Classification of Elements and Periodicity in Properties — Complete Notes
Subject: Chemistry • Class: 11 • Unit: Periodic Table and Periodicity
Place in the exam pattern: Questions come from this chapter every year — orders of ionisation enthalpy (with the Be > B and N > O exceptions), electron gain enthalpy (Cl > F), atomic/ionic radii, isoelectronic species, electronegativity orders and the IUPAC names of elements with Z > 100 are the most frequently asked parts.
Elements show a regular repetition of properties when arranged in order of increasing atomic number. This repetition is called periodicity, and it arises because the outer (valence-shell) electronic configuration repeats at regular intervals. This chapter traces how the periodic table developed, how the modern table is organised, and how the important properties — size, ionisation enthalpy, electron gain enthalpy, electronegativity, valency and reactivity — vary across periods and down groups.
1. Genesis of Periodic Classification (in brief)
- Dobereiner's triads (1829): groups of three similar elements (triads) in which the atomic mass of the middle element is nearly the average of the other two, e.g. (Li, Na, K), (Ca, Sr, Ba), (Cl, Br, I). The idea worked only for a few elements.
- Newlands' law of octaves (1865): when elements are arranged by increasing atomic mass, the eighth element resembles the first, like the eighth note in music. It worked only up to calcium and failed for heavier elements.
- Mendeleev's periodic table (1869): elements arranged by increasing atomic mass and chemical properties; the periodic law stated that the properties of elements are a periodic function of their atomic masses. Mendeleev left gaps for undiscovered elements and predicted their properties — eka-boron (Sc), eka-aluminium (Ga) and eka-silicon (Ge) were later found with properties very close to his predictions. Limitations: position of hydrogen unclear, isotopes could not be placed, and a few pairs (e.g. Ar/K, Co/Ni) were out of mass order.
- Modern periodic law (Moseley, 1913): X-ray studies showed that the atomic number (Z) is the fundamental property of an element. Modern periodic law: the physical and chemical properties of elements are a periodic function of their atomic numbers. This removed the mass-order anomalies (Ar, Z = 18 before K, Z = 19).
2. The Modern Periodic Table — Structure
- Periods (horizontal rows): 7. The period number equals the highest principal quantum number (n) of the elements in it. Period 1 has 2 elements, periods 2 and 3 have 8 each, periods 4 and 5 have 18 each, period 6 has 32, and period 7 is incomplete (32 elements placed so far). The 14 lanthanoids (Ce to Lu) and 14 actinoids (Th to Lr) are shown in two separate rows below the main table.
- Groups (vertical columns): 18, numbered 1 to 18. Elements of a group have the same valence-shell configuration and similar chemical properties.
- Blocks: the table is divided by the subshell that receives the last electron — s-block (groups 1–2, last electron in s; general configuration ns1-2), p-block (groups 13–18, np1-6), d-block (groups 3–12, transition elements, (n−1)d1-10 ns0-2) and f-block (inner-transition elements, lanthanoids and actinoids).
- Types of elements: metals (left and centre, the great majority), non-metals (top right, in the p-block) and metalloids/semimetals (Si, Ge, As, Sb, Te, Po, At) along the zig-zag boundary. Noble gases form group 18; their valence shell is complete (ns2 np6, except He = 1s2).
| Block | Groups | Last electron enters | General outer configuration | Character |
|---|---|---|---|---|
| s-block | 1–2 | s-subshell | ns1-2 | Reactive metals (alkali, alkaline earth) |
| p-block | 13–18 | p-subshell | ns2 np1-6 | Metals, metalloids, non-metals, noble gases |
| d-block | 3–12 | d-subshell | (n−1)d1-10 ns0-2 | Transition metals |
| f-block | Below the table | f-subshell | (n−2)f1-14 (n−1)d0-1 ns2 | Inner-transition (lanthanoids, actinoids) |
3. IUPAC Nomenclature of Elements with Z > 100
For elements not yet given an official name, a systematic (temporary) name is built from roots for the digits of the atomic number, ending in -ium:
| Digit | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
|---|---|---|---|---|---|---|---|---|---|---|
| Root | nil | un | bi | tri | quad | pent | hex | sept | oct | enn |
Examples: Z = 101 Unnilunium (Unu) — official name Mendelevium (Md); Z = 103 Unniltrium (Unt) — Lawrencium (Lr); Z = 106 Unnilhexium (Unh) — Seaborgium (Sg); Z = 110 Ununnilium (Uun) — Darmstadtium (Ds); Z = 111 Unununnium (Uuu) — Roentgenium (Rg). Note carefully: 110 is Darmstadtium and 111 is Roentgenium — pairing Unununnium (111) with Darmstadtium is the classic incorrect match. The symbol is formed from the first letters of the roots.
