🎓 RAS • RPSC • NEET • SSC • RRB • Teaching परीक्षाओं की तैयारी
मुफ़्त Notes, Daily Current Affairs और Online Mock Tests — सब कुछ एक ही जगह
🩺 NEET (UG) Hub — Notes, Quiz और Mock Tests
Class 11-12 Chapter-wise Notes (Hindi + English), 30-Question Quiz और PYQ Mock Tests — बिल्कुल मुफ़्त
🌿 Biology 🧪 Chemistry ⚛ Physics 📝 NEET Mock Tests — Free

NEET Physics Notes: Dual Nature of Radiation and Matter — Complete Notes


 

Dual Nature of Radiation and Matter — Complete Notes

Subject: Physics • Class: 12 • Chapter: Dual Nature of Radiation and Matter

Place in the exam pattern: Questions come from this chapter almost every year — photon energy (E = hc/lambda), the Einstein photoelectric equation, threshold wavelength and stopping potential, and the de Broglie wavelength of an electron accelerated through a potential difference are the most frequently asked parts. Most questions are short numericals, so the three working formulas — E = 1240/lambda (in nm) eV, Kmax = h nu - phi0 and lambda = 12.27/sqrt(V) angstrom — must be memorised exactly.

Light behaves as a wave in interference, diffraction and polarisation, and as a stream of particles (photons) in the photoelectric effect. Moving matter particles also behave as waves. This dual behaviour — of radiation and of matter — is the subject of this chapter.

1. Electron Emission

  • A metal has free electrons that move inside it but cannot leave the surface at ordinary temperatures, because the surface acts as a barrier. The minimum energy an electron needs to escape from the metal surface is the work function, denoted by phi0. It depends only on the material and the condition of its surface.
  • Unit of work function: the electron volt (eV). 1 eV = 1.602 x 10^-19 J (written here as about 1.6 x 10^-19 J).
  • Energy can be given to the electrons in different ways; each way gives a type of electron emission:
Type of emissionHow energy is suppliedPractical example
Thermionic emissionThe metal is heated; thermal energy frees some electronsCathode of a vacuum tube / electron gun
Field emissionA very strong electric field pulls electrons out of the metalSharp-point (cold cathode) devices
Photoelectric emissionLight of suitable frequency falls on the surface; its energy frees electronsPhotoelectric cells, light sensors
Secondary emissionFast-moving particles strike the surface and knock electrons outPhotomultiplier tubes
  • Smaller work function means easier emission. Alkali metals like caesium have low work functions, which is why they are used in photoelectric cells.
MetalWork function phi0 (eV)
Caesium (Cs)2.14
Potassium (K)2.30
Sodium (Na)2.75
Calcium (Ca)3.20
Molybdenum (Mo)4.17
Zinc (Zn)4.30
Copper (Cu)4.65
Nickel (Ni)5.15
Platinum (Pt)5.65

2. Photoelectric Effect — Hertz, Hallwachs and Lenard

  • Hertz (1887): while doing experiments on electromagnetic waves, Hertz observed that ultraviolet light falling on the metal electrodes of a spark gap made the spark jump more easily. This was the first observation of the effect.
  • Hallwachs: a negatively charged zinc plate connected to an electroscope lost its charge when ultraviolet light fell on it; a positively charged plate did not. So the emitted carriers of charge are negative — electrons.
  • Lenard: ultraviolet light falling on the cathode of an evacuated tube produces a current between the cathode and anode (the photoelectric current). He also studied how this current changes with intensity, frequency and potential (Section 3).
  • Photoelectric effect: the emission of electrons from a metal surface when radiation of suitable frequency is incident on it. The emitted electrons are called photoelectrons.

3. Experimental Study of the Photoelectric Effect

Apparatus (in words): in an evacuated glass tube, a photosensitive plate C (cathode) and a metal plate A (anode) face each other. Light of known frequency and intensity enters through a quartz window and falls on C. The potential of A with respect to C can be made positive or negative and varied; the photocurrent is measured by a microammeter.

Effect of intensity

  • At a fixed frequency (above threshold) and fixed anode potential, the photoelectric current increases linearly with the intensity of the incident light — more photons per second means more electrons emitted per second.
  • The saturation current (all emitted electrons collected) is proportional to intensity.

Effect of potential

  • As the anode potential increases, the photocurrent increases and then becomes constant (saturation).
  • When the anode is made negative (retarding potential), the current decreases. At a particular negative potential V0, the current becomes exactly zero. V0 is the stopping potential (or cut-off potential).
  • At the stopping potential, even the fastest photoelectron is stopped: Kmax = e V0, where Kmax is the maximum kinetic energy of the photoelectrons.
  • For a given frequency, the stopping potential is the same for different intensities — increasing intensity increases the current but NOT the stopping potential.

