |
| Inert gas added at constant volume | No shift (partial pressures unchanged) | — |
| Inert gas added at constant pressure | Towards more gas moles (volume increases) | — |
| Temperature increased | Towards the endothermic direction | N2 + O2 ⇌ 2NO, ΔH = +180.7 kJ: NO yield rises at high T |
| Temperature decreased | Towards the exothermic direction | NH3 synthesis (ΔH negative) favoured at low T |
| Catalyst added | No shift — equilibrium reached faster only | Fe catalyst in Haber process |
Applied — Haber process (N2 + 3H2 ⇌ 2NH3, ΔH = −Q, exothermic): forward reaction is favoured by high pressure, low temperature and higher concentration of H2 (or N2). In practice a moderate temperature (~700 K) is used because at very low temperature the rate becomes too slow — a compromise between yield and rate.
Applied — NO formation (N2 + O2 ⇌ 2NO, ΔH = +180.7 kJ mol-1, endothermic): higher yield of NO is obtained at higher temperature and at higher concentration of N2 and of O2.
7. Acids and Bases — Three Concepts
| Concept | Acid | Base | Key point |
|---|---|---|---|
| Arrhenius | Gives H+ in aqueous solution (e.g. HCl, CH3COOH) | Gives OH− in aqueous solution (e.g. NaOH, NH4OH) | Limited to aqueous solutions; cannot explain basicity of NH3 or Na2CO3 fully |
| Bronsted–Lowry | Proton (H+) donor | Proton (H+) acceptor | Works in any solvent; gives conjugate acid–base pairs differing by one H+ |
| Lewis | Electron-pair acceptor | Electron-pair donor | Widest concept; BF3, AlCl3, metal ions are Lewis acids even without H |
Conjugate pairs: when an acid loses H+, what remains is its conjugate base; when a base gains H+, it becomes its conjugate acid.
- Conjugate base of H2O is OH−; conjugate base of HF is F−.
- Conjugate acid of NH3 is NH4+; conjugate acid of HSO4− is H2SO4.
- Amphiprotic species (can donate and accept H+): H2O, HCO3−, HSO4−, H2PO4−.
- Rule: a strong acid has a weak conjugate base, and vice versa. Acid strength order follows Ka: larger Ka = stronger acid.
- Lewis acids: BF3, AlCl3, Fe3+, H+ (empty orbital accepts a pair). Lewis bases: NH3, H2O, OH−, F− (lone pair donors). Example: BF3 + NH3 → H3N→BF3 adduct.
8. Ionisation of Weak Acids and Bases — Ka, Kb, Degree of Ionisation
Water itself ionises slightly: H2O ⇌ H+ + OH−, with ionic product Kw = [H+][OH−] = 1.0 × 10^-14 at 298 K. In pure water [H+] = [OH−] = 10^-7 M (neutral).
For a weak acid HA ⇌ H+ + A−: Ka = [H+][A−]/[HA]. For a weak base BOH ⇌ B+ + OH−: Kb = [B+][OH−]/[BOH]. Also pKa = −log Ka and pKb = −log Kb; for a conjugate pair in water, pKa + pKb = 14 (at 298 K).
Degree of ionisation (α) = fraction of molecules ionised. Ostwald's dilution law for a weak electrolyte of concentration C:
Ka = C α^2 / (1 − α); when α is small, α = sqrt(Ka / C) and [H+] = sqrt(Ka × C) for a weak acid; similarly [OH−] = sqrt(Kb × C) for a weak base.
- On dilution, α increases (but [H+] may fall because C falls faster).
- Polyprotic acids ionise stepwise with Ka1 > Ka2 > Ka3 (e.g. H3PO4): each step removes H+ from a more negatively charged species, so it becomes harder; the overall constant K = Ka1 × Ka2 × Ka3.
Worked example 1: A weak acid HA (0.1 mol L-1) is 1% dissociated at equilibrium. α = 0.01, so Ka = C α^2 = 0.1 × (0.01)^2 = 1 × 10^-5 (taking 1 − α ≈ 1).
Worked example 2: pH of 0.1 M acetic acid (Ka = 1.8 × 10^-5): [H+] = sqrt(1.8 × 10^-5 × 0.1) = sqrt(1.8 × 10^-6) = 1.34 × 10^-3 M, so pH = −log(1.34 × 10^-3) = 2.87.
