Motion in a Straight Line — Complete Notes
Subject: Physics • Class: 11 • Unit: Kinematics
Place in the exam pattern: This is the foundation chapter of mechanics. Questions come every year on the equations of uniformly accelerated motion, motion under gravity (free fall and bodies thrown up), distance travelled in the nth second, relative velocity in one dimension, and the slope–area reading of position–time, velocity–time and acceleration–time graphs. Most questions are numerical, so every formula below must be practised with numbers, not just read.
Motion in a straight line (rectilinear motion) is the simplest form of motion: a body moves along a single straight path, so its position at any instant is fixed by one coordinate. This chapter builds the language of all later mechanics — displacement, velocity, acceleration, the three equations of uniformly accelerated motion, and the graphical description of motion.
1. Frame of Reference, Position and Path
- Motion is always described with respect to a frame of reference — a coordinate system (origin, axes) with a clock attached to it. The same body can be at rest in one frame and moving in another: a passenger is at rest in the frame of the train but moves with the train in the frame of the ground.
- For motion along a straight line we need only one axis, usually the x-axis. The position of the body at time t is its coordinate x(t), measured from the chosen origin, with a sign fixed by the chosen positive direction.
- The path length is the actual length of the route travelled along the line. It depends on the frame only through the motion itself; reversing the positive direction changes the signs of positions, not the physics.
- A body is treated as a point object when its size is negligible compared with the distances it travels (a car on a long highway, a falling stone).
2. Displacement and Distance
- Displacement is the change in position: displacement = x2 - x1, where x1 is the position at time t1 and x2 the position at time t2. It is a vector (in one dimension, a signed quantity): positive if the final position is on the positive side of the initial position, negative otherwise.
- Distance (path length) is the total length of the path actually travelled. It is always positive (or zero) and is a scalar.
- Distance is always greater than or equal to the magnitude of displacement: distance >= |displacement|. The two are equal only when the body moves in one direction without ever turning back.
- Example: a body goes from x = 2 m to x = 10 m and back to x = 6 m. Distance = 8 + 4 = 12 m, but displacement = 6 - 2 = +4 m.
| Quantity | Symbol | Vector / Scalar | Can it be negative? | Depends on path? |
|---|---|---|---|---|
| Distance | s (path length) | Scalar | Never | Yes — total route travelled |
| Displacement | delta x = x2 - x1 | Vector (signed in 1-D) | Yes | No — only initial and final positions |
3. Average Velocity and Average Speed
- Average velocity is displacement divided by the time taken: v_avg = (x2 - x1) / (t2 - t1) = delta x / delta t. Its SI unit is m/s. It carries the sign of the displacement.
- Average speed is total distance divided by total time: average speed = total path length / total time. It is always positive.
- In general, average speed >= |average velocity|, with equality only for motion in a single direction without reversal.
- If a body covers equal distances at speeds v1 and v2 (in the same direction), the average speed is the harmonic mean: v_avg = 2 v1 v2 / (v1 + v2). If it travels for equal times at speeds v1 and v2, the average speed is the arithmetic mean: (v1 + v2) / 2.
- For uniformly accelerated motion, the average velocity over an interval is also the mean of the initial and final velocities: v_avg = (u + v) / 2 (valid only when acceleration is constant).
4. Instantaneous Velocity and Speed
- Instantaneous velocity is the velocity at a particular instant: the limit of the average velocity as the time interval shrinks to zero, v = dx/dt — the rate of change of position with time.
- On a position–time graph, the instantaneous velocity at any instant is the slope of the tangent to the curve at that point.
- Instantaneous speed is simply the magnitude of the instantaneous velocity: speed = |v|. A speedometer shows instantaneous speed.
- If the position is given as a polynomial, differentiate term by term. Example: x = 3t^2 + 2t + 5 gives v = dx/dt = 6t + 2, so at t = 2 s, v = 14 m/s.
- Velocity is uniform (constant) when equal displacements occur in equal intervals of time, however small. For uniform velocity, instantaneous and average velocity are the same at every instant.
5. Acceleration
- Average acceleration is the change in velocity divided by the time taken: a_avg = (v2 - v1) / (t2 - t1) = delta v / delta t, unit m/s^2.
- Instantaneous acceleration is a = dv/dt = d^2x/dt^2 — the slope of the velocity–time graph at that instant.
- Acceleration is a vector: it points in the direction of the change in velocity, which need not be the direction of motion. When a body slows down, its acceleration is opposite to its velocity; this is often called retardation (deceleration), and it simply means a has the sign opposite to v.
- Acceleration is uniform (constant) when equal changes in velocity occur in equal intervals of time. All three equations of motion in the next section require uniform acceleration.
