🎓 RAS • RPSC • NEET • SSC • RRB • Teaching परीक्षाओं की तैयारी
मुफ़्त Notes, Daily Current Affairs और Online Mock Tests — सब कुछ एक ही जगह
🩺 NEET (UG) Hub — Notes, Quiz और Mock Tests
Class 11-12 Chapter-wise Notes (Hindi + English), 30-Question Quiz और PYQ Mock Tests — बिल्कुल मुफ़्त
🌿 Biology 🧪 Chemistry ⚛ Physics 📝 NEET Mock Tests — Free

NEET Chemistry Notes: Some Basic Principles of Organic Chemistry (GOC) — Complete Notes

 


Some Basic Principles of Organic Chemistry (GOC) — Complete Notes

Subject: Chemistry • Class: 11 • Unit: Organic Chemistry — Basic Principles and Techniques Place in the exam pattern: Questions come from this chapter every year — IUPAC naming, isomerism, carbocation stability and the electronic effects (inductive, resonance, hyperconjugation) are the most frequently asked parts. Purification and characterisation of organic compounds is a separate topic and is NOT covered here.

Organic chemistry is the study of compounds of carbon. Carbon shows tetravalency (four covalent bonds) and catenation (self-linking into long chains, branches and rings), which is why millions of organic compounds exist. The vital force theory (that organic compounds could only be made inside living organisms) was discarded after Wohler synthesised urea, an organic compound, from ammonium cyanate, an inorganic compound, in 1828. This chapter gives the language and the basic ideas of the whole of organic chemistry — how compounds are classified and named, how isomers arise, how electrons move inside a molecule, and how reactions begin.

1. Classification of Organic Compounds

BasisClassesExamples (plain formulas)
Chain / skeletonAcyclic (aliphatic) — open chain, straight or branchedCH3-CH2-CH3 (propane), CH3-CH=CH2 (propene)
Cyclic (ring) — closed ringcyclohexane, benzene
Ring typeAlicyclic — ring behaving like aliphatic compoundscyclopropane, cyclohexane
Aromatic — benzene ring or related ring with delocalised pi electronsbenzene (C6H6), toluene
Heterocyclic — ring containing O, N or S besides carbonfuran, pyridine, thiophene
Homocyclic vs heterocyclicHomocyclic ring has only carbon atoms; heterocyclic ring has at least one heteroatom (O, N, S)benzene = homocyclic; pyridine = heterocyclic

Functional Groups and Homologous Series

  • A functional group is an atom or group of atoms that decides the chemical properties of the compound: -OH (alcohol), -CHO (aldehyde), -CO- (ketone), -COOH (carboxylic acid), -NH2 (amine), -X (halide), C=C (alkene), C#C written as C triple bond C (alkyne).
  • A homologous series is a family of compounds with the same functional group, similar chemical properties, and successive members differing by -CH2- (14 u in molar mass), e.g. CH4, C2H6, C3H8 in alkanes.
  • Degree of carbon: a carbon attached to one other carbon is primary (1 degree), to two is secondary (2 degree), to three is tertiary (3 degree), and to four is quaternary (4 degree).

2. IUPAC Nomenclature — Basics

The systematic name is built as: Prefix (substituents) + Word root (chain length) + Suffix (functional group).

Word rootChain lengthWord rootChain length
Meth-1 CHex-6 C
Eth-2 CHept-7 C
Prop-3 COct-8 C
But-4 CNon-9 C
Pent-5 CDec-10 C

Suffixes: single bond = -ane, double bond = -ene, triple bond = -yne, -OH = -ol, -CHO = -al, -CO- = -one, -COOH = -oic acid, -NH2 = -amine, -CN = -nitrile, -COOR = -oate, -X = halo- prefix.

Rules that decide most questions

1. Longest carbon chain containing the principal functional group (and maximum multiple bonds) is the parent chain.

2. Numbering gives the lowest locants — first to the principal functional group, then to multiple bonds, then to substituents.