9. The pH Scale
pH = −log[H+] (more exactly, −log of hydrogen-ion activity). At 298 K:
| pH | Nature of solution | [H+] |
|---|---|---|
| < 7 | Acidic | > 10^-7 M |
| = 7 | Neutral (pure water at 298 K) | = 10^-7 M |
| > 7 | Basic (alkaline) | < 10^-7 M |
Also pOH = −log[OH−] and pH + pOH = 14 at 298 K. Note: pH 7 is neutral only at 298 K — Kw changes with temperature, so at higher temperature neutral pH is less than 7 (the solution is still neutral because [H+] = [OH−]).
Worked examples:
- 0.01 M HCl (strong acid, fully ionised): [H+] = 10^-2, pH = 2.
- 0.005 M H2SO4 (both H+ taken as ionised at this level): [H+] = 2 × 0.005 = 0.01 M, pH = 2.
- 0.01 M NaOH: pOH = 2, so pH = 14 − 2 = 12.
- Mixing equal volumes of pH 3 and pH 5 strong-acid solutions: [H+] = (10^-3 + 10^-5)/2 ≈ 5.05 × 10^-4, pH ≈ 3.30 (never average the pH values directly).
10. Common Ion Effect
The ionisation of a weak electrolyte is suppressed by adding a strong electrolyte that supplies a common ion.
- Adding sodium acetate (CH3COONa) to acetic acid pushes CH3COOH ⇌ H+ + CH3COO− to the left: α and [H+] fall, pH rises.
- Adding NH4Cl to NH4OH suppresses its ionisation similarly.
- The common ion effect is the working principle of buffer solutions and is also used to control solubility (Section 13) and in qualitative analysis.
11. Buffer Solutions and the Henderson–Hasselbalch Equation
A buffer solution resists change in pH on adding a small amount of acid or base (or on dilution).
| Buffer type | Composition | Example |
|---|---|---|
| Acidic buffer | Weak acid + its salt with a strong base | CH3COOH + CH3COONa |
| Basic buffer | Weak base + its salt with a strong acid | NH4OH + NH4Cl |
A mixture like 100 mL of 0.1 M HCl + 200 mL of 0.1 M NH4OH leaves excess NH4OH with NH4Cl formed — a basic buffer. Equal moles of a weak acid and a strong base fully neutralise each other and do NOT form a buffer.
Henderson–Hasselbalch equations:
- Acidic buffer: pH = pKa + log([salt]/[acid])
- Basic buffer: pOH = pKb + log([salt]/[base])
Worked example: A solution contains 0.10 M sodium acetate and 0.01 M acetic acid (pKa = 4.57). pH = 4.57 + log(0.10/0.01) = 4.57 + 1 = 5.57.
How a buffer works: added H+ is consumed by the salt's anion (A− + H+ → HA); added OH− is consumed by the acid (HA + OH− → A− + H2O). Buffer capacity is maximum when [salt] = [acid], i.e. pH = pKa.
12. Hydrolysis of Salts
Salt ions react with water to produce H+ or OH− — this is hydrolysis. The nature of the solution depends on the parent acid and base:
| Salt type | Example | Solution nature | pH formula (298 K) |
|---|---|---|---|
| Strong acid + strong base | NaCl, KNO3 | Neutral (no hydrolysis) | pH = 7 |
| Strong acid + weak base | NH4Cl, NH4NO3 | Acidic (cation hydrolyses) | pH = 7 − (1/2)(pKb + log C) |
| Weak acid + strong base | CH3COONa, Na2CO3 | Basic (anion hydrolyses) | pH = 7 + (1/2)(pKa + log C) |
| Weak acid + weak base | CH3COONH4, dimethylammonium acetate | Depends on Ka vs Kb | pH = 7 + (1/2)(pKa − pKb) |
Worked example: Dimethylammonium acetate is a salt of a weak acid (acetic acid, pKa = 4.77) and a weak base (dimethylamine, pKb = 3.27). pH = 7 + (1/2)(4.77 − 3.27) = 7 + 0.75 = 7.75 — slightly basic because the acid is weaker (larger pKa) relative to the base... precisely, pKa > pKb makes the solution basic. For CH3COONH4, Ka ≈ Kb, so the solution is nearly neutral.
Explanation for NH4Cl: NH4+ + H2O ⇌ NH4OH + H+ — H+ is produced, so the solution is acidic; the Cl− ion (from strong acid HCl) does not hydrolyse.
