Ray Optics and Optical Instruments — Complete Notes
Subject: Physics • Class: 12 • Chapter: Ray Optics and Optical Instruments (Chapter 9)
Place in the exam pattern: This is one of the most scoring Physics chapters. Questions come almost every year from the mirror formula and magnification, the lens-maker formula and power of a lens, combinations of lenses in contact, total internal reflection and the critical angle, refraction through a prism, and the magnifying power of a microscope and a telescope. Most questions are numerical, so every formula below must be practised with the sign convention, not just memorised.
Ray optics (geometrical optics) treats light as rays that travel in straight lines in a homogeneous medium and change direction only by reflection and refraction at surfaces. It explains image formation by mirrors and lenses and the working of optical instruments.
1. Sign Convention and Basic Terms (Learn This First)
- New Cartesian sign convention is used throughout this chapter:
- All distances are measured from the pole of the mirror (or the optical centre of the lens).
- Distances measured in the direction of the incident light (left to right, the usual diagram direction) are positive; distances measured against it are negative.
- Heights measured upward from the principal axis are positive; heights downward are negative.
- Consequences used again and again: for a mirror, the object distance u is always negative (object is on the incident-light side). A concave mirror has f negative and a convex mirror has f positive. For a lens, a convex (converging) lens has f positive and a concave (diverging) lens has f negative.
- Reflection: the angle of incidence equals the angle of reflection, and the incident ray, reflected ray and normal lie in one plane. Refraction: a ray bends at the boundary of two media because its speed changes; Snell's law: mu1 sin i = mu2 sin r, where mu is the refractive index.
- Refractive index: mu = c / v (speed of light in vacuum / speed in the medium). It is also the ratio real depth / apparent depth for near-normal viewing. A medium with larger mu is optically denser (light is slower there), which is not the same as mass density.
2. Reflection and Spherical Mirrors
- A spherical mirror is part of a hollow sphere: concave (reflecting surface caves in, converging) or convex (reflecting surface bulges out, diverging). Radius of curvature R and focal length are related by f = R / 2.
- Mirror formula: 1/f = 1/v + 1/u, where v = image distance, u = object distance.
- Magnification: m = h'/h = -v/u. Negative m means an inverted (real) image; positive m means an erect (virtual) image. |m| > 1 = enlarged, |m| < 1 = diminished.
| Object position (concave mirror) | Image position | Nature and size |
|---|---|---|
| At infinity | At focus F | Real, inverted, point-sized |
| Beyond C (centre of curvature) | Between F and C | Real, inverted, diminished |
| At C | At C | Real, inverted, same size (m = -1) |
| Between C and F | Beyond C | Real, inverted, enlarged |
| At F | At infinity | Real, inverted, highly enlarged |
| Between F and pole | Behind the mirror | Virtual, erect, enlarged |
- A convex mirror always forms a virtual, erect, diminished image between the pole and F, for any object position — hence its use as a rear-view mirror (wide field of view).
- Worked pattern 1: an object is placed 20 cm in front of a concave mirror of focal length 15 cm. With signs, u = -20 cm, f = -15 cm. 1/v = 1/f - 1/u = -1/15 + 1/20 = -1/60, so v = -60 cm (real image 60 cm in front of the mirror) and m = -v/u = -3 (inverted, 3 times enlarged).
- Worked pattern 2: an object 30 cm in front of a convex mirror (f = +15 cm): 1/v = 1/15 + 1/30 = 1/10, so v = +10 cm (behind the mirror) and m = -v/u = +1/3 (virtual, erect, one-third size).
3. Refraction at a Plane Surface
- Light going from a rarer to a denser medium bends towards the normal; from denser to rarer it bends away from the normal.
- Apparent depth: an object in a denser medium (say water, mu) viewed from a rarer medium (air) near the normal appears raised: apparent depth = real depth / mu. Viewed from a denser medium, an object in a rarer medium appears at an apparent height = real height x mu.
- Worked pattern: a coin lies under 12 cm of water (mu = 4/3). Apparent depth = 12 / (4/3) = 9 cm.
- A glass slab shifts an object viewed through it by a normal shift = t (1 - 1/mu), where t is the thickness. For t = 6 cm and mu = 1.5, shift = 6 x (1 - 2/3) = 2 cm. A ray passing through a slab emerges parallel to the incident ray, displaced sideways (lateral shift).
4. Total Internal Reflection (TIR) and Its Applications
- When light travels from a denser to a rarer medium, the refracted ray bends away from the normal. At one particular angle of incidence the refracted ray grazes the surface (angle of refraction = 90 degree). This angle is the critical angle ic, given by sin ic = 1/mu = mu(rarer) / mu(denser).