Effect of frequency

  • For a given photosensitive material, there is a minimum frequency nu0, the threshold frequency (also called cut-off frequency), below which no emission takes place, whatever the intensity and however long the light falls.
  • Above nu0, the stopping potential (and Kmax) increases linearly with frequency: the V0-versus-nu graph is a straight line.
  • Emission starts instantly (within about 10^-9 s) when light of frequency above nu0 falls on the surface — there is no time lag.

Laws of photoelectric emission (summary)

1. For a given material and frequency above threshold, the photocurrent is directly proportional to the intensity of incident radiation.

2. For a given material, emission takes place only if the frequency is above the threshold frequency nu0 (equivalently, the wavelength is below the threshold wavelength lambda0 = c/nu0).

3. Above threshold, the maximum kinetic energy of the photoelectrons increases linearly with frequency and is independent of intensity.

4. The process is instantaneous — emission begins as soon as the light falls, with no detectable time delay.

  • The wave theory of light could NOT explain points 2, 3 and 4: in wave theory, energy depends on intensity, so a bright light of any frequency should eventually eject electrons, with a time lag at low intensity. None of this is observed.

4. Einstein's Photoelectric Equation and the Particle Nature of Light



  • Photon picture (Einstein, 1905): light of frequency nu consists of packets of energy called photons (quanta). Each photon has energy E = h nu = hc/lambda, where h is Planck's constant (h = 6.6 x 10^-34 J s, more precisely 6.626 x 10^-34 J s).
  • In photoemission, one photon gives its entire energy to one electron. Part of the energy (phi0) is spent in freeing the electron from the surface; the rest appears as the electron's kinetic energy. The fastest electrons are those that lose nothing extra inside the metal:

Kmax = h nu - phi0 — Einstein's photoelectric equation

  • Since Kmax = e V0, also e V0 = h nu - phi0, or V0 = (h/e) nu - phi0/e. The slope of the V0-versus-nu graph is h/e, the same for all materials; the intercept gives phi0.
  • At the threshold frequency, Kmax = 0, so phi0 = h nu0, and the threshold wavelength is lambda0 = hc/phi0.
  • Useful shortcut: E (in eV) = 1240 / lambda (in nm). Example: lambda = 400 nm gives E = 3.1 eV.
  • This one equation explains every law of Section 3: intensity = number of photons (current proportional to intensity); frequency fixes each photon's energy (threshold and Kmax linear in nu); one photon–one electron transfer is instantaneous.

Photon properties

PropertyValue / relation
EnergyE = h nu = hc/lambda
Momentump = E/c = h nu/c = h/lambda
Speed (in vacuum)c, for photons of all frequencies
Rest massZero
ChargeZero (electrically neutral)
Behaviour in collisionsTotal energy and total momentum are conserved
Number of photons per second from a source of power PN = P / E = P lambda / (hc)
  • Intensity of radiation (energy per unit area per second) can also be written as (number of photons per unit area per second) x (energy of one photon). Increasing intensity at fixed frequency means more photons, not more energy per photon.

5. Wave Nature of Matter — the de Broglie Relation

  • de Broglie hypothesis (1924): if radiation has a dual (wave–particle) nature, then moving matter particles should also show wave behaviour. A particle of momentum p has an associated wavelength:

lambda = h / p = h / (m v) — de Broglie wavelength

  • For a particle of mass m with kinetic energy K, p = sqrt(2 m K), so lambda = h / sqrt(2 m K). At the same kinetic energy, the lighter particle has the longer wavelength (lambda is proportional to 1/sqrt(m)).
  • For particles with the same momentum, the wavelength is the same, whatever their masses.
  • For a charged particle (charge q) accelerated from rest through a potential difference V, K = q V, so lambda = h / sqrt(2 m q V).
  • Electron accelerated through V volt (very high-yield formula):

lambda = 12.27 / sqrt(V) angstrom (approximately; lambda decreases as V increases)

  • Worked pattern 1: V = 100 V gives lambda = 12.27/10 = 1.227 angstrom. V = 10,000 V gives lambda = 12.27/100 = 0.1227 angstrom = 12.27 x 10^-12 m.
  • Worked pattern 2 (reverse): lambda = 1.227 x 10^-2 nm = 0.1227 angstrom gives sqrt(V) = 12.27/0.1227 = 100, so V = 10^4 V.
  • The wavelength of a macroscopic object is absurdly small (because h is tiny and m is large), which is why wave behaviour of everyday objects is never observed. For electrons, lambda is of the order of inter-atomic spacings in crystals, so crystals act as gratings for electron waves.

6. Davisson and Germer Experiment (in brief)

  • Davisson and Germer scattered a beam of electrons, accelerated through about 54 V, from a nickel crystal and measured the scattered intensity at different angles.
  • A strong maximum was found at a particular angle (50 degrees to the incident beam). The wavelength calculated from this diffraction maximum using Bragg's law matched the de Broglie wavelength lambda = h/(m v) of the 54 V electrons (about 0.165 nm).
  • Diffraction is a property of waves only. This experiment therefore confirmed the wave nature of moving electrons and verified the de Broglie relation experimentally. (G. P. Thomson obtained electron diffraction through thin metal foils independently at about the same time.)