3. Substituents are written alphabetically (di-, tri- prefixes are ignored for alphabetising); their positions are shown by locants.

4. For -COOH, -CHO, -CN, -COOR the functional carbon is carbon-1 of the chain (it is included in the chain count).

5. Priority order of functional groups (decreasing): -COOH > anhydride > -COOR (ester) > -COCl > -CONH2 (amide) > -CN > -CHO > -CO- (ketone) > -OH > -SH > -NH2 > C=C / C triple bond C > -X, -NO2, -OR (these last are always prefixes).

6. Examples: CH3-CH(CH3)-CH2-CH3 = 2-methylbutane; CH3-CH(OH)-CH3 = propan-2-ol; CH3-CH=CH-CH3 = but-2-ene; a C6H14 compound with two tertiary carbons = 2,3-dimethylbutane; CH3COOH = ethanoic acid; CH3-CH2-CHO = propanal.

7. Retained/common names still used: isopropyl, isobutyl, tert-butyl, neopentyl groups; toluene, phenol, aniline as parent names.

3. Isomerism

Compounds with the same molecular formula but different structures or arrangements are isomers.

3.1 Structural Isomerism (different connectivity)

TypeWhat differsExample
Chain isomerismCarbon skeletonn-butane and 2-methylpropane (isobutane), both C4H10
Position isomerismPosition of functional group / multiple bondpropan-1-ol and propan-2-ol; but-1-ene and but-2-ene
Functional group isomerismFunctional group itselfethanol (CH3CH2OH) and methoxymethane (CH3OCH3), both C2H6O; propanal and propanone, both C3H6O
MetamerismAlkyl groups around a polyvalent functional group (ether, ketone, amine)ethoxyethane and 1-methoxypropane, both C4H10O
TautomerismSpecial functional isomerism — interconversion by shifting of a proton (keto-enol)propanone (keto form) and propen-2-ol (enol form)

3.2 Stereoisomerism (same connectivity, different space arrangement)

  • Geometrical (cis-trans / E-Z) isomerism: arises due to restricted rotation about a double bond (or in rings). Each doubly bonded carbon must carry two different groups. cis = similar groups on the same side; trans = on opposite sides. Example: but-2-ene exists as cis and trans; 3,4-dimethylhex-3-ene shows geometrical isomerism, while 2-methylprop-1-ene and 2,3-dimethylbut-2-ene do not (one carbon carries two identical groups). 1,2-dimethylcyclohexane can exist as cis-trans isomers because ring bonds cannot rotate freely.
  • Optical isomerism: a molecule with an asymmetric (chiral) carbon — a carbon attached to four different groups — is non-superimposable on its mirror image and rotates plane-polarised light. The two mirror-image forms are enantiomers; they are non-superimposable mirror images (the statement that they are superimposable is wrong). An equal mixture of the two enantiomers is a racemic mixture and shows zero optical rotation. Forms that are stereoisomers but not mirror images are diastereomers; a compound with stereocentres but an internal plane of symmetry is a meso compound (optically inactive).
  • Conformational isomerism: different arrangements obtained by rotation about a single bond (no bond breaking). In ethane, the staggered form (dihedral angle 60 degrees) is the most stable and the eclipsed form (dihedral angle 0 degrees) is the least stable. In butane, the anti form is most stable and the gauche forms lie in between.

4. Electronic Displacement Effects



EffectWhere it actsPermanent / TemporaryKey point
Inductive effect (I effect)Through sigma bondsPermanentPolarisatio

...[truncated 12012 chars]n of a sigma bond due to an electronegative atom/group |

Electromeric effect (E effect)Through pi bonds, only in presence of an attacking reagentTemporaryComplete transfer of a shared pair of pi electrons to one atom
Resonance / Mesomeric effect (R / M effect)Through pi bonds in conjugated systemsPermanentDelocalisation of pi electrons; shown by contributing (canonical) structures
HyperconjugationSigma C-H bond next to a pi system or empty p orbitalPermanentDelocalisation of sigma electrons of an alpha C-H bond; also called no-bond resonance

