🎓 RAS • RPSC • SSC • RRB • Teaching परीक्षाओं की तैयारी
मुफ़्त Notes, Daily Current Affairs और Online Mock Tests — सब कुछ एक ही जगह

NEET Physics Notes: Laws of Motion — Complete Notes

 


Laws of Motion — Complete Notes

Subject: Physics • Class: 11 • Unit: Laws of Motion

Place in the exam pattern: Questions come from this chapter almost every year — F = ma systems, connected bodies and pulleys, impulse and momentum conservation, static and kinetic friction, motion on an incline, banking of roads and centripetal force are the most frequently asked parts. Most questions are numerical, so free-body diagrams and sign/direction discipline must be practised exactly.

The chapter answers one basic question: why and how does the motion of a body change? The answer is force. Aristotle's view (a force is needed to keep a body moving) was wrong; Galileo's experiments on inclined planes showed that a body moving on a perfectly smooth surface would keep moving forever with the same velocity — no force is needed to maintain uniform motion, only to change it.

1. Force and Inertia — Newton's First Law

  • Force is that which changes (or tends to change) the state of rest or of uniform motion of a body. Its SI unit is the newton (N): 1 N = 1 kg m/s^2.
  • Inertia is the inherent property of a body by virtue of which it resists any change in its state of rest or of uniform motion in a straight line. Inertia is measured by mass: the greater the mass, the greater the inertia.
  • Newton's first law of motion: every body continues in its state of rest or of uniform motion in a straight line, unless compelled to change that state by an external force. This is also called the law of inertia. It defines force qualitatively and selects the frames (inertial frames) in which the laws hold.
  • Everyday examples: passengers fall forward when a moving bus brakes suddenly (upper body continues moving); passengers fall backward when the bus starts suddenly (upper body stays at rest); a carpet is beaten with a stick to remove dust (dust stays at rest and falls off); an athlete runs before a long jump (inertia of motion).
  • A frame of reference in which the first law holds is an inertial frame. The Earth is approximately inertial for most purposes. A frame accelerating with respect to an inertial frame is a non-inertial frame (the second law needs a correction — pseudo force — in such frames, see §9).

2. Linear Momentum and Newton's Second Law

  • Linear momentum of a body is p = m v. It is a vector, in the direction of velocity. SI unit: kg m/s (equivalently N s).
  • Newton's second law of motion: the rate of change of linear momentum of a body is directly proportional to the external force applied, and the change takes place in the direction of the force:

F = dp/dt

  • For a body of constant mass, dp/dt = m dv/dt = m a, so the familiar form is:

F = m a

  • The law is a vector law: it applies component by component (Fx = m ax, Fy = m ay, Fz = m az). If the net external force is zero, the acceleration is zero and the momentum stays constant — the first law follows from the second law.
  • F in F = ma is the NET (resultant) external force on the body — never just one of the forces, and internal forces never appear (they cancel in action–reaction pairs).
  • Unit facts: 1 N is the force that gives a mass of 1 kg an acceleration of 1 m/s^2. In CGS, 1 dyne = 10^-5 N.
  • Worked pattern: momentum changes from 20 kg m/s to 50 kg m/s in 3 s under a constant force along the motion. F = delta p / delta t = (50 - 20)/3 = 10 N.

3. Impulse

  • When a large force acts for a very short time (a bat hitting a ball, a collision with the ground), the product of force and time is what matters.
  • Impulse of a force = F x delta t (for a constant force). By the second law, impulse = change in momentum:

Impulse = F delta t = delta p = m v - m u

  • SI unit of impulse: N s (same as kg m/s). For a varying force, impulse = area under the force–time (F–t) graph.
  • Average force in a short impact: F_avg = delta p / delta t. Worked pattern: a 0.1 kg ball hits a wall at 20 m/s and rebounds at 20 m/s, contact time 0.01 s. delta p = 0.1 x (20 - (-20)) = 4 kg m/s, so F_avg = 4 / 0.01 = 400 N.
  • Worked pattern (rebound from ground): a 0.15 kg ball dropped from 10 m rebounds to the same height (g = 10 m/s^2). Impact speed v = sqrt(2 g h) = sqrt(200) = 14.14 m/s; it leaves with the same speed upwards. Impulse = 2 m v = 2 x 0.15 x 14.14 = 4.2 kg m/s (approx.).
  • Cushioning works by increasing delta t for the same delta p, reducing F_avg (catching a ball with hands moving back, sand pits in high jump, packing glass in straw).