4. Screening Effect and Effective Nuclear Charge
Inner electrons shield (screen) the outer electrons from the full nuclear charge. The net charge actually felt by a valence electron is the effective nuclear charge, Zeff = Z − S, where S is the screening (shielding) constant. Across a period, electrons are added to the same shell, which shields poorly, so Zeff increases from left to right — this single fact explains most period trends: atoms become smaller, hold their electrons more tightly (ionisation enthalpy rises) and attract shared electrons more strongly (electronegativity rises). Down a group, a new shell is added, so size increases in spite of the higher Z.
5. Atomic Radius
- Atomic radius is the distance from the nucleus to the outermost shell. Because atoms have no sharp boundary, practical radii are used: covalent radius (half the distance between nuclei of two identical bonded atoms), metallic radius (half the distance between nuclei in a metal crystal) and van der Waals radius (half the distance between two non-bonded neighbouring atoms; always the largest of the three for an element). Radii are measured in picometres (pm); 1 pm = 10^-12 m.
- Across a period: radius decreases (Zeff increases, the same shell is pulled closer). Second period (pm): Li 152 > Be 111 > B 88 > C 77 > N 74 > O 66 > F 64. So for Li, Be, B, C the decreasing order is Li > Be > B > C.
- Down a group: radius increases (a new shell is added at each step): Li < Na < K < Rb < Cs.
- Lanthanoid contraction: across the lanthanoids the poor shielding of 4f electrons makes the size contract steadily; as a result, elements just below them are unusually small — Zr (Z = 40) and Hf (Z = 72) have almost identical atomic and ionic radii and very similar chemistry, and the 4d and 5d transition series resemble each other closely in size.
6. Ionic Radius and Isoelectronic Species
- A cation is always smaller than its parent atom (an electron, often a whole shell, is lost, and Zeff per electron rises): Na+ < Na, Fe3+ < Fe2+ < Fe. An anion is always larger than its parent atom (the added electron increases repulsion while Z is unchanged): F- > F, O2- > O.
- Isoelectronic species have the same number of electrons (and the same configuration). For an isoelectronic series, radius decreases as nuclear charge (Z) increases, because the same electrons are pulled by a larger charge. Example (all 10 electrons): N3- (171) > O2- (140) > F- (133) > Na+ (102) > Mg2+ (72) > Al3+ (53) pm. Another standard set (18 electrons): Ca2+, Ar, K+ and Cl- (and S2-) are all isoelectronic, with radius order S2- > Cl- > Ar > K+ > Ca2+.
| Species | Na+ | Mg2+ | Al3+ | F- | O2- | N3- |
|---|---|---|---|---|---|---|
| Electrons | 10 | 10 | 10 | 10 | 10 | 10 |
| Z | 11 | 12 | 13 | 9 | 8 | 7 |
| Radius (pm) | 102 | 72 | 53 | 133 | 140 | 171 |
7. Ionisation Enthalpy
- Ionisation enthalpy (ΔiH) is the energy required to remove an electron from an isolated gaseous atom in its ground state: X(g) → X+(g) + e-. Successive enthalpies increase (ΔiH1 < ΔiH2 < ΔiH3) because each electron is removed from a more positive ion. A sudden large jump in successive values marks the change from valence electrons to core electrons (e.g. Na: ΔiH1 = 496 but ΔiH2 = 4562 kJ mol-1, because the second electron comes from the stable neon core).
- Across a period it generally increases (Zeff rises, size falls). Down a group it decreases (size rises, the outer electron is farther and better shielded). Alkali metals have the lowest and noble gases the highest values in each period.
- Exceptions (must know):
- Be > B: Be (1s2 2s2) has a completely filled 2s subshell, and its electron is removed from the more penetrating 2s orbital; B loses a less tightly held 2p electron, so ΔiH of B is lower. Hence the second-period order is Li < B < Be < C < O < N < F < Ne (not the naive order).
- N > O: N (2p3) has a stable half-filled p subshell; in O (2p4) one p orbital holds a paired electron whose repulsion makes it easier to remove — removing it also leaves O+ with a half-filled 2p3 configuration. So ΔiH of O is lower than that of N (and lower than F).
- Mg > Al and P > S: the same two causes repeat in period 3 (filled 3s2 of Mg vs 3p1 of Al; half-filled 3p3 of P vs 3p4 of S). For Li, Be, B, C, N the increasing order is Li < B < Be < C < N.
