Electromagnetic Waves — Complete Notes
Subject: Physics • Class: 12 • Unit: Electromagnetic Waves
Place in the exam pattern: This is a low-weightage chapter — about one question a year — but its questions are among the most scoring in the whole paper, because they are short and formula-based. The most frequently asked parts are displacement current, the relation E0 = c B0, the ordering of the electromagnetic spectrum by wavelength or frequency, and the production and uses of each band of the spectrum. Learn the spectrum table by heart; a match-the-following question on it appears again and again.
Electromagnetic waves are waves of coupled, mutually regenerating electric and magnetic fields that travel through space at the speed of light, carrying energy and momentum without needing any material medium. This chapter first fixes a gap in Ampere's law by introducing the displacement current, then shows how a changing electric field and a changing magnetic field sustain each other as a free wave, and finally surveys the full electromagnetic spectrum from radio waves to gamma rays.
1. The Capacitor Paradox and Displacement Current
- Ampere's circuital law says that the line integral of the magnetic field around a closed loop equals mu0 times the total current passing through the surface bounded by the loop: oint B . dl = mu0 I.
- While a parallel-plate capacitor is being charged, a difficulty appears. Take a loop around the connecting wire. For a flat surface through the wire, the enclosed current is the conduction current I, so B is non-zero. But for a balloon-shaped surface that passes through the gap between the plates, the enclosed conduction current is zero (no charge crosses the gap), so the same law would give B = 0 for the same loop. One loop cannot give two answers — this contradiction is the capacitor paradox.
- The resolution: although no charge crosses the gap, the electric field between the plates changes with time as the charge on the plates grows, so the electric flux through the gap surface changes. A changing electric flux must itself act like a current.
- Displacement current (Id) is defined as Id = eps0 x dPhiE/dt, where PhiE is the electric flux through the surface. It is called a current because it produces a magnetic field exactly like a conduction current, even though no charge actually moves in the gap.
- For a charging capacitor, the displacement current in the gap is exactly equal to the conduction current in the wires: charge Q = C V, so Id = dQ/dt = C x dV/dt = I. The total current is therefore continuous — conduction current in the wires, displacement current in the gap — and the paradox disappears.
- Example: a capacitor of 20 micro F charged at dV/dt = 3 V/s carries Id = C dV/dt = 20 x 10^-6 x 3 = 60 x 10^-6 A = 60 micro A, equal to the conduction current in the leads.
2. Ampere-Maxwell Law and Maxwell's Equations in Words
- Maxwell corrected Ampere's law by adding the displacement current to the conduction current. The Ampere-Maxwell law is: oint B . dl = mu0 (Ic + Id) = mu0 Ic + mu0 eps0 dPhiE/dt. Now every surface bounded by the loop gives the same B, whether it cuts the wire or passes through the capacitor gap.
- The central new idea is symmetry: a changing magnetic field produces an electric field (Faraday's law), and a changing electric field produces a magnetic field (the displacement-current term). The two fields can therefore keep regenerating each other.
- Maxwell's equations in words (qualitative only):
1. Gauss's law for electricity: electric charges produce electric fields; the total electric flux out of a closed surface is the enclosed charge divided by eps0.
2. Gauss's law for magnetism: there are no isolated magnetic poles; the total magnetic flux out of any closed surface is always zero — magnetic field lines are closed loops.
3. Faraday's law: a changing magnetic flux produces an electric field around the loop (an EMF is induced).
4. Ampere-Maxwell law: magnetic fields are produced both by conduction currents and by changing electric fields (displacement current).
- Together these four statements predict that a disturbance of the fields travels through empty space as a wave with a fixed speed — the electromagnetic wave.
3. Nature and Properties of Electromagnetic Waves
- Source: electromagnetic waves are produced by accelerated charges. A charge at rest produces only an electric field; a charge moving with uniform velocity produces electric and magnetic fields but does not radiate; only an accelerated (or oscillating) charge radiates EM waves. An oscillating charge in an LC circuit or an antenna is the practical source.
- No medium needed: EM waves travel through vacuum. The changing electric field creates the changing magnetic field and vice versa, so the wave is self-sustaining and needs no material support — unlike sound, which needs a medium.