4. Newton's Third Law

  • Newton's third law of motion: to every action there is an equal and opposite reaction. If body A exerts a force F_AB on body B, then body B exerts F_BA = -F_AB on body A.
  • Action and reaction act on two DIFFERENT bodies — therefore they never cancel each other, even though they are equal and opposite. Each body accelerates according to the net force on itself.
  • Action–reaction pairs are always of the same nature (both gravitational, both contact, both frictional), arise and vanish simultaneously, and either force may be called the action.
  • Examples: walking (foot pushes ground backward, ground pushes foot forward); swimming; recoil of a gun; a horse pulling a cart (the system horse + cart moves because of the external friction from the ground, not because action–reaction cancel).
  • The third law holds in inertial frames and also between bodies at rest or in motion, in contact or at a distance (gravitation).

5. Conservation of Linear Momentum

  • If the net external force on a system is zero, the total linear momentum of the system remains constant:

p_total = m1 v1 + m2 v2 + ... = constant

  • This follows directly from the second law (F_ext = dp/dt = 0) and the third law (internal forces cancel in pairs). It holds collision by collision and explosion by explosion, whatever the internal forces are.
  • Collisions: in a completely inelastic collision the bodies stick together and move with a common velocity. Worked pattern: body A of mass m moving with v1 hits stationary body B of the same mass m and sticks to it. m v1 = (m + m) v2, so v1 : v2 = 2 : 1.
  • Explosion: a shell at rest explodes into fragments; the vector sum of the fragment momenta is zero. Worked pattern: masses in ratio 2 : 2 : 1 (i.e. 2m/5, 2m/5, m/5); the two equal fragments fly off perpendicularly with speed v each, carrying a resultant momentum sqrt(2) x (2m/5) v; the light fragment must carry the opposite momentum, so its speed = sqrt(2) x (2m/5) v / (m/5) = 2 sqrt(2) v.
  • Recoil of a gun: M V = m v in magnitude, so V = m v / M. Worked pattern: bullet 0.02 kg at 200 m/s from a 4 kg gun: V = 0.02 x 200 / 4 = 1 m/s.
  • Caution: momentum is a vector — conserve it component-wise. In collisions with the ground or a wall, external impulses act, so the momentum of the ball alone is NOT conserved (only the impulse equation applies).

6. Equilibrium of a Particle and Common Forces

  • A particle is in equilibrium when the net force on it is zero: sum F = 0 (equivalently sum Fx = 0 and sum Fy = 0). The particle then stays at rest or moves with constant velocity.
  • Worked pattern: a body of weight 100 N hangs by a string; a horizontal force pulls it so the string makes 45 degree with the vertical. Vertical balance: T cos 45 degree = 100, so T = 100 / 0.707 = 141 N (approx.). The horizontal force equals T sin 45 degree = 100 N.
  • Common forces met in mechanics:
ForceActs betweenDirection / key fact
Weight (gravity)Earth and the bodyVertically downward, W = m g, acts at the centre of gravity
Normal reaction (N)Two surfaces in contactPerpendicular to the surfaces, pushing the body; adjusts itself
Tension (T)A string/rope and the bodyAlong the string, away from the body (a string can only pull). For a massless, frictionless pulley the tension is the same throughout the string
Friction (f)Two surfaces in contactTangential to the surfaces, opposes relative motion or the tendency of relative motion
Spring forceA spring and the bodyF = k x, directed towards the natural length (restoring)
  • Free-body diagram (FBD) discipline: isolate ONE body; draw ONLY the forces acting ON it (weight, normal reaction, tension, friction, applied force); never draw forces the body exerts on others; then resolve along two perpendicular axes and apply F = m a (or sum F = 0 for equilibrium) axis by axis.

