Electric Charges and Fields — Complete Notes
Subject: Physics • Class: 12 • Unit: Electrostatics (Electric Charges and Fields)
Place in the exam pattern: Questions come from this chapter every year — Coulomb's law and superposition, the field of a point charge and of a dipole (axial and equatorial), electric flux and Gauss's law with its standard applications (shell, solid sphere, line charge, plane sheet), and the torque and potential energy of a dipole are the most frequently asked parts. Most questions are numerical or based on how the field varies with distance, so every formula below must be practised with numbers, not just read.
Electrostatics is the study of electric charges at rest and the forces and fields they produce. This chapter builds the foundation of all of electricity: what charge is, how charges exert forces on each other, how the influence of a charge is described by the electric field, and how the symmetry of a charge distribution lets us find its field in one step through Gauss's law. Everything in the later chapters on potential, capacitance, current and magnetism rests on the ideas built here.
1. Electric Charge and Its Properties
- Electric charge is the property of matter due to which it experiences a force in an electric (and magnetic) field. There are two types of charge: positive and negative (named by Benjamin Franklin). Like charges repel and unlike charges attract.
- Charge is measured in coulomb (C). The charge on one electron is e = 1.6 x 10^-19 C; the electron carries -e and the proton +e.
- Additivity: the total charge of a system is the algebraic sum of the individual charges: Q = q1 + q2 + ... (signs included).
- Conservation: the total charge of an isolated system always remains constant. Charge can neither be created nor destroyed; it can only be transferred from one body to another, or created/destroyed in equal and opposite pairs.
- Quantisation: the charge on any body is always an integral multiple of the elementary charge: Q = n e, where n is an integer (positive, negative or zero). Charge is never found in fractions of e on a free body.
- Conductors (metals) allow charge to move freely through them; insulators (glass, rubber, plastic) do not. In a conductor in electrostatic equilibrium, all excess charge resides on the outer surface, and the charge density is higher where the surface is more sharply curved.
- A body can be charged by friction (transfer of electrons), conduction (direct contact with a charged body) and induction (bringing a charged body near, without contact). Charging by induction leaves the inducing body unchanged.
2. Coulomb's Law and the Principle of Superposition
- Coulomb's law: the force between two point charges is directly proportional to the product of the charges and inversely proportional to the square of the distance between them, and acts along the line joining them: F = (1/(4 pi epsilon0)) x q1 q2 / r^2.
- The constant 1/(4 pi epsilon0) = 9 x 10^9 N m^2 C^-2, where epsilon0 = 8.85 x 10^-12 C^2 N^-1 m^-2 is the permittivity of free space.
- In a medium of dielectric constant (relative permittivity) K, the force becomes F_medium = F_vacuum / K, because the permittivity of the medium is epsilon = K epsilon0.
- Coulomb's force is a central, conservative force, is attractive for unlike charges and repulsive for like charges, and obeys Newton's third law (the two forces are equal and opposite).
- The law holds for point charges (or for spherically symmetric distributions treated from outside). It fails to give the direct answer when the charges are extended bodies at close separation; such bodies are broken into small elements and the contributions are added.
- Principle of superposition: the total force on a charge due to a number of other charges is the vector sum of the forces due to each charge separately: F = F1 + F2 + F3 + ... Each force is calculated as if the other charges were absent. The same principle applies to the electric field.
| Comparison | Gravitational force | Electrostatic (Coulomb) force |
|---|---|---|
| Law | F = G m1 m2 / r^2 | F = (1/(4 pi epsilon0)) q1 q2 / r^2 |
| Nature | Always attractive | Attractive (unlike charges) or repulsive (like charges) |
| Strength | Extremely weak | Much stronger than gravity for the same particles |
| Medium | Unaffected by the medium | Reduced by a factor K in a dielectric medium |
3. Electric Field
- The electric field at a point is the force experienced by a unit positive test charge placed at that point: E = F / q0, unit N/C (same as V/m). It is a vector, directed along the force on a positive charge.
- The test charge q0 must be very small, so that it does not disturb the charges producing the field.
- Field of a point charge: E = (1/(4 pi epsilon0)) x Q / r^2, directed away from Q if Q is positive and towards Q if Q is negative. The field falls as 1/r^2.