- Zero velocity does not mean zero acceleration: at the top of its flight a thrown ball has v = 0 but a = g downward throughout.
6. Uniformly Accelerated Motion — the Three Equations
For a body moving with initial velocity u, constant acceleration a, velocity v after time t and displacement s in that time:
| Equation | Form | What it links | What is missing |
|---|---|---|---|
| First | v = u + a t | v, u, a, t | s |
| Second | s = u t + (1/2) a t^2 | s, u, a, t | v |
| Third | v^2 = u^2 + 2 a s | v, u, a, s | t |
- Sign convention: choose one direction as positive (usually the direction of initial motion, or downward for falling bodies) and give every quantity — u, v, a, s — its sign accordingly. For a body thrown upward with upward positive, a = -g.
- Displacement in time t can also be written using the average velocity: s = ((u + v) / 2) x t.
- If the body starts from rest, u = 0 and the equations reduce to v = a t, s = (1/2) a t^2, v^2 = 2 a s. If it comes to rest, v = 0.
- Distance travelled in the nth second: s_n = u + (a/2) (2n - 1). For a body starting from rest, the distances in successive seconds are in the ratio 1 : 3 : 5 : 7 : ... (odd numbers), because s_n is proportional to (2n - 1).
7. Motion under Gravity
Near the surface of the Earth, a freely moving body has a constant downward acceleration g (about 9.8 m/s^2; take g = 10 m/s^2 when the question says so). Air resistance is neglected. The three equations apply with a = g (with sign) — this is free fall when the body is simply dropped, and the same equations govern a body thrown up or down.
| Case | Initial velocity | Key results |
|---|---|---|
| Dropped from rest at height h | u = 0 | Time to fall: t = sqrt(2h/g); speed on hitting ground: v = sqrt(2 g h); distance in nth second proportional to (2n - 1) |
| Thrown downward with speed u from height h | u (downward) | v^2 = u^2 + 2 g h; h = u t + (1/2) g t^2 |
| Thrown upward with speed u | u (upward) | Time to reach the top: t = u/g; maximum height: H = u^2 / (2g); total time of flight back to the start point: T = 2u/g |
- At the highest point of an upward throw, v = 0 but a = g (downward) — acceleration never becomes zero during the flight.
- The upward journey and the downward journey are mirror images: the time to go up equals the time to come down to the same level, and the speed at any height is the same while going up and coming down.
- A body thrown upward from a height (a bridge, a tower) and striking the ground below: take the displacement with sign. With upward positive, s is negative (final point below start), u positive, a = -g; solving s = u t - (1/2) g t^2 gives the time of flight, and the starting height follows from it.
8. Relative Velocity in One Dimension
- The velocity of A with respect to B is v_AB = v_A - v_B, where v_A and v_B are the velocities of A and B measured in the ground frame (with signs).
- Same direction: the relative speed is the difference of the speeds, |v_A - v_B|. A faster body gains on a slower one at this rate.
- Opposite directions: the relative speed is the sum of the speeds, v_A + v_B (with signs, v_AB = v_A - (-v_B)). Two approaching trains close the gap at the sum of their speeds.
- Relative velocity is the tool for meeting and crossing problems: the time for a train of length L to cross a pole is L / v_train; to cross a platform of length P it is (L + P) / v_train; for two trains crossing each other, use the sum of lengths divided by the relative speed.
- Regular-service problems (buses leaving every T minutes) are solved by writing the spacing between consecutive buses as v_bus x T and equating it to (relative speed x time between meetings) in each direction.
9. Graphs of Motion — Slopes and Areas
Graphs compress the whole motion into one picture. Only two rules are needed: slope and area.
| Graph | Slope gives | Area under curve gives | Shape for uniform velocity | Shape for uniform acceleration |
|---|---|---|---|---|
| Position–time (x–t) | Velocity (slope of tangent) | — (no meaning) | Straight line; slope = velocity | Parabola (curve bending upward for a > 0) |
| Velocity–time (v–t) | Acceleration | Displacement (area between curve and time axis, with sign) | Horizontal line (a = 0) | Straight line; slope = acceleration |
| Acceleration–time (a–t) | — (no direct meaning) | Change in velocity (delta v) | — | Horizontal line at height a |
- On an x–t graph, a steeper line means a faster body; a horizontal line means the body is at rest; a line sloping downward means motion in the negative direction. Two bodies meet where their x–t lines cross.
- On a v–t graph, area above the time axis counts as positive displacement and area below it as negative displacement; total distance uses the sum of the absolute areas, while displacement uses the signed sum.
- Worked reading: if velocity rises uniformly from 0 to 20 m/s in 4 s and then stays at 20 m/s for 4 s more, the displacement in 8 s is the area: (1/2 x 4 x 20) + (4 x 20) = 40 + 80 = 120 m, and the acceleration in the first part is the slope, 20/4 = 5 m/s^2.
