🎓 RAS • RPSC • NEET • SSC • RRB • Teaching परीक्षाओं की तैयारी
मुफ़्त Notes, Daily Current Affairs और Online Mock Tests — सब कुछ एक ही जगह
🩺 NEET (UG) Hub — Notes, Quiz और Mock Tests
Class 11-12 Chapter-wise Notes (Hindi + English), 30-Question Quiz और PYQ Mock Tests — बिल्कुल मुफ़्त
🌿 Biology 🧪 Chemistry ⚛ Physics 📝 NEET Mock Tests — Free

NEET Chemistry Notes: Some Basic Concepts of Chemistry — Complete Notes

 


Some Basic Concepts of Chemistry — Complete Notes

Subject: Chemistry • Class: 11 • Unit: Physical Chemistry (Basic Concepts)

Place in the exam pattern: This is the numerical foundation chapter of Physical Chemistry — mole concept, empirical formula, stoichiometry, limiting reagent and concentration terms are asked almost every year, and the same skills are used again in solutions, equilibrium and electrochemistry questions.

Chemistry is the study of matter — its composition, properties and the changes it undergoes. Almost every calculation in Class 11–12 Chemistry begins with the ideas of this chapter: how much substance we have (the mole), how its formula is found from its composition, and how much product a reaction can give.

1. Properties of Matter and Its Measurement

Matter is anything that has mass and occupies space. It exists in three physical states — solid (definite volume and definite shape), liquid (definite volume, no definite shape) and gas (no definite volume, no definite shape). Chemically, matter is classified as elements (only one kind of atoms, e.g. copper, oxygen), compounds (two or more elements combined in a fixed ratio, e.g. water, carbon dioxide) and mixtures (two or more substances mixed without a fixed ratio, e.g. air, brass).

Every measurement of a physical quantity has two parts — a number and a unit. The internationally accepted system of units is the SI system.

Physical quantitySI unitSymbol
Lengthmetrem
Masskilogramkg
Timeseconds
TemperaturekelvinK
Amount of substancemolemol
Electric currentampereA
Luminous intensitycandelacd

Useful derived/related units: volume is measured in litre (L); 1 L = 1000 mL = 1000 cm3 = 1 dm3. Density = mass / volume (SI unit kg m-3, commonly g cm-3). Temperature conversions: K = degree C + 273.15 (in most numericals, +273 is used).

Scientific notation and significant figures

  • Very large or small numbers are written as N x 10^n (e.g. Avogadro number = 6.022 x 10^23). In this notation all digits of N are significant.
  • Significant figures are the digits of a measured number that are known reliably plus one uncertain digit. Rules: all non-zero digits are significant; zeros between non-zero digits are significant; leading zeros (before the first non-zero digit) are NOT significant; trailing zeros in a number with a decimal point ARE significant.
  • Examples: 0.0025 has 2 significant figures; 2.50 has 3; 0.002050 has 4 (2, 0, 5 and the last 0); 5005 has 4.
  • Addition/subtraction: the result is reported to the same number of decimal places as the measurement with the fewest decimal places. Example: 9.99 m - 0.0099 m = 9.9801 m, reported as 9.98 m (9.99 has only two decimal places).
  • Multiplication/division: the result keeps the same number of significant figures as the measurement with the fewest significant figures. Example: 2.5 x 1.25 = 3.125, reported as 3.1 (2 significant figures).
  • Rounding off: if the digit to be dropped is more than 5, raise the previous digit by 1; if less than 5, leave it unchanged; if exactly 5, raise the previous digit only if it is odd (so that the retained digit becomes even).

Dimensional analysis (in brief)

Dimensional analysis converts one unit into another using a conversion factor — a ratio equal to 1. Example: convert 5 inches into cm. 1 inch = 2.54 cm, so 5 inch x (2.54 cm / 1 inch) = 12.7 cm. Units cancel like numbers; always write the factor so that the unwanted unit cancels.

2. Laws of Chemical Combination

These laws were established by careful experimental work on chemical reactions.