- For incidence greater than ic, no refraction occurs at all: the whole light is reflected back into the denser medium. This is total internal reflection. Two conditions are compulsory: (1) light must go from denser to rarer medium, (2) angle of incidence must exceed the critical angle.
- Worked pattern 1: for mu = 1.5 (glass to air), sin ic = 1/1.5 = 0.667, so ic is about 41.8 degree. For mu = root 2, sin ic = 1/root 2, so ic = 45 degree.
- Worked pattern 2 (speed form): if the speeds of light in two media are 1.5 x 10^8 m/s (denser) and 2.0 x 10^8 m/s (rarer), sin ic = 1.5/2.0 = 0.750, so ic = sin^-1 (0.750).
| Application | How TIR is used |
|---|---|
| Optical fibre | Core of higher mu, cladding of lower mu; light entering at a suitable angle keeps reflecting totally and travels kilometres with little loss (endoscopy, communication) |
| Sparkling of diamond | Diamond has mu = 2.42, so ic is only about 24.4 degree; cut faces trap light by repeated TIR |
| Mirage | Hot air near the ground is rarer; light from the sky undergoes TIR in the air layers and looks like water reflection |
| Totally reflecting prisms | Prisms (45 degree - 90 degree - 45 degree) turn light by 90 degree or 180 degree without the light loss of silvered mirrors |
| Shining of an air bubble / cracked glass | TIR at the glass-air or water-air boundary makes the surface shine |
5. Refraction at a Spherical Surface
- For a single spherical surface separating media mu1 (object side) and mu2 (image side), with radius of curvature R: mu2/v - mu1/u = (mu2 - mu1)/R. The sign of R is positive if the centre of curvature lies on the side the light is going to.
- Worked pattern: a point object in air (mu1 = 1) is 20 cm from a convex glass surface (mu2 = 1.5) of radius 10 cm. Then 1.5/v - 1/(-20) = (1.5 - 1)/10 = 0.05, so 1.5/v = 0.05 - 0.05 = 0, giving v = infinity — the refracted rays emerge parallel.
- This single-surface formula, applied twice (once at each face), is the basis of the lens-maker formula.
6. Lenses — Lens-Maker Formula, Image Formation
- A lens is a transparent medium bounded by two refracting surfaces. Convex = thicker in the middle, converging, f positive. Concave = thinner in the middle, diverging, f negative.
- Lens formula: 1/f = 1/v - 1/u. Magnification: m = h'/h = v/u.
- Lens-maker formula: 1/f = (mu - 1)(1/R1 - 1/R2), where mu is the refractive index of the lens material relative to the surrounding medium, and R1, R2 are the radii of the two surfaces with signs per the convention. For an equi-convex lens with both radii R: 1/f = (mu - 1)(2/R).
| Object position (convex lens) | Image position | Nature and size |
|---|---|---|
| At infinity | At F2 | Real, inverted, point-sized |
| Beyond 2F1 | Between F2 and 2F2 | Real, inverted, diminished |
| At 2F1 | At 2F2 | Real, inverted, same size (m = -1) |
| Between F1 and 2F1 | Beyond 2F2 | Real, inverted, enlarged |
| At F1 | At infinity | Real, inverted, highly enlarged |
| Between F1 and optical centre | Same side as object | Virtual, erect, enlarged (magnifying glass) |
- A concave lens always forms a virtual, erect, diminished image on the object side, between F and the optical centre.
- Worked pattern 1 (lens-maker): a biconvex lens has radii 20 cm each and mu = 1.5. 1/f = (1.5 - 1)(1/20 + 1/20) = 0.5 x 0.1 = 0.05 per cm, so f = 20 cm and power P = 100/20 = +5 D.
- Worked pattern 2 (image): an object 30 cm from a convex lens of f = 20 cm: 1/v = 1/f + 1/u = 1/20 - 1/30 = 1/60, so v = 60 cm and m = v/u = -2 (real, inverted, double size).
- Worked pattern 3 (plano-convex): one flat face (R = infinity) and one convex face of R = 20 cm, mu = 1.5: 1/f = 0.5 x (1/20 - 0) = 1/40, so f = 40 cm.
- Worked pattern 4 (equal-size image): an image of the same size as the object (m = -1) needs u = v = 2f. If the image is formed on a wall x away from the lens, v = x = 2f, so f = x/2.
- If a lens is immersed in a liquid whose mu is close to the lens mu, its focal length increases; if the liquid mu exceeds the lens mu, a convex lens behaves as a diverging lens.
7. Power of a Lens and Combination of Lenses
- Power: P = 1/f (in metres) = 100 / f (in cm), unit dioptre (D). Convex lens: P positive; concave lens: P negative. Shorter focal length = stronger lens.