- Transverse nature: the electric field E and the magnetic field B oscillate perpendicular to each other and both perpendicular to the direction of propagation. E, B and the propagation direction form a mutually perpendicular set (E cross B points along the propagation direction).
- In phase: E and B in a plane wave oscillate sinusoidally with the same frequency, and they reach their maxima and zeros at the same time and place — they are in phase with each other.
- Speed: in free space every EM wave travels at c = 1/sqrt(mu0 eps0) = 3 x 10^8 m/s, the speed of light. In a medium of relative permittivity eps_r and relative permeability mu_r, the speed falls to v = c/sqrt(eps_r mu_r).
- Field amplitudes: the amplitudes of the two fields are linked by E0 = c B0, i.e. E/B = c at every instant. In a medium, E/B = v. Example: for E0 = 48 V/m, B0 = 48 / (3 x 10^8) = 1.6 x 10^-7 T — the magnetic field of a typical wave is extremely small in tesla units.
- Other properties: EM waves are not deflected by electric or magnetic fields (they carry no charge); they carry energy and momentum; they show reflection, refraction, interference, diffraction and polarisation; they obey c = f lambda in vacuum, and on entering a medium the frequency stays unchanged while the wavelength and speed change.
4. Energy and Momentum of Electromagnetic Waves
- Energy density: at any point, the electric field stores energy density uE = (1/2) eps0 E^2 and the magnetic field stores uB = B^2/(2 mu0). For an EM wave the two contributions are equal at every instant, so the total energy density is u = eps0 E^2 = B^2/mu0. Averaged over a cycle, u_av = (1/2) eps0 E0^2.
- Because the electric and magnetic contributions to the intensity are equal, the ratio of the electric-field contribution to the magnetic-field contribution to the intensity is 1 : 1.
- Intensity (I) is the energy crossing unit area per unit time: I = u_av x c, unit W/m^2. The direction of energy flow is given by the Poynting vector S = (1/mu0) (E cross B), whose magnitude averaged over a cycle equals the intensity.
- Momentum: an EM wave carrying energy U has momentum p = U/c. When radiation falls on a surface it exerts a force — radiation pressure.
- For a perfectly absorbing surface, the momentum delivered per unit area per unit time (the radiation pressure) is P = I/c. For a perfectly reflecting surface the momentum change doubles, so P = 2I/c.
- Radiation pressure is tiny at everyday intensities (sunlight at the Earth gives only a few micro-pascal) but it is real: it shapes comet tails and must be allowed for in precision space missions.
5. The Electromagnetic Spectrum — Full Table
The spectrum is the continuous range of EM waves ordered by wavelength (or frequency). The bands merge into one another; the boundaries are approximate, and the real distinction between neighbouring bands is often the way the waves are produced or detected.
| Band | Wavelength range | Frequency range | Production | Main uses |
|---|---|---|---|---|
| Radio waves | greater than 0.1 m | less than 3 x 10^9 Hz | Rapid acceleration and deceleration of charges in conducting wires (oscillating circuits, antennas) | Radio and TV communication, AM and FM broadcasting, mobile phones |
| Microwaves | 0.1 m to 1 mm | 3 x 10^9 to 3 x 10^11 Hz | Special vacuum tubes such as the klystron, magnetron and Gunn diode | Radar systems, satellite communication, microwave ovens (warming food) |
| Infrared waves | 1 mm to 700 nm | 3 x 10^11 to 4.3 x 10^14 Hz | Hot bodies and molecules (vibrating atoms and molecules) | Night-vision devices, TV remote controls, physiotherapy, keeping greenhouses and incubators warm, satellite weather imaging |
| Visible light | 700 nm to 400 nm | 4.3 x 10^14 to 7.5 x 10^14 Hz | Electrons in atoms jumping between energy levels | Vision, photography, optical instruments; red has the longest wavelength and violet the shortest |
| Ultraviolet rays | 400 nm to 1 nm | 7.5 x 10^14 to 3 x 10^17 Hz | Inner-shell electron transitions in atoms; the Sun, arc lamps and special tubes | Purifying and sterilising water and surgical instruments, LASIK eye surgery, detecting forged documents and bank notes, burglar alarms |
| X-rays | 1 nm to 10^-4 nm | 3 x 10^17 to 3 x 10^19 Hz | Sudden deceleration of fast electrons striking a metal target; inner-shell transitions | Medical diagnosis and radiotherapy, studying crystal structure, detecting cracks in industry and luggage scanning |
| Gamma rays | less than 10^-4 nm | greater than 3 x 10^19 Hz | Radioactive nuclei and nuclear reactions | Treating cancer cells (radiotherapy), sterilising medical equipment, studying nuclear structure |
- Order to memorise — increasing wavelength (decreasing frequency): Gamma rays, X-rays, Ultraviolet, Visible, Infrared, Microwaves, Radio waves. Reverse it for increasing frequency or increasing energy.