LawGiven byStatementClassic example
Law of conservation of massLavoisier (1789)Matter can neither be created nor destroyed in a chemical reaction; total mass of reactants = total mass of products10 g CaCO3 on heating gives 4.4 g CO2 + 5.6 g CaO; total stays 10 g
Law of definite proportions (constant composition)Proust (1799)A chemical compound always contains the same elements combined in the same proportion by mass, whatever its sourceWater from any source always has H : O = 1 : 8 by mass
Law of multiple proportionsDalton (1803)When two elements combine to form more than one compound, the masses of one element that combine with a fixed mass of the other are in a simple whole-number ratioCO and CO2: for a fixed 12 g of carbon, oxygen masses are 16 g and 32 g, i.e. ratio 1 : 2
Gay-Lussac's law of gaseous volumesGay-Lussac (1808)When gases react, they do so in volumes which bear a simple whole-number ratio to one another and to the volumes of the gaseous products (all volumes measured at the same temperature and pressure)H2 (g) + Cl2 (g) -> 2HCl (g): volumes are in the ratio 1 : 1 : 2
Avogadro's lawAvogadro (1811)Equal volumes of all gases, at the same temperature and pressure, contain an equal number of molecules1 L of H2 and 1 L of O2 (same T, P) contain the same number of molecules

Worked check — multiple proportions: Nitrogen forms N2O, NO and N2O5. For a fixed mass of nitrogen (28 g), the oxygen masses combining are 16 g, 32 g and 80 g respectively — ratio 16 : 32 : 80 = 1 : 2 : 5, a simple whole-number ratio. This confirms the law of multiple proportions.

3. Dalton's Atomic Theory

Dalton (1808) proposed the first scientific atomic theory. Its main postulates are:

1. All matter is made of tiny indivisible particles called atoms.

2. Atoms of a given element are identical in mass and chemical properties; atoms of different elements have different masses and properties.

3. Atoms combine in the ratio of small whole numbers to form compounds.

4. Atoms can neither be created nor destroyed in a chemical reaction; a reaction is only a rearrangement of atoms.

The theory explained the laws of conservation of mass, definite proportions and multiple proportions. Its limitations (known later): atoms are NOT indivisible (they contain electrons, protons and neutrons); atoms of the same element can have different masses (isotopes), and atoms of different elements can have the same mass (isobars). Dalton's theory could not explain Gay-Lussac's law of gaseous volumes — that needed Avogadro's idea of molecules.

4. Atomic and Molecular Mass

  • Atomic mass unit (amu, now called u): 1 u = 1/12th of the mass of one atom of carbon-12. 1 u = 1.66056 x 10^-24 g.
  • Atomic mass of an element is the average mass of its atoms compared with 1/12th of the mass of a C-12 atom. Because most elements have isotopes, we use the average atomic mass.
  • Average atomic mass = sum over isotopes of (fractional abundance x mass of isotope).
  • Worked example: Chlorine has two isotopes — Cl-35 (75% abundance) and Cl-37 (25% abundance). Average atomic mass = (35 x 0.75) + (37 x 0.25) = 26.25 + 9.25 = 35.5 u.
  • Worked example: Boron has B-10 (20%) and B-11 (80%). Average = (10 x 0.20) + (11 x 0.80) = 2.0 + 8.8 = 10.8 u.
  • Molecular mass is the sum of the atomic masses of all atoms in one molecule. Example: H2SO4 = (2 x 1) + 32 + (4 x 16) = 2 + 32 + 64 = 98 u. Glucose C6H12O6 = (6 x 12) + (12 x 1) + (6 x 16) = 72 + 12 + 96 = 180 u. For ionic compounds (like NaCl) the term formula mass is used instead: NaCl = 23 + 35.5 = 58.5 u.

5. Mole Concept and Molar Mass

Atoms and molecules are far too small to count one by one, so chemists count them in a standard packet — the mole.

  • 1 mole = 6.022 x 10^23 particles (atoms, molecules, ions, electrons...). This number is the Avogadro constant (NA).
  • Molar mass is the mass of 1 mole of a substance, in g mol-1. It is numerically equal to the atomic/molecular mass in u. Examples: molar mass of H2O = 18 g mol-1; of CO2 = 44 g mol-1; of Na = 23 g mol-1.
  • Master relation: number of moles (n) = mass in grams (W) / molar mass (M), and number of particles = n x NA.