- Noble gases have very high ionisation enthalpies because of their stable complete octet.
8. Electron Gain Enthalpy
- Electron gain enthalpy (ΔegH) is the enthalpy change when an electron is added to an isolated gaseous atom: X(g) + e- → X-(g). It is generally negative (energy released) for halogens and most non-metals, and becomes more negative across a period; down a group it generally becomes less negative.
- Exception — Cl > F: the electron gain enthalpy of chlorine (−349 kJ mol-1) is more negative than that of fluorine (−333 kJ mol-1), although F is above Cl. The small F atom has a compact 2p subshell in which the incoming electron faces strong electron–electron repulsion; in the larger Cl (3p) this repulsion is less. Among halogens the order of electron gain enthalpy (most negative first) is Cl > F > Br > I.
- Positive values: noble gases have large positive electron gain enthalpies (the added electron must enter the next shell, against a stable octet), and nitrogen and the alkaline-earth metals (Be, Mg) also have positive or near-zero values because of their stable half-filled/filled subshells. Noble gases are therefore unreactive: very high ionisation enthalpy and positive electron gain enthalpy.
9. Electronegativity
- Electronegativity is the tendency of an atom in a molecule to attract the shared electron pair towards itself. On the Pauling scale, fluorine is the most electronegative element (4.0), followed by O (3.5), N and Cl (3.0). Electronegativity is a property of a bonded atom (unlike ionisation and electron gain enthalpies, which belong to isolated atoms), and it has no unit.
- Across a period it increases (Si < C < N < O < F for the set Si, C, N, O, F); down a group it decreases. Noble gases are generally not assigned values. Electronegativity difference decides bond type: large difference → ionic character; small difference → covalent character.
10. Valency and Oxidation States
- Valency across a period (with respect to oxygen) first increases from 1 to 7 and then decreases: period 3 oxides — Na2O (1), MgO (2), Al2O3 (3), SiO2 (4), P2O5 (5), SO3 (6), Cl2O7 (7). With respect to hydrogen, valency rises 1 to 4 and then falls back to 1 (NaH, MgH2, AlH3, SiH4, PH3, H2S, HCl).
- Down a group, valency usually stays the same because the valence configuration is the same.
- Oxidation state: the maximum positive oxidation state an element can show often equals its group number (e.g. group 16 up to +6, group 17 up to +7 — shown by Cl, Br, I but not F, which shows only −1 because it has no d-orbitals and is the most electronegative). Oxygen shows −2 in most compounds (exceptions: −1 in peroxides, +2 in OF2). Transition metals show variable oxidation states because (n−1)d and ns electrons are close in energy.
11. Chemical Reactivity, Diagonal Relationship and Anomalous Behaviour
- Reactivity trends: metallic (electropositive) character decreases across a period and increases down a group; non-metallic character shows the opposite trend. The most reactive metal (Cs/Fr) sits at the bottom-left and the most reactive non-metal (F) at the top-right. Group 1 metals react increasingly violently with water down the group, matching their falling ionisation enthalpies.
- Diagonal relationship: some elements of period 2 resemble the element diagonally below-right in period 3 — Li resembles Mg, Be resembles Al, B resembles Si — because the increase in size down the group is roughly balanced by the increase in charge across the period, giving similar charge density (polarising power).
- Anomalous properties of second-period elements: Li, Be, B, C, N, O and F differ from the heavier members of their groups because of (i) very small size, (ii) high electronegativity and ionisation enthalpy, (iii) absence of d-orbitals, so the maximum covalence is 4 (e.g. BF4- exists but no BF6 3-; carbon forms no CCl6 2-), and (iv) ability to form pπ–pπ multiple bonds (C=C, C≡C, C=O, N≡N), which heavier elements form only weakly (they prefer pπ–dπ or single bonds). Example: CO2 is a gas of discrete molecules, while SiO2 is a giant covalent solid.
12. Periodic Trends in Properties of Compounds (in brief)
- Oxides: across a period, oxides change from basic → amphoteric → acidic (Na2O, MgO basic; Al2O3, SiO2 amphoteric/weakly acidic; P2O5, SO3, Cl2O7 acidic). Down a group, acidic character of oxides of the same element decreases. A standard match: CO is neutral, BaO is basic, Al2O3 is amphoteric and Cl2O7 is acidic.
- Hydrides: across a period, hydrides become more acidic (CH4 neutral, NH3 basic, H2O neutral, HF acidic); thermal stability of group hydrides decreases down a group.
- Halides and melting points follow size and polarisation (Fajans-type) trends: as cation size falls or anion size rises, covalent character increases and ionic melting points fall.