7. Important Facts — One-Liners (for last-minute revision)

1. Work function phi0 is the minimum energy needed to free an electron from a metal surface; 1 eV = 1.6 x 10^-19 J.

2. Caesium has a low work function (2.14 eV) and is used in photoelectric cells.

3. Thermionic emission = emission by heating; field emission = emission by a strong electric field; photoelectric emission = emission by light.

4. Hertz first observed the photoelectric effect; Hallwachs showed the emitted charges are negative; Lenard studied the photocurrent.

5. Photocurrent is proportional to intensity (at fixed frequency above threshold).

6. Stopping potential V0: the negative anode potential at which the photocurrent becomes zero; Kmax = e V0.

7. V0 does not depend on intensity; it depends on frequency and on the material.

8. Threshold frequency nu0: below it, no emission at any intensity and for any duration of exposure.

9. Threshold wavelength lambda0 = c/nu0 = hc/phi0; emission needs lambda less than lambda0.

10. Photoemission is instantaneous — no time lag, even at very low intensity (if nu > nu0).

11. Photon energy E = h nu = hc/lambda; shortcut E (eV) = 1240/lambda (nm).

12. Photon momentum p = h/lambda = E/c; photon rest mass and charge are both zero; photon speed in vacuum is c.

13. Einstein equation: Kmax = h nu - phi0 = h(nu - nu0) = hc(1/lambda - 1/lambda0).

14. Slope of the V0-versus-nu graph is h/e, the same for every material.

15. Number of photons per second N = P lambda/(hc) for a source of power P.

16. Doubling intensity doubles the current, not Kmax; doubling frequency increases Kmax (it does not exactly double, because phi0 is subtracted).

17. de Broglie wavelength lambda = h/(m v) = h/p = h/sqrt(2 m K).

18. Electron through V volt: lambda = 12.27/sqrt(V) angstrom — V = 100 V gives 1.227 angstrom.

19. At the same kinetic energy, lambda is proportional to 1/sqrt(m): an electron's wavelength is about 43 times a proton's.

20. At the same momentum, all particles have the same de Broglie wavelength.

21. At the same accelerating potential, the electron's wavelength is much greater than an alpha particle's (smaller m and q of the electron).

22. Davisson–Germer: electron diffraction by a nickel crystal confirmed the wave nature of electrons.

23. In a photon–electron collision, total energy and total momentum are conserved.

8. Common Mistakes — Watch Out

1. Intensity versus frequency: intensity controls the NUMBER of photoelectrons (current); frequency controls their ENERGY (Kmax, V0). Swapping these two is the commonest error in this chapter.

2. Below threshold, nothing works: if nu < nu0, no emission occurs even if the intensity is made very large or the light falls for a long time.

3. Stopping potential sign and meaning: V0 is the magnitude of the retarding (negative) potential that makes the current zero; use Kmax = e V0 with V0 as a positive number.

4. Doubling frequency does NOT double Kmax: Kmax = h nu - phi0; the new Kmax is 2h nu - phi0, not 2(h nu - phi0).

5. Unit of lambda in the 1240 shortcut: E (eV) = 1240/lambda only when lambda is in nm. In metres, use E = hc/lambda in joules.

6. Angstrom–nm conversion in the 12.27 formula: lambda = 12.27/sqrt(V) is in angstrom; 1 angstrom = 0.1 nm. Many options differ only by this factor of 10.

7. Threshold comparisons: emission requires nu > nu0 but lambda < lambda0 — the wavelength inequality is reversed because lambda = c/nu.

8. Same KE versus same momentum versus same V: lambda = h/sqrt(2mK) (same K), lambda = h/p (same p — mass does not matter), lambda = h/sqrt(2mqV) (same V — both m and q matter). Read which quantity is kept the same.

9. Photon has no charge and no rest mass — a statement giving the photon a positive charge is always wrong.

10. Work function depends on the material, not on the intensity or frequency of the incident light.

11. Kmax is the maximum: electrons emitted from inside the metal lose extra energy in collisions, so most photoelectrons have kinetic energy less than Kmax; only surface electrons with no extra loss reach Kmax.

12. Saturation current versus stopping potential: raising intensity raises the saturation current but leaves V0 unchanged; raising frequency raises V0.

13. Electron-volt conversions: 1 eV = 1.6 x 10^-19 J — convert phi0 to joules before using h in J s, or work fully in eV using hc = 1240 eV nm.

14. de Broglie wavelength of slow, heavy objects is far too small to observe — do not apply diffraction ideas to macroscopic bodies; the formula still holds, the effect is simply unmeasurable.

Next step: after these notes, take the 30-question Objective Quiz of this chapter — including previous years' questions, with an explanation for every question.

एक टिप्पणी भेजें (0)
और नया पुराने