Worked examples:

  • Moles in 36 g of water: n = 36 / 18 = 2 mol. Molecules = 2 x 6.022 x 10^23 = 1.2044 x 10^24 molecules. (Atoms = 3 x that, because each H2O has 3 atoms: 3.613 x 10^24 atoms.)
  • Mass of 0.5 mol of CO2: W = 0.5 x 44 = 22 g.
  • Atoms in 12 g of carbon: n = 12 / 12 = 1 mol, so atoms = 6.022 x 10^23.
  • Which has more atoms — 1 g of Li (atomic mass 7), 1 g of Mg (24), 1 g of Ag (108), 1 g of O2 (16)? Moles of atoms: Li = 1/7 = 0.143; Mg = 1/24 = 0.042; Ag = 1/108 = 0.0093; O2 = (1/32) x 2 = 0.0625 mol of atoms. Lithium (1 g) has the maximum number of atoms — the lighter the atom, the more atoms in 1 g.
  • 1.0 g of H2 contains 1/2 = 0.5 mol of molecules. The same number of molecules is present in 14 g of N2 (14/28 = 0.5 mol).
  • At STP, 1 mol of any gas occupies 22.4 L (molar volume). Example: 4.5 kg of water = 4500/18 = 250 mol; if it behaved as a gas at STP with no intermolecular forces, its volume = 250 x 22.4 L = 5600 L = 5.6 m3.

6. Percentage Composition

The percentage composition of a compound gives the mass percentage of each element in it.

Mass % of an element = (mass of the element in 1 mol of the compound / molar mass of the compound) x 100

Worked examples:

  • Water (H2O, 18 g mol-1): % H = (2/18) x 100 = 11.11%; % O = (16/18) x 100 = 88.89%.
  • Sulphuric acid (H2SO4, 98 g mol-1): % O = (64/98) x 100 = 65.31%; % S = (32/98) x 100 = 32.65%; % H = (2/98) x 100 = 2.04%.
  • From combustion data: 0.3 g of an organic compound on complete combustion gave 0.2 g CO2 and 0.1 g H2O. Mass of C = 0.2 x (12/44) = 0.0545 g, so % C = (0.0545/0.3) x 100 = 18.18%. Mass of H = 0.1 x (2/18) = 0.0111 g, so % H = (0.0111/0.3) x 100 = 3.70%.

7. Empirical and Molecular Formula

  • The empirical formula shows the simplest whole-number ratio of atoms of each element in the compound (e.g. glucose: CH2O).
  • The molecular formula shows the exact number of atoms of each element in one molecule (e.g. glucose: C6H12O6).
  • Molecular formula = (empirical formula) x n, where n = molar mass / empirical formula mass.

Steps: (1) Convert each % into mass (take 100 g of compound). (2) Divide each mass by the atomic mass to get moles. (3) Divide all mole values by the smallest value to get the simplest ratio. (4) If any value is fractional (like 1.5 or 2.5), multiply all by a small integer to make whole numbers. (5) Write the empirical formula; use n to get the molecular formula if the molar mass is given.

Worked example 1: A compound contains C = 40%, H = 6.67%, O = 53.33%. Moles: C = 40/12 = 3.33; H = 6.67/1 = 6.67; O = 53.33/16 = 3.33. Ratio = 3.33 : 6.67 : 3.33 = 1 : 2 : 1, so the empirical formula is CH2O. If the molar mass is 180 g mol-1, n = 180/30 = 6, so the molecular formula is C6H12O6 (glucose).

Worked example 2: A compound contains 78% carbon and 22% hydrogen (by mass). Moles: C = 78/12 = 6.5; H = 22/1 = 22. Ratio = 6.5 : 22 = 1 : 3.38, approximately 1 : 3, so the empirical formula is CH3.

Worked example 3: Compound X contains 32% of A (atomic mass 64), 20% of B (40) and 48% of C (32). Moles: A = 32/64 = 0.5; B = 20/40 = 0.5; C = 48/32 = 1.5. Ratio = 0.5 : 0.5 : 1.5 = 1 : 1 : 3, so the empirical formula is ABC3.

8. Stoichiometry and Stoichiometric Calculations

Stoichiometry deals with the quantitative relationships between reactants and products in a balanced chemical equation. The coefficients of a balanced equation give the mole ratios in which substances react and are formed.

For N2 (g) + 3H2 (g) -> 2NH3 (g): 1 mol of N2 reacts with 3 mol of H2 to give 2 mol of NH3. In mass terms: 28 g N2 + 6 g H2 -> 34 g NH3.