13. Important Facts — One-Liners (for last-minute revision)
1. Dobereiner: triads — atomic mass of the middle element ≈ average of the other two.
2. Newlands: law of octaves, valid only up to Ca.
3. Mendeleev: periodic law based on atomic mass; predicted eka-aluminium (Ga) and eka-silicon (Ge).
4. Modern periodic law (Moseley): properties are a periodic function of atomic number.
5. Table: 7 periods, 18 groups; period 6 is the longest complete period (32 elements).
6. Blocks: s = groups 1–2, p = 13–18, d = 3–12, f = lanthanoids + actinoids.
7. Z > 100 names: digit roots nil, un, bi, tri, quad, pent, hex, sept, oct, enn + -ium; 111 Unununnium = Roentgenium, 110 Ununnilium = Darmstadtium.
8. Zeff = Z − S; Zeff increases across a period and drives almost every period trend.
9. Atomic radius decreases across a period, increases down a group; van der Waals radius is the largest type of radius.
10. Radii order: Li > Be > B > C (period 2); atomic radius of Cs is greater than that of Li and Rb.
11. Zr and Hf have nearly equal radii because of lanthanoid contraction.
12. Cation < parent atom < anion in size; Fe3+ < Fe2+ < Fe.
13. Isoelectronic (10 e-): N3- > O2- > F- > Na+ > Mg2+ > Al3+ — radius falls as Z rises.
14. Isoelectronic (18 e-): Ca2+, Ar, K+, Cl-, S2- — all have 18 electrons.
15. Ionisation enthalpy increases across a period and decreases down a group; noble gases highest, alkali metals lowest.
16. IE exceptions: Be > B (filled 2s, penetration), N > O (half-filled 2p3), Mg > Al, P > S.
17. Second-period IE order: Li < B < Be < C < O < N < F < Ne.
18. Na ΔiH2 is huge (4562 vs 496 kJ mol-1) — the second electron leaves the stable Ne core.
19. Electron gain enthalpy: Cl > F (more negative for Cl) — F's compact 2p shell repels the incoming electron.
20. Noble gases have large positive electron gain enthalpies — one reason they are inert; N, Be, Mg are also positive/near-zero.
21. Electronegativity (Pauling): F 4.0 is maximum; order Si < C < N < O < F; it increases across a period and decreases down a group.
22. Valency (vs oxygen) across period 3 rises 1 → 7 (Na2O to Cl2O7); F shows only −1 oxidation state.
23. Diagonal relationship: Li–Mg, Be–Al, B–Si (similar charge density).
24. Second-period anomaly: no d-orbitals, so maximum covalence 4; strong pπ–pπ multiple bonds (CO2 gas vs SiO2 giant solid).
14. Common Mistakes — Watch Out
1. IE order of period 2 is NOT Li < Be < B < C < N < O < F < Ne — the correct order is Li < B < Be < C < O < N < F < Ne (Be > B and N > O).
2. Electron gain enthalpy of F is NOT the most negative — Cl is more negative than F; do not confuse electronegativity (F highest) with electron gain enthalpy (Cl highest among halogens).
3. Electronegativity ≠ electron gain enthalpy: the first is for a bonded atom and is unitless (Pauling scale); the second is for an isolated gaseous atom in kJ mol-1.
4. Anions are LARGER and cations SMALLER than the parent atom — never the reverse.
5. In an isoelectronic series, the species with the highest Z is the SMALLEST (Al3+ < Mg2+ < Na+), not the largest.
6. Noble gases do NOT have very high melting/boiling points — they have very low ones (weak dispersion forces); their high values are ionisation enthalpy and (positive) electron gain enthalpy.
7. Unununnium (111) is Roentgenium, not Darmstadtium — Darmstadtium is element 110 (Ununnilium).
8. Zr/Hf similarity is due to lanthanoid contraction, not the diagonal relationship and not merely "same group".
9. Successive ionisation enthalpies always increase — and the big jump comes when a core electron is removed, not at the second electron automatically (compare Na with Mg).
10. Fluorine shows only −1 — the +1, +3, +5, +7 states of group 17 belong to Cl, Br and I (they have d-orbitals available in the valence shell region).
11. Atomic radius decreases across a period even though electrons are being added — they enter the same shell while Zeff rises.
12. Mendeleev's law used atomic MASS; the modern law uses atomic NUMBER — crediting Mendeleev with the atomic-number law is a common slip.
Next step: after these notes, take the 30-question Objective Quiz of this chapter — including previous years' questions, with an explanation for every question.