- No graph of motion can have a vertical segment (a body cannot be at two positions at the same instant), and an x–t graph can never be a closed loop returning to an earlier time.
10. Important Facts — One-Liners (for last-minute revision)
1. Frame of reference: motion and rest are relative — a body at rest in one frame may be moving in another.
2. Displacement: delta x = x2 - x1; a vector, fixed by the initial and final positions only.
3. Distance >= |displacement| always; equality only when the body never reverses direction.
4. Average velocity: v_avg = delta x / delta t. Average speed: total distance / total time; average speed >= |average velocity|.
5. Equal distances at v1, v2: average speed = 2 v1 v2 / (v1 + v2). Equal times: average speed = (v1 + v2) / 2.
6. Instantaneous velocity: v = dx/dt — the slope of the tangent to the x–t graph.
7. Instantaneous speed = |v|; a speedometer reads instantaneous speed.
8. Acceleration: a = dv/dt = d^2x/dt^2 — the slope of the v–t graph; unit m/s^2.
9. Retardation is not a separate quantity — it is acceleration opposite in sign to the velocity.
10. Three equations (uniform a only): v = u + a t; s = u t + (1/2) a t^2; v^2 = u^2 + 2 a s.
11. Average-velocity form: s = ((u + v)/2) x t for uniform acceleration.
12. nth second: s_n = u + (a/2)(2n - 1); from rest, successive seconds give distances in the ratio 1 : 3 : 5 : 7.
13. Free fall from height h: t = sqrt(2h/g), impact speed v = sqrt(2 g h).
14. Thrown up at u: rise time u/g, maximum height u^2/(2g), total flight time 2u/g.
15. At the top of a throw: v = 0, but a = g downward — acceleration is never zero in flight.
16. Up and down symmetry: time up = time down to the same level; speed at a height is the same in both directions.
17. Relative velocity: v_AB = v_A - v_B; same direction — difference of speeds; opposite directions — sum of speeds.
18. Train crossing: pole — L/v; platform — (L + P)/v; another train — (L1 + L2)/relative speed.
19. x–t graph: slope = velocity; horizontal line = rest; crossing lines = meeting of two bodies.
20. v–t graph: slope = acceleration; signed area = displacement; total area magnitude = distance.
21. a–t graph: area = change in velocity, delta v.
22. Uniform velocity means a = 0 and v = average velocity at every instant.
23. Sign convention first: fix the positive direction before substituting; for upward motion with upward positive, a = -g throughout.
24. g value: use g = 10 m/s^2 only when the question directs it; otherwise 9.8 m/s^2.
11. Common Mistakes — Watch Out
1. Using distance in place of displacement: average velocity uses displacement, not path length. A round trip back to the start has zero average velocity but a non-zero average speed.
2. Applying the three equations when acceleration is not uniform: v = u + a t and the others are valid only for constant acceleration. For variable acceleration, use v = dx/dt and a = dv/dt.
3. Sign errors under gravity: pick the positive direction once and keep it. For a body thrown up with upward positive, a = -g for the whole flight — going up as well as coming down.
4. Saying acceleration is zero at the top of a throw: only the velocity is zero at the top; acceleration remains g downward, which is why the body comes back.
5. Confusing s_n with total distance in n seconds: s_n = u + (a/2)(2n - 1) is the distance in the nth second alone; the total in n seconds is s = u n + (1/2) a n^2.
6. Averaging speeds wrongly: for equal distances the average speed is the harmonic mean 2 v1 v2/(v1 + v2), not (v1 + v2)/2. The arithmetic mean applies to equal time intervals.
7. Reading a v–t area as distance when part lies below the axis: area below the axis is negative displacement. Displacement is the signed sum; distance is the sum of magnitudes.
8. Taking the x–t slope as acceleration: the slope of the x–t graph is velocity. Acceleration comes from the slope of the v–t graph (or the curvature of the x–t graph).
9. Relative velocity with wrong signs: write v_AB = v_A - v_B with signed velocities. For opposite directions this automatically becomes a sum of speeds; do not subtract the magnitudes.
10. Forgetting lengths in crossing problems: a train crossing a platform must cover its own length plus the platform length; only for a pole (a point) is the distance just the train's length.
11. Using v = (u + v)/2 for average velocity in general motion: this shortcut holds only for uniform acceleration.
12. Mixing up time of flight formulas: for a throw up and back to the same level, T = 2u/g. From a height, or to a lower level, solve the quadratic s = u t + (1/2) a t^2 with signs instead of forcing this formula.
Next step: after these notes, take the 30-question Objective Quiz of this chapter — including previous years' questions, with an explanation for every question.