13. Solubility Equilibrium and Ksp
For a sparingly soluble salt, e.g. AgCl(s) ⇌ Ag+(aq) + Cl−(aq), the equilibrium constant is the solubility product:
Ksp = [Ag+][Cl−] (the solid is excluded). In general, for AaBb(s) ⇌ a A + b B with molar solubility s: Ksp = (a s)^a (b s)^b.
| Salt type | Example | Ksp in terms of s |
|---|---|---|
| AB (1:1) | AgCl, BaSO4 | Ksp = s^2 |
| AB2 or A2B (1:2) | CaF2, Ag2CrO4 | Ksp = 4 s^3 |
| AB3 | Fe(OH)3 | Ksp = 27 s^4 |
| A3B2 | Ca3(PO4)2 | Ksp = 108 s^5 |
- Ksp alone does not compare solubilities of salts of different types — always convert to s first. Example (298 K): AgBr (Ksp = 5.0 × 10^-13, s = 7.1 × 10^-7), Zn(OH)2 (Ksp = 1.0 × 10^-15, Ksp = 4s^3, s = 6.3 × 10^-6), Hg2Cl2 (Ksp = 1.3 × 10^-18, Ksp = 4s^3, s = 6.9 × 10^-7). Solubility order: Zn(OH)2 > AgBr > Hg2Cl2 — the salt with the smallest Ksp is NOT the least soluble here because the stoichiometries differ.
- Common ion effect on solubility: solubility decreases in the presence of a common ion. AgCl in 0.1 M KCl: s = Ksp/[Cl−] = 10^-10/0.1 = 10^-9 M, versus s = 10^-5 M in pure water — a ratio of 10^-4.
Worked example 1: The pH of a saturated Ca(OH)2 solution is 9. pOH = 5, so [OH−] = 10^-5 M and solubility s = [OH−]/2 = 0.5 × 10^-5 M. Ksp = 4 s^3 = 4 × (0.5 × 10^-5)^3 = 0.5 × 10^-15.
Worked example 2: Solubility of Ni(OH)2 in 0.1 M NaOH (Ksp = 2 × 10^-15): s × (0.1)^2 = 2 × 10^-15, so s = 2 × 10^-13 M.
Worked example 3: A salt AB has Ksp = 4 × 10^-12. s = sqrt(Ksp) = 2 × 10^-6 mol L-1.
14. Predicting Precipitation — Qsp vs Ksp
Calculate the ionic product Qsp with the actual ion concentrations (after mixing, remember to halve concentrations when equal volumes are mixed) and compare with Ksp:
| Comparison | Result |
|---|---|
| Qsp > Ksp | Precipitation occurs (solution is supersaturated) |
| Qsp = Ksp | Saturated solution — precipitation is just about to begin |
| Qsp < Ksp | No precipitation (unsaturated; more solid can dissolve) |
Worked example: Equal volumes of 1 × 10^-4 M AgNO3 and 1 × 10^-4 M NaCl are mixed. After mixing, [Ag+] = [Cl−] = 5 × 10^-5 M. Qsp = (5 × 10^-5)^2 = 2.5 × 10^-9, which is greater than Ksp of AgCl (1.8 × 10^-10) — so AgCl precipitates.
15. Important Facts — One-Liners (for last-minute revision)
1. Equilibrium is dynamic: forward and backward rates are equal, concentrations are constant but not necessarily equal.
2. A catalyst never changes K or the equilibrium position — it only makes equilibrium arrive faster.
3. Kc = [products]^coeff / [reactants]^coeff; pure solids and pure liquids are excluded (active mass = 1).
4. Reversing a reaction inverts K; multiplying the equation by n raises K to the power n; adding reactions multiplies their K values.
5. Kp = Kc(RT)^dn; Kp = Kc only when dn (gas moles) = 0, e.g. H2 + I2 ⇌ 2HI.
6. Q < Kc → forward; Q > Kc → backward; Q = Kc → equilibrium.
7. ΔG° = −2.303 RT log K; for sucrose hydrolysis with Kc = 2 × 10^13 at 300 K, ΔG° = −8.314 × 300 × ln(2 × 10^13) J mol-1.
8. Le Chatelier: raising pressure shifts equilibrium towards fewer gas moles; raising temperature shifts it towards the endothermic side.
9. Inert gas at constant volume causes no shift; at constant pressure it shifts towards more gas moles.
10. Haber process is favoured by high pressure, low temperature, excess N2/H2 — but a moderate temperature is used for a usable rate.