- Worked pattern: a convex lens of f = 25 cm has P = 100/25 = +4 D.
- Lenses in contact: powers and reciprocals of focal length simply add: P = P1 + P2 + ... and 1/F = 1/f1 + 1/f2 + ... The total magnification is the product: M = m1 x m2 x ...
- Worked pattern 1: a convex lens (f = +40 cm, P = +2.5 D) in contact with a concave lens (f = -25 cm, P = -4 D) gives P = 2.5 - 4 = -1.5 D — the combination is diverging.
- Worked pattern 2: two thin lenses of the same focal length f, one convex (+f) and one concave (-f), in contact: 1/F = 1/f - 1/f = 0, so F = infinite (the combination acts like a plane glass plate).
- Worked pattern 3: four identical convex lenses, each of power p and magnification m, in contact: power = 4p, total magnification = m^4.
- Worked pattern 4 (lenses separated): a parallel beam through a convex lens (f = 20 cm) converges 20 cm beyond it. A concave lens (f = 5 cm) placed d from it will re-collimate the beam if the convergence point lies at its virtual focus, i.e. 20 - d = 5, so d = 15 cm.
- Worked pattern 5 (glycerin between lenses): two equi-convex lenses of focal length f in contact give F1 = f/2. Filling the gap with glycerin (same mu as glass) creates a biconcave glycerin lens of focal length -f between them, so 1/F2 = 1/f + 1/f - 1/f = 1/f and F2 = f. Hence F1 : F2 = 1 : 2.
8. Refraction Through a Prism
- A prism (apex angle A) deviates a ray towards its base. Total deviation: delta = (i1 + i2) - A, and inside the prism r1 + r2 = A.
- At minimum deviation (delta m), the ray passes symmetrically: i1 = i2 and r1 = r2 = A/2. The prism formula: mu = sin((A + delta m)/2) / sin(A/2).
- Worked pattern: for A = 60 degree and mu = root 2, sin((60 + delta m)/2) = root 2 x sin 30 degree = root 2/2, so (60 + delta m)/2 = 45 degree and delta m = 30 degree.
- For a thin prism (small A), delta is about (mu - 1)A, nearly independent of the angle of incidence.
- Dispersion: white light splits into colours in a prism because mu depends on wavelength — violet (shortest wavelength) deviates the most, red the least. A rainbow is dispersion + refraction + internal reflection of sunlight in raindrops; in the secondary rainbow the colours are reversed and the light has reflected twice inside the drop. The observer must have the sun behind to see a rainbow.
- The blue colour of the sky and the reddening of the sun at sunrise/sunset are due to scattering of light by air molecules (short wavelengths scatter most).
9. The Human Eye and Defects of Vision (in brief)
- The eye lens forms a real, inverted image on the retina; the eye adjusts its focal length by accommodation (ciliary muscles). The near point of a normal eye is 25 cm (least distance of distinct vision, D); the far point is infinity.
- Myopia (short sight): image forms in front of the retina; corrected by a concave (diverging) lens. Hypermetropia (long sight): image forms behind the retina; corrected by a convex (converging) lens. Presbyopia (ageing) is corrected by bifocal lenses; astigmatism by cylindrical lenses.
10. Optical Instruments — Microscope and Telescope
- Simple microscope (magnifying glass): one convex lens; magnifying power M = 1 + D/f when the final image is at the near point, and M = D/f when at infinity (D = 25 cm).
- Compound microscope: objective (very small f o) forms a real, enlarged image; the eyepiece (f e) magnifies it further. Magnifying power (final image at near point): M = (L / f o)(1 + D / f e), where L is the tube length (distance between the two lenses' focal points region, as given in the question). With the final image at infinity, M = (L / f o)(D / f e).
- Worked pattern: f o = 2 cm, f e = 4 cm, L = 40 cm, D = 25 cm: M = (40/2)(25/4) = 20 x 6.25 = 125 (final image at the near point, using M = (L/f o)(D/f e) as in the standard textbook pattern for this data).
- Astronomical (refracting) telescope, normal adjustment (final image at infinity): magnifying power M = -f o / f e; tube length = f o + f e. The negative sign means the image is inverted.
- Worked pattern 1: f o = 140 cm, f e = 5 cm: |M| = 140/5 = 28. Worked pattern 2: f o = 100 cm, f e = 5 cm: tube length = 100 + 5 = 105 cm and |M| = 20.
- With the final image at the near point, a telescope has M = -(f o / f e)(1 + D / f e) and a shorter tube.
- A good telescope objective needs a large focal length (for high magnifying power) and a large aperture (more light-gathering power, brighter image, better resolution) — all three advantages come together.
- Reflecting telescopes use a concave mirror as the objective: no chromatic aberration and less spherical aberration, and a mirror can be made much larger than a lens.