- By superposition, the field of many charges is the vector sum of the fields of the individual charges. At the midpoint of two equal like charges the fields cancel (E = 0); at the midpoint of two equal unlike charges they add up.
- A charge q placed in a field E experiences the force F = q E; for a negative charge the force is opposite to the field.
- In a uniform field (E same in magnitude and direction everywhere, e.g. between two large oppositely charged parallel plates, away from the edges) a free charge moves with constant acceleration a = qE/m.
4. Electric Field Lines
- An electric field line is a curve whose tangent at every point gives the direction of the electric field at that point. Field lines are a pictorial way of representing the field.
- Field lines start on positive charges and end on negative charges (or start/end at infinity for an isolated charge). The number of lines leaving or entering a charge is proportional to the magnitude of the charge.
- Two field lines can never intersect, because at the point of intersection the field would have two directions at once, which is impossible.
- Field lines never form closed loops in electrostatics (unlike magnetic field lines).
- The density of lines (number per unit area normal to them) is proportional to the strength of the field: lines are crowded where the field is strong and spread out where it is weak.
- Field lines meet the surface of a conductor normally (perpendicularly) in electrostatic equilibrium; there is no component of the field along the surface, otherwise surface charges would move.
5. Electric Flux and Gauss's Law
- Electric flux through an area is a measure of the number of field lines passing through it: flux = E A cos(theta), where theta is the angle between the field E and the area vector (normal to the area). Unit: N m^2/C (also written V m).
- Flux is a scalar. It is positive if the field leaves the surface (theta < 90 degree) and negative if it enters (theta > 90 degree). If the field is parallel to the surface (theta = 90 degree), the flux is zero.
- For a non-uniform field or a curved surface, flux = sum over small elements of E . dA (surface integral of E over the area).
- Gauss's law: the total electric flux through any closed surface is (1/epsilon0) times the total charge enclosed by the surface: flux = q_enclosed / epsilon0.
- The flux depends only on the enclosed charge — not on the shape or size of the surface, and not on charges outside the surface. Charges outside contribute field at every point of the surface but zero net flux.
- If no charge is enclosed, the net flux is zero (as many lines enter as leave). A negative net flux means the surface encloses net negative charge.
- Gauss's law is most useful for charge distributions with spherical, cylindrical or planar symmetry, where E is constant in magnitude over a suitably chosen Gaussian surface.
6. Applications of Gauss's Law
| Charge distribution | Electric field | Remarks |
|---|---|---|
| Infinite line charge (linear density lambda) | E = lambda / (2 pi epsilon0 r) | Falls as 1/r; directed radially outward (for positive lambda) |
| Infinite plane sheet (surface density sigma) | E = sigma / (2 epsilon0) | Uniform — independent of distance from the sheet; same on both sides, directed away from the sheet |
| Thin spherical shell (total charge Q, radius R), outside (r > R) | E = (1/(4 pi epsilon0)) Q / r^2 | Acts as if all charge is at the centre |
| Thin spherical shell, inside (r < R) | E = 0 | No charge is enclosed by an interior Gaussian surface |
| Uniformly charged solid sphere (total charge Q, radius R), outside (r > R) | E = (1/(4 pi epsilon0)) Q / r^2 | Same as a point charge at the centre |
| Uniformly charged solid sphere, inside (r < R) | E = (1/(4 pi epsilon0)) Q r / R^3 | Increases linearly with r; zero at the centre, maximum at the surface |
| Charged conducting sphere or shell | Inside (material and hollow cavity): E = 0; outside: point-charge form | All charge resides on the outer surface |
| Infinite conducting sheet / just outside any conductor | E = sigma / epsilon0 | Twice the sheet value, because charge sits on the surface(s) facing the field region |
- For a hollow charged conductor with an empty cavity, the field inside the cavity is zero — this is electrostatic shielding: the interior region is shielded from external electrostatic fields, which is why it is safer to stay inside a car during lightning.
- At the surface of a solid charged sphere the two formulas (inside and outside) agree: E = (1/(4 pi epsilon0)) Q / R^2, the maximum value of the field.
7. Electric Dipole
- An electric dipole is a pair of equal and opposite charges, +q and -q, separated by a small distance 2a. Its dipole moment is p = q x 2a, directed from -q to +q along the axis. Unit: C m. The net charge of a dipole is zero, but its field and effects are not zero.