7. Dynamics of Connected Bodies and Pulleys (High-Yield Numericals)

  • Bodies joined by a light inextensible string move with the same acceleration magnitude; write F = m a for the whole system (external forces only) or for each body separately (needed when tension is asked).
  • Atwood machine (two masses over a frictionless pulley): a = (m2 - m1) g / (m1 + m2) and T = 2 m1 m2 g / (m1 + m2) (m2 > m1). Worked pattern: 4 kg and 6 kg give a = (6 - 4) g / 10 = g/5, T = 2 x 4 x 6 g / 10 = 4.8 g = 48 N (g = 10 m/s^2).
  • Mass on a table + hanging mass (smooth table, pulley at the edge): driving force = hanging weight only; total mass = both masses. a = m_hanging g / (m_table + m_hanging); tension T = m_table x a. Worked pattern: 3 kg on the table, 2 kg hanging: a = 2 x 10 / 5 = 4 m/s^2, T = 3 x 4 = 12 N.
  • Body pulled up a frictionless incline by a cord: resolve the weight along the plane. Net force along the plane = T - m g sin theta. Worked pattern: 5 kg box, incline 30 degree, T = 30 N: net = 30 - 5 x 10 x 0.5 = 5 N, so a = 1 m/s^2 up the plane.
  • Smooth incline (no pull): a = g sin theta down the plane, independent of mass. For theta = 30 degree, a = 5 m/s^2. The normal reaction is N = m g cos theta.

8. Friction

  • Friction is the tangential contact force that opposes relative motion (or its tendency) between two surfaces in contact. It is a self-adjusting force (up to a limit) and does not depend on the area of contact (to a good approximation).
  • Static friction (f_s) acts when there is no relative motion; it adjusts itself to match the applied force, up to a maximum (limiting) value:

f_s_max = mu_s N (limiting friction)

  • Kinetic (sliding) friction (f_k) acts during relative motion and is approximately constant:

f_k = mu_k N, with mu_k < mu_s (sliding is a little easier than starting).

  • Laws of friction (limiting): (1) friction opposes relative motion/tendency; (2) limiting friction is proportional to the normal reaction, f_max proportional to N; (3) it is independent of the area of contact; (4) it depends on the nature of the two surfaces (through mu). The coefficient of friction mu has no unit and no dimensions.
  • Angle of friction: tan of the angle between the normal reaction and the resultant contact force at the point of slipping = mu_s.
  • Angle of repose (theta): the minimum angle of inclination at which a body just begins to slide down an incline. At this angle, m g sin theta = mu_s m g cos theta, so:

mu_s = tan theta — Worked pattern: angle of repose 30 degree gives mu_s = tan 30 degree = 0.577.

  • Worked pattern (limiting value): 5 kg block, mu_s = 0.4, N = m g = 50 N, so f_s_max = 0.4 x 50 = 20 N.
  • Worked pattern (does it move?): 2 kg block, applied force 15 N, mu_s = 0.5, mu_k = 0.4, N = 20 N. f_s_max = 10 N < 15 N, so the block moves; f_k = 8 N; a = (15 - 8)/2 = 3.5 m/s^2.
  • Worked pattern (kinetic friction on a rough surface): 2 kg block pulled by 10 N, mu_k = 0.2: f_k = 0.2 x 20 = 4 N; a = (10 - 4)/2 = 3 m/s^2.
  • Friction on an incline: a body sliding down a rough incline has a = g (sin theta - mu_k cos theta). If mu_s >= tan theta, the body does not slide at all (self-locking).
  • Worked pattern (rough vs smooth incline, time ratio): equal length L, angle 45 degree, rough-surface time = 2 x smooth-surface time. Since t is proportional to 1/sqrt(a), a_rough = a_smooth/4. With a_smooth = g sin 45 degree and a_rough = g sin 45 degree (1 - mu_k) at 45 degree, 1 - mu_k = 1/4, so mu_k = 0.75.
  • Friction as a necessary force: a body on the floor of an accelerating car is carried along by static friction; the maximum acceleration of the car without slipping is a_max = mu_s g. Worked pattern: mu_s = 0.15 gives a_max = 1.5 m/s^2. The same friction provides the centripetal force on a level circular road (§10).
  • Friction is not always a nuisance: walking, gripping, braking and belt drives all work because of friction; it is reduced by lubrication, ball bearings and streamlining where it wastes energy.