Worked examples:

  • How many moles of H2 are needed to produce 20 mol of NH3? From the equation, 2 mol NH3 need 3 mol H2, so 20 mol NH3 need (3/2) x 20 = 30 mol of H2.
  • Mass of CO2 from limestone: CaCO3 -> CaO + CO2. 20 g of limestone that is only 20% pure contains 20 x 0.20 = 4 g of pure CaCO3 = 4/100 = 0.04 mol. CO2 formed = 0.04 mol x 44 g mol-1 = 1.76 g.
  • Complete combustion of n-butane: C4H10 + (13/2) O2 -> 4CO2 + 5H2O. 116 g of butane = 116/58 = 2 mol. CO2 formed = 2 x 4 = 8 mol = 8 x 44 = 352 g.
  • Mass of methane: the product of heating sodium ethanoate with soda lime (NaOH + CaO) is methane, CH4 (molar mass 16 g mol-1). Two moles weigh 2 x 16 = 32 g.

Standard method for every stoichiometric numerical: (1) write the balanced equation; (2) convert the given quantity into moles; (3) use the mole ratio from the equation; (4) convert the answer moles into mass, volume or particles as asked.

9. Limiting Reagent

When reactants are not mixed in the exact ratio of the balanced equation, the reactant that is consumed first — and so limits the amount of product — is the limiting reagent. The other reactant is left over in excess.

How to find it: divide the moles of each reactant by its coefficient in the balanced equation; the smallest value belongs to the limiting reagent. All product calculations are then based on the limiting reagent only.

Worked example: 14 g of N2 (0.5 mol) is reacted with 6 g of H2 (3 mol): N2 + 3H2 -> 2NH3. Check: N2 gives 0.5/1 = 0.5; H2 gives 3/3 = 1.0. The smaller value is for N2, so N2 is the limiting reagent. H2 actually needed = 3 x 0.5 = 1.5 mol (3 g); the remaining 1.5 mol of H2 (3 g) is left unreacted. NH3 formed = 2 x 0.5 = 1.0 mol = 17 g.

10. Reactions in Solution — Concentration Terms (in brief)

Many reactions are carried out in solution, so the amount of solute per amount of solution/solvent must be expressed exactly.

TermDefinitionFormula (plain text)Depends on temperature?
Mass percentage (w/w)Mass of solute per 100 g of solutionmass % = (mass of solute / mass of solution) x 100No
Mole fraction (x)Moles of one component / total moles of all componentsxA = nA / (nA + nB); note xA + xB = 1No
Molarity (M)Moles of solute per litre of solutionM = moles of solute / volume of solution in litresYes (volume changes with T)
Molality (m)Moles of solute per kilogram of solventm = moles of solute / mass of solvent in kgNo

Worked examples:

  • Molarity: 0.5 mol of NaOH dissolved to make 500 mL of solution: M = 0.5 / 0.5 L = 1.0 M. To prepare 250 mL of M/20 (0.05 M) glucose solution: moles needed = 0.05 x 0.25 = 0.0125 mol; mass = 0.0125 x 180 = 2.25 g of glucose.
  • Molality: a solution containing 0.5 mol of solute is one molal (1 m) only when the solvent is 500 g — because 0.5 mol per 0.5 kg = 1 mol per kg. In general, 1 molal = 1 mol of solute in 1000 g of solvent (not 1000 g of solution).
  • Molarity to molality: a 1 M solution of compound X (molar mass 85 g mol-1) has density 1.25 g mL-1. Take 1 L of solution: it contains 1 mol of X = 85 g; mass of solution = 1000 mL x 1.25 = 1250 g; mass of solvent = 1250 - 85 = 1165 g = 1.165 kg. Molality = 1 / 1.165 = 0.858 m.
  • Mole fraction: 4 mol of urea mixed with 16 mol of water: x(urea) = 4 / (4 + 16) = 0.20, and x(water) = 0.80; the two add up to 1.

11. Important Facts — One-Liners (for last-minute revision)

1. Law of conservation of mass — Lavoisier; total mass of reactants = total mass of products.

2. Law of definite proportions — Proust; a compound always has the same elements in the same mass ratio (water: H : O = 1 : 8 by mass).

3. Law of multiple proportions — Dalton; CO vs CO2 oxygen masses for fixed carbon are in the ratio 1 : 2.

4. Gay-Lussac's law — reacting gases combine in simple volume ratios at the same T and P; Dalton's theory could NOT explain it.

5. Avogadro's law — equal volumes of all gases at the same T and P contain equal numbers of molecules.

6. 1 u = 1/12th the mass of one C-12 atom = 1.66056 x 10^-24 g.

7. Avogadro constant NA = 6.022 x 10^23 mol-1; 1 mole of anything contains this many particles.

8. n = W / M (moles = mass in grams / molar mass); particles = n x NA.

