🎓 RAS • RPSC • NEET • SSC • RRB • Teaching परीक्षाओं की तैयारी
मुफ़्त Notes, Daily Current Affairs और Online Mock Tests — सब कुछ एक ही जगह
🩺 NEET (UG) Hub — Notes, Quiz और Mock Tests
Class 11-12 Chapter-wise Notes (Hindi + English), 30-Question Quiz और PYQ Mock Tests — बिल्कुल मुफ़्त
🌿 Biology 🧪 Chemistry ⚛ Physics 📝 NEET Mock Tests — Free

NEET Physics Notes: Wave Optics — Complete Notes


 

Wave Optics — Complete Notes

Subject: Physics • Class: 12 • Unit: Wave Optics

Place in the exam pattern: Questions come from this chapter every year — Huygens principle and wavefronts, Young's double-slit experiment (fringe width and its changes with slab, medium and wavelength), single-slit diffraction and the width of the central maximum, resolving power of microscopes and telescopes, and polarisation (Malus law and Brewster's law) are the most frequently asked parts. Most questions are short numericals or statement questions, so every formula below must be practised with numbers, not just read.

Wave optics treats light as a wave. It explains the phenomena that ray optics cannot — interference, diffraction and polarisation — all of which follow from one starting point: the Huygens principle of wavefronts and secondary wavelets. This chapter builds that wave picture completely: how a wavefront travels and refracts, how two coherent waves superpose to give fringes, how a single slit spreads light into a diffraction pattern, how finely an instrument can resolve two close objects, and how the transverse nature of light shows itself in polarisation.

1. Wavefront and Huygens Principle

  • A wavefront is the locus (surface) of all points of the medium which are vibrating in the same phase at a given instant. Light rays are lines perpendicular to the wavefront, drawn in the direction of propagation.
  • Types of wavefront: from a point source the wavefront is spherical; from a line source (such as a slit) it is cylindrical; a small part of a spherical wavefront at a very large distance from the source is effectively a plane wavefront. Sunlight reaching the Earth is treated as a plane wavefront.
  • Huygens principle: (i) every point on a wavefront acts as a source of secondary wavelets which spread out in all directions with the speed of light in that medium; (ii) the new wavefront at a later time is the envelope (common tangent surface) of these secondary wavelets in the forward direction.
  • The secondary wavelets are not equally strong in all directions — their amplitude is maximum in the forward direction and zero in the backward direction, which is why no backward-propagating wavefront is formed and light does not retrace its path spontaneously.
  • The time taken by light to travel between two wavefronts along any ray is the same — wavefronts are surfaces of constant optical path from the source.

2. Reflection and Refraction on the Basis of Huygens Principle

  • Refraction (proof in words): let a plane wavefront fall obliquely on a plane surface separating two media in which the speeds of light are v1 (medium 1) and v2 (medium 2). While one end of the incident wavefront travels a distance v1 t in medium 1 to reach the surface, the secondary wavelet from the other end grows to radius v2 t in medium 2. The envelope of the wavelets in medium 2 is the refracted wavefront. From the geometry of the two triangles sharing the same side on the surface, sin i / sin r = v1 / v2 — a constant for the pair of media. This is Snell's law, with mu2 / mu1 = v1 / v2 = c / v2 divided by c / v1; since mu = c / v, the law can also be written mu1 sin i = mu2 sin r.
  • Two direct consequences proved by the wave picture: (i) the frequency of light does not change on refraction (the wavefronts must match at the surface at every instant), but the wavelength changes: lambda in a medium = lambda(vacuum) / mu, and the speed becomes v = c / mu; (ii) if v2 is less than v1 (optically denser second medium), the refracted wavefront tilts towards the normal (r less than i) — exactly as observed.
  • Reflection (proof in words): for a plane wavefront reflected at a plane mirror, in the same time t one end of the wavefront travels a distance vt before reaching the mirror, while the secondary wavelet from the end that reached the mirror first grows to radius vt in the same medium. The envelope gives the reflected wavefront, and the two triangles are congruent, giving angle of incidence = angle of reflection. Reflected wavefronts remain in the same medium, so speed, wavelength and frequency are all unchanged in reflection.
  • The Huygens construction also shows why a wavefront stays plane after reflection from a plane surface and after refraction at a plane surface, and why it changes shape (converges or diverges) at curved surfaces.

3. Coherent Sources and Interference — Basic Ideas

  • Interference is the redistribution of light energy when two (or more) waves superpose: at some points the waves meet in phase and the intensity is maximum (constructive interference); at others they meet in opposite phase and the intensity is minimum (destructive interference). No energy is destroyed — the energy missing at the minima appears at the maxima.
  • Coherent sources are two sources which emit waves of the same frequency with a constant phase difference (zero or any fixed value) between them. Only coherent sources give a sustained (steady) interference pattern. Two independent sources are never coherent, because atoms emit light in short, random bursts and the phase difference keeps changing randomly — the pattern averages out to uniform illumination.
  • In practice, coherent sources are obtained by dividing one wavefront (Young's double slit, Fresnel biprism) or by dividing the amplitude (thin films) of a single source, so that the phase relation is locked.
  • At a point where the path difference between the two waves is delta: delta = n lambda (n = 0, 1, 2, ...) gives a maximum; delta = (2n + 1) lambda / 2 gives a minimum. In terms of phase difference phi = (2 pi / lambda) x delta: maxima at phi = 2 n pi, minima at phi = (2n + 1) pi.
  • Intensity distribution (in words): if the two waves have amplitudes a1 and a2, the resultant intensity is maximum, Imax proportional to (a1 + a2)^2, where the waves are in phase, and minimum, Imin proportional to (a1 - a2)^2, where they are in opposite phase. For two equal slits (a1 = a2 = a), Imax = 4 I0 and Imin = 0, where I0 is the intensity from one slit alone — the bright fringes are four times as bright as one slit alone, and the dark fringes are perfectly dark. Between a maximum and the next minimum the intensity varies smoothly as I = I0 cos^2 (phi / 2)-type curve, so the fringes have a gradual, sinusoidal profile, not sharp edges.