9. Non-Inertial Frames and Pseudo Force

  • In a frame accelerating with acceleration A relative to an inertial frame, Newton's laws can still be used if an extra pseudo force is added on every body:

F_pseudo = - m A (opposite to the acceleration of the frame)

  • The pseudo force is not a real interaction — no other body exerts it, and it has no reaction pair. It appears only in the non-inertial frame.
  • Lift problems (apparent weight): for a person of mass m in a lift, the scale reads the normal reaction N:

- Lift accelerating up with a: N = m (g + a) — person feels heavier.

- Lift accelerating down with a: N = m (g - a) — person feels lighter.

- Lift at rest or moving with constant velocity: N = m g.

- Lift in free fall (a = g, e.g. cable snapped): N = 0 — weightlessness.

  • Worked pattern: 60 kg man, lift accelerating up at 2 m/s^2: N = 60 x (10 + 2) = 720 N.

10. Dynamics of Uniform Circular Motion

  • A particle in uniform circular motion has constant speed but continuously changing velocity (direction), so it is accelerated towards the centre. The required centripetal acceleration is:

a_c = v^2 / r = omega^2 r, and the centripetal force F = m v^2 / r = m omega^2 r

  • Centripetal force is NOT a new force — it is the name of the net inward resultant provided by real forces: tension (whirling a stone), friction (car on a level road), a component of the normal reaction (banked road), gravity (planets, satellites).
  • Worked pattern: 1000 kg car, level circular road, r = 50 m, v = 10 m/s: F = 1000 x 100 / 50 = 2000 N, supplied by friction.
  • Whirling a bob (tension scaling): T = m r omega^2, so at fixed radius T is proportional to (speed)^2. Doubling the speed makes the tension 4 times; quadrupling the tension (same radius) makes the speed double (e.g. 10 rpm becomes 20 rpm).
  • Level road (car turning): friction provides the centripetal force, so v_max = sqrt(mu_s r g) for turning without skidding.
  • Banking of roads: the road is tilted at an angle theta so that a component of the normal reaction points towards the centre. At the optimum speed no friction is needed at all and:

tan theta = v^2 / (r g) — Worked pattern: r = 50 m, v = 10 m/s, g = 10 m/s^2: tan theta = 100/500 = 1/5, so theta = tan inverse (1/5). At this speed tyre wear is minimum. With friction, the maximum safe speed is higher: v_max^2 = r g (mu_s + tan theta) / (1 - mu_s tan theta).

  • Vertical circle (in brief): speed and tension both vary — tension is maximum at the lowest point (T = m v^2/r + m g) and minimum at the highest point (T = m v^2/r - m g); the wire/string is therefore most likely to break at the lowest point. For the string to stay taut at the top, gravity alone must be able to provide the centripetal force: v_top >= sqrt(g r) (worked pattern: r = 2.5 m gives v_min = sqrt(25) = 5 m/s). The minimum speed at the bottom for completing the circle is sqrt(5 g r) (from energy conservation, of the Work–Energy chapter).
  • Conical pendulum (in brief): a bob on a string tracing a horizontal circle with the string at angle theta to the vertical: T cos theta = m g and T sin theta = m v^2 / r, giving tan theta = v^2 / (r g) — the same banking relation.
  • Centrifugal force is the pseudo force m v^2 / r directed outward, felt only in the rotating (non-inertial) frame; in the ground frame there is no outward force on the circling body.

11. Important Facts — One-Liners (for last-minute revision)

1. First law: a body stays at rest or in uniform straight-line motion unless a net external force acts — it defines inertia and inertial frames.

2. Inertia is measured by mass — heavier body, greater inertia; inertia does not depend on speed.

3. Momentum p = m v — a vector along velocity; unit kg m/s.

4. Second law: F = dp/dt; for constant mass, F = m a, where F is the NET external force.

5. 1 N = 1 kg m/s^2 — the force that accelerates 1 kg by 1 m/s^2.