4.1 Inductive Effect

  • Electron-withdrawing groups show -I effect: -NO2 > -CN > -F > -Cl > -Br > -I, and -COOH, -OR, -OH also withdraw.
  • Electron-releasing alkyl groups show +I effect: (CH3)3C- > (CH3)2CH- > CH3CH2- > CH3-.
  • The effect decreases rapidly with distance and is almost negligible after 3-4 bonds.
  • Application — acid strength: electron-withdrawing groups stabilise the carboxylate ion and increase acidity; +I groups decrease it. Hence for aliphatic acids: HCOOH > CH3COOH > (CH3)2CHCOOH > (CH3)3C-COOH (decreasing acidity).

4.2 Electromeric Effect

  • On the demand of an attacking reagent, the pi electrons of a multiple bond shift completely to one of the atoms. +E effect: pi electrons shift towards the atom where the reagent attaches; -E effect: they shift away from it. The effect vanishes when the reagent is removed.
  • When inductive and electromeric effects act in opposite directions in the same molecule, the electromeric effect predominates (the inductive effect does NOT predominate).

4.3 Resonance

  • When one structure cannot explain all properties, the molecule is a resonance hybrid of two or more canonical (contributing) structures. Benzene is the classic case: C-C bonds are all equal (139 pm, between single 154 pm and double 134 pm).
  • Conditions: the system must be conjugated (alternate single and double bonds, or a double bond next to a lone pair / empty orbital / charge) and the atoms involved must be planar (same plane) so p orbitals can overlap.
  • Resonance increases stability (resonance energy), equalises bond lengths and spreads charge. Hepta-1,3-diene has conjugated double bonds (alternate single-double), unlike hepta-1,4-diene (isolated).
  • +R groups (-OH, -NH2, -OR, halogens on a ring) donate electrons into the pi system; -R groups (-NO2, -CN, -CHO, -COOH) withdraw electrons from it.

4.4 Hyperconjugation

  • Delocalisation of sigma electrons of a C-H bond of an alpha carbon into an adjacent pi system or an empty p orbital (as in a carbocation).
  • It explains why a tert-butyl carbocation is more stable than a sec-butyl carbocation and why a methyl group attached to a positively charged carbon stabilises the carbocation: more alpha C-H bonds means more hyperconjugative structures (tert-butyl has 9 alpha H, ethyl has 3, methyl has 0).
  • It is also observed in alkenes (propene is more stable than ethene) and in o-xylene (hyperconjugation IS observed there).

5. Bond Fission (Breaking of a Covalent Bond)

TypeHow the bond breaksProductsFavoured by
Homolytic fissionEach atom takes one electron of the shared pairFree radicals (neutral, one unpaired electron)Heat, light (peroxides, UV) — mainly in gas phase / non-polar solvents
Heterolytic fissionOne atom takes both electrons of the shared pairIons — a carbocation and a carbanion (or an ion pair with a heteroatom)Polar solvents, which stabilise ions
  • In heterolytic cleavage of a C-X bond where X is more electronegative (e.g. C-Cl), carbon gets the positive charge (carbocation) and X takes the electron pair (Cl-).
  • In heterolytic cleavage where carbon keeps the pair (e.g. C-Li, C-Mg bonds), carbon gets the negative charge (carbanionic character).