11. Arrhenius: acid gives H+, base gives OH− (aqueous only). Bronsted: acid = H+ donor, base = H+ acceptor. Lewis: acid = electron-pair acceptor, base = electron-pair donor.
12. Conjugate base of H2O is OH− and of HF is F−; conjugate acid of NH3 is NH4+.
13. BF3 is a Lewis acid (electron-deficient); NH3 and H2O are Lewis bases.
14. Kw = 10^-14 at 298 K; in neutral water [H+] = [OH−] = 10^-7 M; pKa + pKb = 14 for a conjugate pair.
15. Weak acid: [H+] = sqrt(Ka × C) and α = sqrt(Ka/C); α increases on dilution (Ostwald's law).
16. For polyprotic acids Ka1 > Ka2 > Ka3 and overall K = Ka1 × Ka2 × Ka3.
17. pH = −log[H+]; pH + pOH = 14 at 298 K; pH 7 is neutral only at 298 K.
18. Common ion effect suppresses the ionisation of a weak acid/base — the basis of buffers.
19. Acidic buffer = weak acid + its salt with a strong base; pH = pKa + log([salt]/[acid]).
20. Basic buffer = weak base + its salt with a strong acid; a basic buffer forms from excess NH4OH + NH4Cl.
21. Salt of strong acid + weak base (NH4Cl) is acidic; weak acid + strong base (CH3COONa) is basic; strong + strong (NaCl) is neutral.
22. Salt of weak acid + weak base: pH = 7 + (1/2)(pKa − pKb) — independent of concentration.
23. For AB-type salts Ksp = s^2; for AB2/A2B salts Ksp = 4s^3 — compare solubilities only through s, never through Ksp directly.
24. Common ion lowers solubility: AgCl is 10^4 times less soluble in 0.1 M KCl than in water (Ksp = 10^-10).
25. Precipitation occurs when Qsp > Ksp; after mixing equal volumes, halve each concentration before calculating Qsp.
26. In a saturated Ca(OH)2 solution of pH 9, Ksp = 0.5 × 10^-15 (s = [OH−]/2, Ksp = 4s^3).
16. Common Mistakes / Take Care
1. Including solids in K: pure solids and pure liquids never appear in Kc/Kp expressions — CaCO3(s) ⇌ CaO(s) + CO2(g) has Kp = p(CO2) only.
2. Kp = Kc always — wrong: they are equal only when dn = 0. For PCl5 ⇌ PCl3 + Cl2 (dn = +1) Kp ≠ Kc.
3. Catalyst shifting equilibrium — wrong: a catalyst changes neither K nor the position; it only shortens the time to reach equilibrium.
4. Inert gas confusion: at constant volume there is NO shift; students often wrongly apply the pressure rule.
5. Averaging pH values on mixing — wrong: always convert to [H+], average the concentrations (with volumes), then take −log.
6. pH of a weak acid = −log C — wrong: use [H+] = sqrt(Ka × C); 0.1 M acetic acid has pH 2.87, not 1.
7. Forgetting the factor 2: 0.005 M H2SO4 gives [H+] = 0.01 M (pH 2), and for Ca(OH)2 solubility s = [OH−]/2, not [OH−].
8. pH 7 = neutral at all temperatures — wrong: neutrality means [H+] = [OH−]; pH 7 is neutral only at 298 K.
9. Buffer from complete neutralisation — wrong: equal moles of weak acid and strong base leave only the salt (hydrolysing), not a buffer; a buffer needs BOTH members of the pair in appreciable amounts.
10. Comparing Ksp values directly across salt types — wrong: Zn(OH)2 (Ksp = 10^-15) is MORE soluble than AgBr (Ksp = 5 × 10^-13) because Ksp = 4s^3 vs s^2. Convert to s first.
11. Forgetting dilution on mixing in precipitation problems: mixing equal volumes halves each ion concentration before Qsp is calculated.
12. Salt-hydrolysis mix-ups: NH4Cl is acidic (weak base's salt), CH3COONa is basic (weak acid's salt) — decide from the WEAK partner, whose ion hydrolyses.
13. Sign of ΔH in Le Chatelier temperature questions: heating favours the endothermic direction — for exothermic NH3 synthesis heating LOWERS the yield, while for endothermic NO formation heating RAISES it.
14. Q written with equilibrium concentrations: Q uses the concentrations at the given instant; only when Q = K is the system at equilibrium.
Next step: after these notes, take the 30-question Objective Quiz of this chapter — with previous years' questions included, and an explanation for every question.