- Some standard pairings asked again and again: AM radio waves about 10^2 m; microwaves about 10^-2 m; infrared about 10^-4 m; X-rays about 10^-10 m; gamma rays have the smallest wavelength (and the highest frequency and photon energy) of the whole spectrum.
6. Production and Uses of Each Band — Detail
- Radio waves are produced by accelerated charges in antennas fed by oscillating circuits. Their long wavelengths diffract around buildings and hills, which suits them to broadcasting. In c = f lambda, a 1368 kHz broadcast has lambda = (3 x 10^8)/(1.368 x 10^6) = about 219 m — the size scale of the transmitting antenna region.
- Microwaves are short radio waves. Their wavelength (millimetres to centimetres) suits compact radar antennas, and they pass through the ionosphere, so they are used for satellite and spacecraft communication. In a microwave oven the frequency (about 2.45 GHz) is chosen so that water molecules in food absorb the energy strongly and the food warms from inside.
- Infrared waves are emitted by every warm body — they are the "heat waves". The Earth absorbs visible sunlight and re-radiates infrared, which greenhouse gases partly trap (the greenhouse effect). Infrared cameras see warm objects in the dark, and every TV remote sends its signal as infrared pulses.
- Visible light is the narrow band the human eye can detect, from red (about 700 nm, lowest frequency) to violet (about 400 nm, highest frequency). It is produced when outer electrons in atoms return to lower energy levels.
- Ultraviolet rays are produced by the Sun and by arc discharges. In small doses they help the skin make vitamin D, but excess causes tanning, burns and snow-blindness. Because they kill germs, they are used to purify water and sterilise instruments; because some materials fluoresce under them, they expose forged currency and documents.
- X-rays are produced when high-energy electrons strike a metal target (an X-ray tube). They pass through flesh but are absorbed by bone, giving medical radiographs; in crystallography their diffraction reveals the structure of crystals and molecules.
- Gamma rays come from radioactive nuclei and nuclear reactions. They are the most penetrating and most energetic part of the spectrum, used in controlled doses to destroy cancer cells and to sterilise sealed medical equipment.
7. Important Facts — One-Liners (for last-minute revision)
1. Displacement current: Id = eps0 dPhiE/dt — a changing electric flux acts as a current and produces a magnetic field.
2. Capacitor continuity: in a charging capacitor, the displacement current in the gap equals the conduction current in the wires at every instant; for a capacitor, Id = C dV/dt.
3. Ampere-Maxwell law: oint B . dl = mu0 (Ic + Id) — magnetic fields come from conduction currents AND changing electric fields.
4. No magnetic poles: total magnetic flux out of any closed surface is zero (Gauss's law for magnetism).
5. Source of EM waves: only accelerated charges radiate; a stationary charge or a charge in uniform motion does not.
6. Transverse wave: E, B and the propagation direction are mutually perpendicular; E cross B gives the propagation direction.
7. Speed in vacuum: c = 1/sqrt(mu0 eps0) = 3 x 10^8 m/s — the same for every band of the spectrum.
8. Speed in a medium: v = c/sqrt(eps_r mu_r); on entering a medium the frequency is unchanged, the wavelength shrinks.
9. Amplitude relation: E0 = c B0, i.e. E/B = c at every instant (in a medium, E/B = v).
10. In phase: E and B oscillate with the same frequency and reach maxima together.
11. Energy sharing: electric and magnetic energy densities in the wave are equal; each contributes half the intensity (ratio 1 : 1).