6. Reactive Intermediates

IntermediateCharge / electronsHybridisation & shapeStability order
Carbocation (e.g. CH3+, (CH3)3C+)Positive; 6 valence electrons; empty p orbitalsp2, planar (trigonal)3 degree > 2 degree > 1 degree > CH3+ (by +I and hyperconjugation); resonance-stabilised (benzyl, allyl) are extra stable
Carbanion (e.g. CH3-, CH3CH2-)Negative; 8 electrons with a lone pairsp3, pyramidal (like ammonia)Opposite order: CH3- > 1 degree > 2 degree > 3 degree; -I / resonance groups stabilise it
Free radical (e.g. CH3., (CH3)3C.)Neutral; 7 electrons, one unpairedsp2, planar (or near-planar)3 degree > 2 degree > 1 degree > CH3. (same as carbocations — hyperconjugation)
Carbene (:CH2)Neutral; 6 electrons, two non-bonded electronsSinglet = sp2 bent; triplet = sp linearVery reactive; inserts into C-H bonds and adds to double bonds
BenzyneNeutral; a triple bond inside a benzene ringHighly strained ring intermediateVery reactive; formed from chlorobenzene with strong base (elimination-addition)
  • Carbocations can rearrange (hydride or alkyl shift) to a more stable carbocation — a frequent trap in questions.
  • Order to remember: for carbocations and free radicals, more substituted = more stable; for carbanions, less substituted = more stable (alkyl groups push electrons onto an already negative carbon).

7. Electrophiles and Nucleophiles

Electrophile (E+)Nucleophile (Nu-)
MeaningElectron-pair acceptor — electron-lovingElectron-pair donor — nucleus-loving
Charge / naturePositive or neutral with an empty orbital / electron-deficient centreNegative, or neutral with a lone pair / pi electrons
ExamplesH+, Br+, NO2+, BF3, AlCl3, SO3, carbocations, CO2 carbonOH-, CN-, Br-, NH3, H2O, ROH, carbanions, alkenes (pi electrons)
AttacksElectron-rich centre (double bond, negative carbon)Electron-deficient centre (carbocation, carbonyl carbon)
  • Electrophiles are Lewis acids and nucleophiles are Lewis bases — the same idea in two languages.
  • A species like H2O or NH3 can act as a nucleophile through its lone pair even though it is neutral.

8. Types of Organic Reactions

TypeWhat happensExample (plain text)
AdditionReagent adds across a multiple bond; nothing is lostCH2=CH2 + HBr → CH3-CH2Br (electrophilic addition)
EliminationTwo groups leave from adjacent atoms; a multiple bond formsCH3-CH2Br + KOH (alc.) → CH2=CH2 + KBr + H2O
SubstitutionOne atom/group replaces anotherCH4 + Cl2 (sunlight) → CH3Cl + HCl (free-radical substitution); CH3Br + OH- → CH3OH + Br- (nucleophilic substitution)
RearrangementAtoms of the same molecule reorganise into an isomeric product, often via a carbocation shiftA less stable carbocation rearranges by a hydride shift to a more stable carbocation before the product forms
  • By mechanism, reactions are also classed as electrophilic, nucleophilic or free-radical according to the attacking species.

9. Important Facts — One-Liners (for last-minute revision)

1. Carbon is tetravalent and shows catenation — the twin reasons for the huge number of organic compounds.

2. Wohler (1828) made urea from ammonium cyanate and ended the vital force theory.

3. Successive members of a homologous series differ by -CH2- (14 u).

4. Functional-group priority: -COOH is the highest; -OH, -NH2, C=C are lower; -X, -NO2, -OR are only prefixes, never suffixes.

5. For -COOH, -CHO, -CN, the functional carbon is C-1 and is counted in the parent chain.

6. C6H14 with two tertiary carbons = 2,3-dimethylbutane.

7. Ethanol and methoxymethane (both C2H6O) are functional group isomers.

8. Geometrical isomerism needs restricted rotation and two different groups on each doubly bonded carbon.

9. 3,4-dimethylhex-3-ene shows geometrical isomerism; 2,3-dimethylbut-2-ene does not.

10. A racemic mixture shows zero optical rotation; enantiomers are non-superimposable mirror images.

11. The least stable conformer of ethane is eclipsed, dihedral angle 0 degrees; staggered (60 degrees) is the most stable.

12. Pent-2-en-4-yne has 10 sigma and 3 pi bonds.

13. Inductive effect is permanent and acts through sigma bonds; electromeric effect is temporary and acts through pi bonds only in the presence of a reagent.