6. Impulse = F delta t = delta p — unit N s; for a varying force it is the area under the F–t graph.

7. Third law: action and reaction are equal, opposite, simultaneous — and act on different bodies, so they never cancel.

8. Momentum conservation: if net external force on a system is zero, total momentum is constant — conserve it component-wise.

9. Completely inelastic collision: bodies stick together; equal masses, one at rest, give common velocity = half the incoming velocity.

10. Equilibrium of a particle: sum F = 0, i.e. sum Fx = 0 and sum Fy = 0 separately.

11. Atwood machine: a = (m2 - m1) g / (m1 + m2); T = 2 m1 m2 g / (m1 + m2).

12. Smooth incline: a = g sin theta (mass-independent); N = m g cos theta.

13. Limiting friction f_max = mu_s N; kinetic friction f_k = mu_k N; mu_k < mu_s; mu is dimensionless.

14. Static friction is self-adjusting — it equals mu_s N only at the point of slipping.

15. Angle of repose: mu_s = tan theta (angle at which sliding just begins).

16. Rough incline: a = g (sin theta - mu_k cos theta); no sliding if tan theta <= mu_s.

17. Maximum car acceleration without a load slipping: a_max = mu_s g (friction accelerates the load).

18. Pseudo force = - m A in a frame accelerating at A — it has no reaction pair and is not a real force.

19. Lift: N = m (g + a) going up-accelerating, m (g - a) coming down-accelerating, 0 in free fall (weightlessness).

20. Centripetal force F = m v^2 / r — a resultant of real forces (tension/friction/normal/gravity), not a separate force.

21. Tension in whirling ∝ (speed)^2 at fixed radius — double speed, four times tension.

22. Banking: tan theta = v^2 / (r g) at the optimum (frictionless, minimum-wear) speed.

23. Level-road turning: v_max = sqrt(mu_s r g) — friction alone provides the centripetal force.

24. Vertical circle: tension maximum at the lowest point, minimum at the top; string stays taut at the top only if v_top >= sqrt(g r).

12. Common Mistakes — Watch Out

1. Using one force instead of the net force in F = m a — always sum ALL external forces (with signs) first.

2. Cancelling action and reaction — they act on different bodies and never cancel; draw the FBD of ONE body at a time.

3. Writing static friction = mu_s N always — static friction adjusts from 0 up to mu_s N; it equals mu_s N only at limiting equilibrium (about to slip).

4. Using mu_s after the body starts moving — once sliding begins, use mu_k (smaller), so acceleration jumps up at the start of motion.

5. Forgetting that friction opposes RELATIVE motion (or its tendency) — its direction must be decided from the tendency, not blindly against the applied force; friction can even drive motion (walking, load in an accelerating car).

6. Taking N = m g everywhere — on an incline N = m g cos theta; in an accelerating lift N = m (g +/- a); N equals the pressing force, whatever creates it.

7. Conserving momentum of a single ball bouncing off the ground/wall — the ground exerts an external impulse; use impulse = delta p for the ball, and momentum conservation only for a system with zero net external impulse.

8. Treating momentum as a scalar in explosions/collisions — it is a vector; perpendicular fragment momenta combine by the Pythagoras rule, not by simple addition.

9. Adding a separate "centripetal force" in the FBD — centripetal force is the resultant of the real forces towards the centre; adding it again double-counts.

10. In Atwood/table systems, using only one mass in F = m a for the system — the driving force is the net external force, but the mass accelerated is the TOTAL mass of all connected bodies.

11. Sign errors on an incline — fix the axis along the plane, take the down-plane (or up-plane) direction as positive consistently, and use m g sin theta along the plane, m g cos theta into the plane.

12. Pseudo force in the wrong direction — it is always opposite to the acceleration of the FRAME (lift accelerating up → pseudo force down → heavier; accelerating down → pseudo force up → lighter).

13. Confusing rpm/angular speed scaling — tension depends on the SQUARE of the speed: doubling rpm quadruples tension, not doubles it.

14. Banking formula inverted — tan theta = v^2/(r g), not r g / v^2; check with dimensions and the limit (higher speed needs more banking).

Next step: after these notes, take the 30-question Objective Quiz of this chapter — including previous years' questions, with an explanation for every question.

एक टिप्पणी भेजें (0)
और नया पुराने