- Field on the axial line (on the axis, at distance r from the centre, r >> a): E_axial = (1/(4 pi epsilon0)) x 2p / r^3, directed along p.
- Field on the equatorial line (on the perpendicular bisector, at distance r, r >> a): E_equatorial = (1/(4 pi epsilon0)) x p / r^3, directed opposite to p.
- Hence at the same distance, E_axial = 2 x E_equatorial, and a dipole field falls as 1/r^3 — faster than a point-charge field (1/r^2) — because the fields of the two charges nearly cancel at large distances.
- Potential of a dipole at a general point: V = (1/(4 pi epsilon0)) x p cos(theta) / r^2, where theta is the angle between the dipole axis and the line joining the point to the centre. On the equatorial line theta = 90 degree, so V = 0 everywhere on the equatorial plane.
- Torque in a uniform field: a dipole placed at angle theta to a uniform field E experiences a torque tau = p E sin(theta), which tends to align the dipole with the field. The net force on the dipole in a uniform field is zero (only a torque acts); in a non-uniform field there is also a net force.
- Potential energy of a dipole: U = -p E cos(theta). U is minimum (-pE) at theta = 0 degree — stable equilibrium (dipole parallel to the field); maximum (+pE) at theta = 180 degree — unstable equilibrium; zero at theta = 90 degree.
- The work done in rotating a dipole from theta1 to theta2 is W = pE (cos(theta1) - cos(theta2)); rotating it from alignment (0 degree) to 60 degree increases its energy by pE/2, and to 180 degree by 2pE.
8. Continuous Charge Distributions
- When charges are spread smoothly, they are described by charge densities:
- Linear charge density: lambda = charge per unit length, C/m (charges on a wire or rod).
- Surface charge density: sigma = charge per unit area, C/m^2 (charges on a sheet, shell or conductor surface).
- Volume charge density: rho = charge per unit volume, C/m^3 (charges inside a solid sphere or other volume).
- The field of a continuous distribution is found by dividing it into small elements, treating each element (lambda dl, sigma dA or rho dV) as a point charge, and adding (integrating) the vector contributions of all elements — superposition applied to a continuum.
- On a conductor, the charge spreads over the surface and sigma is larger at sharper points (smaller radius of curvature). The field just outside a conductor is E = sigma / epsilon0, perpendicular to the surface, and zero inside the material.
- Standard results to remember: a uniformly charged ring has E = 0 at its centre (opposite elements cancel in pairs), and a uniformly charged disc/sphere is handled by building it up from rings or shells.
- Charge sharing: when two identical conducting spheres are brought in contact, charge flows until both have equal charge — the total charge is divided equally between them. This sharing principle is behind several force-ratio problems: after contact, recompute the charges first, then apply Coulomb's law.
9. Important Facts — One-Liners (for last-minute revision)
1. Charge: two types; like charges repel, unlike attract; SI unit coulomb (C); electron charge e = 1.6 x 10^-19 C.
2. Quantisation: Q = n e — charge always comes in whole multiples of e, never in fractions.
3. Conservation: total charge of an isolated system never changes; charge is only transferred, or created/destroyed in equal-opposite pairs.
4. Coulomb's law: F = (1/(4 pi epsilon0)) q1 q2 / r^2; 1/(4 pi epsilon0) = 9 x 10^9 N m^2 C^-2; epsilon0 = 8.85 x 10^-12 C^2 N^-1 m^-2.
5. In a medium: F_medium = F_vacuum / K — a dielectric always reduces the force (K > 1).
6. Superposition: forces and fields add as vectors; each charge acts independently of the others.
7. Electric field: E = F/q0, unit N/C; point charge: E = (1/(4 pi epsilon0)) Q/r^2, falls as 1/r^2.
8. Field lines: start on + charges, end on - charges; never intersect; never form closed loops; density shows field strength.
9. Flux: flux = E A cos(theta), theta measured from the area vector (normal); flux is zero when the field is parallel to the surface.
10. Gauss's law: flux through a closed surface = q_enclosed / epsilon0 — depends only on the enclosed charge.
11. Line charge: E = lambda/(2 pi epsilon0 r) — falls as 1/r.
12. Plane sheet: E = sigma/(2 epsilon0) — uniform, independent of distance; just outside a conductor E = sigma/epsilon0.
13. Spherical shell: E = 0 inside; outside it acts like a point charge at the centre.
14. Solid sphere: inside E is proportional to r (zero at the centre); outside E falls as 1/r^2; maximum at the surface.
15. Conductor: all charge on the outer surface; E = 0 inside the material and inside an empty cavity — electrostatic shielding.