9. Average atomic mass of chlorine = 35.5 u (Cl-35 75% + Cl-37 25%); of boron = 10.8 u.

10. Molar mass is numerically equal to the atomic/molecular mass in u, with unit g mol-1.

11. 1 g of lithium has more atoms than 1 g of Mg, Ag or O2 — smallest molar mass wins.

12. 1 g of H2 = 0.5 mol of molecules = the molecules in 14 g of N2.

13. At STP, 1 mol of gas occupies 22.4 L; 250 mol (4.5 kg water as gas) would occupy 5.6 m3.

14. Mass % of oxygen in H2SO4 = 65.31%; in water, % H = 11.11% and % O = 88.89%.

15. Empirical formula of glucose is CH2O; molecular formula = empirical formula x n, n = molar mass / empirical mass.

16. A compound with 78% C and 22% H has the empirical formula CH3.

17. Haber process: 30 mol of H2 are needed to make 20 mol of NH3 (ratio 3 : 2).

18. 20 g of 20% pure limestone gives only 1.76 g of CO2 — purity is applied BEFORE the mole calculation.

19. Complete combustion of 116 g of n-butane gives 352 g of CO2.

20. Limiting reagent = the reactant with the smallest value of (moles / coefficient); product is calculated from it alone.

21. Molarity uses litres of SOLUTION; molality uses kilograms of SOLVENT — molality does not change with temperature, molarity does.

22. A one-molal solution with 0.5 mol of solute contains 500 g of solvent.

23. Mole fractions of all components always add up to 1.

24. In addition/subtraction keep decimal places (9.99 - 0.0099 = 9.98); in multiplication/division keep significant figures.

25. Dalton's theory failed for isotopes (same element, different masses) and could not explain gaseous volumes.

26. In 0.002050 there are 4 significant figures; leading zeros are never significant, trailing zeros after a decimal point are.

12. Common Mistakes — Watch Out

1. Confusing mass of solution with mass of solvent in molality. Molality divides by kg of SOLVENT only — subtract the solute mass from the solution mass first (the 1 M X example: solvent = 1165 g, not 1250 g).

2. Using 1000 g of solution for a 1 molal solution. 1 molal means 1 mol of solute in 1000 g of solvent; with 0.5 mol of solute the solvent is 500 g, not 500 mL and not 1000 g.

3. Forgetting purity or percentage before converting to moles. In the limestone question only 20% of 20 g (4 g) is CaCO3 — using 20 g directly gives a five-times-too-large answer.

4. Counting molecules instead of atoms (or the reverse). 1 g of O2 means (1/32) mol of MOLECULES but (1/16) mol of ATOMS; read the question word carefully.

5. Taking the reactant present in the smaller amount as automatically limiting. The limiting reagent is found by (moles / coefficient), not by mass or by moles alone.

6. Reporting 9.9801 m for 9.99 m - 0.0099 m. Subtraction follows decimal places, not total significant figures — the correct reported value is 9.98 m.

7. Counting leading zeros as significant. 0.0025 has 2 significant figures, not 4; but the trailing zero in 0.002050 IS significant (4 significant figures).

8. Using the empirical formula mass as the molar mass. Glucose's empirical mass is 30, but its molar mass is 180, so n = 6 and the molecular formula is C6H12O6, not CH2O.

9. Skipping the "divide by the smallest" step in empirical-formula questions, or stopping at a fractional ratio like 1 : 1.5 instead of multiplying through to whole numbers (ABC3 comes from 0.5 : 0.5 : 1.5).

10. Mixing up the laws: definite proportions = ONE compound, same ratio from any source; multiple proportions = TWO compounds of the same two elements, simple ratio between them.

11. Attributing Gay-Lussac's law to Dalton's theory. Dalton explained conservation, definite and multiple proportions, but NOT gaseous volumes — that is the standard "could not explain" answer.

12. Treating equal masses as equal moles. 1 g each of H2, N2 and CO do not have equal molecules; equal MOLES (or equal masses divided by their own molar masses) must be compared.

13. Forgetting that mole fractions sum to 1 — a quick check: if x(solute) = 0.2, x(solvent) must be 0.8; any other pair signals an error.

14. Using 22.4 L for a liquid or solid. The molar volume 22.4 L at STP applies to gases only; for water the 5.6 m3 answer holds only under the question's condition that intermolecular forces vanish (i.e. it behaves as a gas).

Next step: after these notes, take the 30-question Objective Quiz of this chapter — including previous years' questions, with an explanation for every question.

एक टिप्पणी भेजें (0)
और नया पुराने