11. Important Facts — One-Liners (for last-minute revision)
1. Mirror formula: 1/f = 1/v + 1/u; mirror magnification: m = -v/u.
2. Lens formula: 1/f = 1/v - 1/u; lens magnification: m = v/u. (Note the sign difference between the two magnification formulas.)
3. For every spherical mirror, f = R/2.
4. Concave mirror f is negative, convex mirror f is positive; convex lens f is positive, concave lens f is negative (Cartesian convention).
5. A convex mirror and a concave lens ALWAYS give a virtual, erect, diminished image.
6. Lens-maker formula: 1/f = (mu - 1)(1/R1 - 1/R2).
7. Power: P = 100/f(cm) dioptre; convex positive, concave negative.
8. Lenses in contact: powers add (P = P1 + P2), magnifications multiply (M = m1 x m2).
9. A convex (+f) and concave (-f) lens of equal |f| in contact act as a plane plate: F = infinity, P = 0.
10. Snell's law: mu1 sin i = mu2 sin r; mu = c/v = real depth / apparent depth.
11. Critical angle: sin ic = 1/mu (denser to rarer). At i = ic the refracted ray grazes the surface at 90 degree.
12. TIR needs BOTH: denser-to-rarer travel AND incidence above ic.
13. Diamond mu = 2.42 gives ic of about 24.4 degree — the secret of its sparkle.
14. Apparent depth = real depth / mu; glass-slab normal shift = t(1 - 1/mu).
15. Single spherical surface: mu2/v - mu1/u = (mu2 - mu1)/R.
16. Prism: delta = i1 + i2 - A; at minimum deviation mu = sin((A + delta m)/2) / sin(A/2); thin prism delta is about (mu - 1)A.
17. In dispersion, violet deviates most, red the least; a rainbow needs the sun behind the observer.
18. Simple microscope: M = 1 + D/f (image at near point), D = 25 cm.
19. Compound microscope: M = (L/f o)(1 + D/f e) — small f o and small f e give large M.
20. Telescope (normal adjustment): M = -f o/f e, length = f o + f e; a large aperture gives brightness and resolution.
21. Myopia is corrected by a concave lens; hypermetropia by a convex lens.
22. An equal-size real image (m = -1) is formed only at u = v = 2f, for both a concave mirror and a convex lens.
23. A lens immersed in a liquid of higher mu than itself changes nature: a convex lens starts diverging.
24. Image formation needs regular reflection and/or refraction; the colours of objects come from the constituent colours of the light falling on them.
12. Common Mistakes — Watch Out
1. Mixing the two magnification formulas: for a mirror m = -v/u, for a lens m = +v/u. Using the lens formula for a mirror flips the sign and the answer.
2. Sign of u: in the Cartesian convention u is negative for a real object. Forgetting this one sign ruins most mirror/lens numericals.
3. Power from f in cm: P = 100/f(cm), not 1/f(cm). f = 25 cm gives +4 D, not 0.04 D.
4. Critical angle direction: sin ic = 1/mu applies only for light going from the denser medium to air (or to the rarer medium, using the relative mu). TIR is impossible from rarer to denser.
5. At i = ic, the angle of refraction is 90 degree (grazing ray), not 0 degree and not equal to ic.
6. Combination of lenses: focal lengths do NOT add; powers (1/f values) add. Magnifications multiply, they do not add.
7. Equal focal lengths, opposite nature: a convex and a concave lens of the same |f| in contact cancel out (F = infinity) — the answer is not f/2.
8. Lens in a medium: the lens-maker mu is the RELATIVE refractive index (lens w.r.t. the surrounding medium). A lens in water is weaker than in air.
9. Apparent depth direction: objects in a denser medium look raised (depth divided by mu); objects in a rarer medium seen from a denser one look farther (multiplied by mu). Do not swap them.
10. Prism formula angles: r1 + r2 = A and delta = i1 + i2 - A; at minimum deviation i1 = i2. Using delta = i1 + i2 + A is a common slip.
11. Microscope vs telescope formulas: microscope M grows with tube length L and small focal lengths; telescope M = f o/f e needs a LARGE f o. Swapping f o and f e is the classic error.
12. Telescope length in normal adjustment is f o + f e, not f o - f e and not the magnifying power.
13. Virtual image distances: a virtual image from a mirror lies BEHIND the mirror (v positive) and from a lens on the object side (v negative). Report the position the question asks for (from the lens vs from the mirror) — read the options fully.
14. Rainbow direction: the sun must be at the observer's back. Any statement with the observer facing the sun is the wrong statement.
Next step: after these notes, take the 30-question Objective Quiz of this chapter — including previous years' questions, with an explanation for every question.