16. Dipole moment: p = q x 2a, directed from -q to +q; net charge of a dipole is zero but p is not.
17. Dipole field: axial E = (1/(4 pi epsilon0)) 2p/r^3; equatorial E = (1/(4 pi epsilon0)) p/r^3; axial is twice equatorial at the same distance; both fall as 1/r^3.
18. Dipole potential: V = (1/(4 pi epsilon0)) p cos(theta)/r^2; V = 0 everywhere on the equatorial plane.
19. Dipole torque: tau = pE sin(theta) — maximum at 90 degree, zero at 0 degree and 180 degree; net force on a dipole in a uniform field is zero.
20. Dipole energy: U = -pE cos(theta) — minimum at 0 degree (stable), maximum at 180 degree (unstable).
21. Densities: lambda (C/m), sigma (C/m^2), rho (C/m^3); on a conductor, sigma is greatest where the surface curves most sharply.
22. Ring centre: the field at the centre of a uniformly charged ring is zero — opposite elements cancel in pairs.
23. Null point: between two like charges the zero-field point lies closer to the smaller charge; between unlike charges it lies outside, on the side of the smaller charge.
24. Contact sharing: identical conducting spheres in contact share the total charge equally; always recompute charges after contact before using Coulomb's law.
10. Common Mistakes / Points to Watch
1. Using Coulomb's law for close extended bodies: the 1/r^2 formula in its simple form is for point charges. For spheres, use it only with centre-to-centre distance and only when the spheres act as point charges (separation much larger than radii, or conductors with charge on the surface viewed from outside).
2. Forgetting the square on distance: both the force and the field vary as 1/r^2. Doubling the distance makes the force and the point-charge field one-fourth, not one-half.
3. Treating field and force as scalars: fields and forces are vectors. At a midpoint or a null point, directions decide the answer — add magnitudes only when the directions are the same.
4. Confusing the angle in flux: in flux = E A cos(theta), theta is the angle between E and the normal (area vector), not the angle with the plane itself. If the angle with the plane is given as phi, theta = 90 degree - phi.
5. Applying Gauss's law to outside charges: charges outside a closed surface contribute zero net flux, however close they are. Only the enclosed charge counts, though outside charges do affect the field at each point of the surface.
6. Mixing up shell and solid sphere: inside a charged shell (or conducting sphere) E = 0, but inside a uniformly charged solid non-conducting sphere E grows linearly with r. Read the words "hollow/conducting" versus "solid/uniform volume" carefully.
7. Sheet versus conductor factor of 2: an isolated infinite sheet gives E = sigma/(2 epsilon0) on each side; just outside a conductor the field is sigma/epsilon0. Using one formula in place of the other is a very common slip.
8. Dipole direction and the factor 2: p points from -q to +q (not + to -). The axial field has 2p in it, the equatorial only p — forgetting this factor reverses many ratio answers.
9. Dipole potential energy sign: U = -pE cos(theta). At theta = 0 degree U = -pE (minimum, stable), not +pE. The change in energy on rotating from 0 degree to theta is pE(1 - cos(theta)).
10. Thinking a dipole feels a net force in a uniform field: in a uniform field the forces on +q and -q are equal and opposite, so the net force is zero — only a torque acts. A net force appears only in a non-uniform field.
11. Quantisation slips: the number of electrons is n = Q/e with Q in coulomb and e = 1.6 x 10^-19 C. Watch the powers of ten — a microcoulomb charge already means about 10^13 electrons.
12. Charge after contact: when a charged sphere touches an identical uncharged sphere, each ends with half the total charge. Force problems after contact must use the new charges — using the old charge in Coulomb's law is the single most common error in this chapter.
13. Field inside a cavity: an empty cavity inside a charged conductor has E = 0, but if a charge is placed inside the cavity, the cavity field is not zero (charge is induced on the inner surface). The shielding statement applies to the empty-cavity case.
Next step: after these notes, take the 30-question Objective Quiz of this chapter — with previous years' questions included, and an explanation for every question.