12. Average energy density: u_av = (1/2) eps0 E0^2; intensity I = u_av c.
13. Momentum: p = U/c for energy U; radiation pressure is I/c on a perfect absorber and 2I/c on a perfect reflector.
14. Spectrum order (increasing wavelength): gamma, X-rays, ultraviolet, visible, infrared, microwaves, radio waves.
15. Gamma rays have the smallest wavelength, the highest frequency and the highest photon energy in the spectrum.
16. Radio waves have the longest wavelength; AM radio waves are about 10^2 m and are produced in oscillating circuits and antennas.
17. Microwaves (about 10^-2 m) are produced by klystrons and magnetrons and are used in radar, satellite communication and ovens.
18. Infrared is emitted by hot bodies; it works remote controls and night-vision devices and drives the greenhouse effect.
19. Visible band: 700 nm (red) to 400 nm (violet) — the only band the eye detects.
20. Ultraviolet purifies and sterilises water and instruments, and is used in LASIK surgery; excess UV causes sunburn and snow-blindness.
21. X-rays (about 10^-10 m) come from fast electrons striking a metal target; they are used in medical imaging and crystal-structure studies.
22. Gamma rays come from radioactive nuclei and are used to treat cancer and sterilise medical equipment.
23. Basic wave relation: c = f lambda — e.g. a 100 MHz FM signal has lambda = 3 x 10^8 / 10^8 = 3 m.
24. No deflection: EM waves are uncharged, so electric and magnetic fields do not deflect them.
8. Common Mistakes — Watch Out
1. Thinking displacement current is a flow of charges: no charge crosses the capacitor gap. The displacement current is the effect of the changing electric field there; it is a "current" only because it produces a magnetic field like one.
2. Forgetting that Id equals the conduction current: in a charging capacitor Id (gap) = I (wires) at every instant — not zero, not larger, and in the same sense around the circuit.
3. Saying any moving charge radiates: a charge moving with uniform velocity does not radiate EM waves. Only accelerated charges do; "charges moving with uniform speed" is the standard wrong statement in property questions.
4. Mixing up E/B and B/E: E0/B0 = c (about 3 x 10^8 in SI), so B0 = E0/c is always a very small number in tesla. Writing B0 = c E0 inflates the answer by c^2.
5. Reversing the spectrum order: wavelength increases gamma to radio, but frequency and energy increase radio to gamma. Decide which quantity the question orders before choosing.
6. Confusing neighbouring bands' uses: radar and ovens are microwaves, not radio waves; remote controls are infrared, not microwaves; water purification is ultraviolet, not infrared; cancer treatment by radiation is gamma rays, while X-rays are mainly for imaging and crystal studies.
7. Changing the frequency at a boundary: when a wave enters a medium, f stays the same; v and lambda change together (v = c/sqrt(eps_r mu_r), lambda_medium = lambda_vacuum/sqrt(eps_r mu_r)).
8. Unequal energy sharing: some students assign most of the wave's energy to the electric field. In an EM wave the electric and magnetic energy densities are exactly equal — the intensity ratio is 1 : 1.
9. Radiation pressure factor of two: a perfect absorber takes pressure I/c; a perfect reflector takes 2I/c because the momentum reverses. Read which surface the question describes.
10. Unit slips in c = f lambda: convert kHz and MHz to Hz and nm to m before dividing; most wrong options in these numericals are pure power-of-ten slips.
11. Thinking EM waves need a medium like sound: they are self-propagating field disturbances and travel fastest in vacuum; a medium only slows them down.
12. Phase error: E and B in a plane EM wave are in phase (peaks together), unlike the voltage and current in an AC circuit. A B-field expression with sin instead of the E-field's cos (or a phase shift) is wrong.
Next step: after these notes, take the 30-question Objective Quiz of this chapter — including previous years' questions, with an explanation for every question.