14. When inductive and electromeric effects oppose each other, the electromeric effect predominates.

15. -I order: -NO2 > -CN > -F > -Cl > -Br > -I. +I order: (CH3)3C- > (CH3)2CH- > CH3CH2- > CH3-.

16. Acid strength of aliphatic acids: HCOOH > CH3COOH > (CH3)2CHCOOH > (CH3)3C-COOH.

17. Hepta-1,3-diene is the conjugated diene; resonance needs a conjugated, planar system.

18. A tert-butyl carbocation beats a sec-butyl carbocation because of hyperconjugation (9 alpha H vs fewer), and a methyl group on a C+ carbon stabilises it by hyperconjugation.

19. Carbocation and free-radical stability: 3 degree > 2 degree > 1 degree > methyl; carbanion stability is the reverse.

20. Homolytic fission gives free radicals (light/heat); heterolytic fission gives ions (polar solvent).

21. BF3, AlCl3, H+, NO2+ are electrophiles (Lewis acids); OH-, CN-, NH3, H2O are nucleophiles (Lewis bases).

22. A carbocation is sp2 and planar with an empty p orbital; a carbanion is sp3 and pyramidal.

23. Isomeric pentanes boil in the order n-pentane > isopentane > neopentane — more branching means a more spherical shape, smaller surface area and weaker intermolecular forces.

24. Cyclic ethers of formula C4H8O have 10 isomers in total (structural + stereo) — isomer-counting questions must include stereoisomers when asked.

10. Common Mistakes — Watch Out

1. Counting the -COOH carbon wrong: in ethanoic acid the chain has 2 carbons including the -COOH carbon — it is C-1, never a side chain.

2. Treating -X, -NO2, -OR as suffix groups: they are always prefixes (chloro-, nitro-, alkoxy-); the suffix comes only from the highest-priority group present.

3. Alphabetising with di-/tri-: multiplicative prefixes are ignored — dimethyl (m) comes before ethyl (e is compared with m, so ethyl first: e < m). Numbering, however, follows lowest locants, not alphabet.

4. Geometrical isomerism in 2-methylprop-1-ene or 2,3-dimethylbut-2-ene: impossible — one doubly bonded carbon carries two identical groups.

5. Saying enantiomers are superimposable: they are NON-superimposable mirror images; superimposable mirror images mean an achiral molecule.

6. Reversing carbanion stability: alkyl groups destabilise a carbanion (+I pushes electrons onto negative carbon), so CH3- > 1 degree > 2 degree > 3 degree — the exact reverse of carbocations.

7. Crediting -I of CH3 for carbocation stability: methyl stabilises C+ by hyperconjugation (and +I), and exam keys ask specifically for hyperconjugation when the comparison is tert-butyl vs sec-butyl.

8. Calling the electromeric effect permanent: it exists only while the attacking reagent is present; the inductive effect is the permanent one.

9. Saying the inductive effect predominates over the electromeric effect: when they oppose, the electromeric effect predominates.

10. Mixing up homolytic and heterolytic fission: homo = equal sharing of the electron pair (radicals); hetero = both electrons to one atom (ions).

11. Calling NH3 / H2O electrophiles: neutral molecules with lone pairs are nucleophiles; BF3 and AlCl3 (empty orbital, no lone pair) are electrophiles.

12. Forgetting stereoisomers in counting questions: when a question says "structural as well as stereoisomers", add the cis-trans / optical forms too (C4H8O cyclic ethers = 10, not fewer).

13. Assuming more branching raises boiling point: branching lowers it (n-pentane > isopentane > neopentane) because the molecule becomes spherical with less contact area.

14. Resonance structures are not real, separate molecules: the true structure is the single hybrid; canonical forms never exist separately and atoms do not move — only pi electrons / lone pairs are redrawn.

Next step: after these notes, take the 30-question Objective Quiz of this chapter — including previous years' questions, with an explanation for every question.

एक टिप्पणी भेजें (0)
और नया पुराने