4. Young's Double-Slit Experiment (YDSE)



  • A single narrow slit is illuminated by monochromatic light, and the light from it falls on two narrow slits S1 and S2 separated by a small distance d. The two slits act as coherent sources. On a screen placed at a distance D (D much greater than d), alternate bright and dark fringes of equal width are obtained, parallel to the slits.
  • The fringe width (distance between two consecutive bright, or two consecutive dark, fringes) is beta = lambda D / d. The angular fringe width is theta = lambda / d — it does not depend on D: moving the screen away increases beta but keeps the angular separation the same.
  • The position of the nth bright fringe from the centre is x(n) = n lambda D / d (n = 0, 1, 2, ...), and of the nth dark fringe is x(n) = (2n - 1) lambda D / (2d) (n = 1, 2, ...). The central fringe (n = 0) is bright because the path difference there is zero.
  • Beta is proportional to lambda: red light gives wider fringes than blue light. In a fixed length of screen, the number of fringes is proportional to 1 / lambda — changing from 600 nm to 400 nm increases the count in the same region by the factor 600/400.
  • Slab insertion: if a transparent slab of thickness t and refractive index mu is placed in front of one slit, the optical path of that beam increases by (mu - 1) t. The whole pattern shifts towards the side of the slab by delta x = (mu - 1) t D / d, i.e. by N = (mu - 1) t / lambda fringe widths. The fringe width itself does not change. The central (zero path-difference) fringe moves to the position formerly occupied by the Nth fringe on that side.
  • Whole apparatus immersed in a medium: the wavelength in the medium is lambda / mu, so the fringe width becomes beta' = beta / mu — fringes become narrower in water (mu = 4/3 gives beta' = 3 beta / 4). The same shrinking applies to the angular width of diffraction minima.
  • White light: the central fringe is white and bright (zero path difference for all colours), flanked by a few coloured fringes (violet nearest the centre, red farthest within each order, since beta grows with lambda); beyond a few orders the colours overlap and the screen looks uniformly white.
  • One slit covered: interference disappears completely; only the single-slit diffraction pattern of the open slit remains. One slit made wider: the fringes remain at the same positions but the minima are no longer perfectly dark (unequal amplitudes), so the contrast (visibility) of the fringes decreases.

5. Diffraction at a Single Slit

  • Diffraction is the bending of light around the corners of an obstacle or aperture and its spreading into the region of the geometrical shadow. It becomes prominent when the size of the aperture or obstacle is comparable to the wavelength of light; for everyday objects (much larger than lambda) the bending is too small to notice.
  • When a plane wavefront falls on a single slit of width a, every point of the slit acts as a source of secondary wavelets (Huygens). The pattern on a distant screen (Fraunhofer diffraction) has a bright central maximum flanked by much weaker secondary maxima separated by minima.
  • The minima are at a sin theta = n lambda (n = 1, 2, 3, ...) — note this is the opposite condition to the interference maxima formula, a frequent source of confusion. The secondary maxima lie approximately midway, at a sin theta = (2n + 1) lambda / 2, and their intensity falls off very rapidly (the first secondary maximum is only about 4.5 percent of the central maximum).
  • Width of the central maximum: angular width = 2 lambda / a; on a screen at distance D (or with a lens of focal length f), the linear width is 2 lambda D / a (or 2 lambda f / a). The central maximum is twice as wide as each secondary maximum. A narrower slit gives a wider central maximum — the smaller the aperture, the stronger the spreading.
  • The central maximum's width depends on lambda: it is wider for red light than for blue light, and in a medium the wavelength shrinks to lambda / mu, so the whole diffraction pattern contracts.
FeatureInterference (double slit)Diffraction (single slit)
FormationSuperposition of waves from two separate coherent sourcesSuperposition of wavelets from different parts of the same wavefront
Fringe widthAll fringes of equal width (beta = lambda D / d)Central maximum twice the width of the others; secondary maxima shrink outwards
IntensityAll bright fringes have (nearly) the same intensityIntensity falls rapidly away from the central maximum
Dark fringesPerfectly dark (for equal slits)Minima are dark but secondary maxima are faint, not zero

6. Resolving Power of Optical Instruments

  • Because of diffraction at the aperture, the image of a point object is not a point but a diffraction pattern (a central disc surrounded by rings). Two close point objects give overlapping patterns and may not be seen as separate — this sets the limit of resolution of every optical instrument.
  • Rayleigh criterion: two point sources are said to be just resolved when the central maximum of the diffraction pattern of one falls on the first minimum of the diffraction pattern of the other. Closer than this, they appear as one.
  • Telescope: the limit of resolution (minimum angular separation of two distant objects that can just be resolved) is theta = 1.22 lambda / D, where D is the diameter of the objective. The resolving power is the reciprocal, RP = D / (1.22 lambda): it increases with a larger objective and with shorter wavelength. A large objective also gathers more light, making the image brighter — both reasons why astronomical telescopes have big objectives.
  • Microscope: the minimum distance between two close points that can just be resolved is d = 1.22 lambda / (2 mu sin theta), where theta is the half-angle of the cone of light entering the objective from the object and mu is the refractive index of the medium between the object and the objective. The resolving power = 1 / d = 2 mu sin theta / (1.22 lambda). It is increased by (i) using light of shorter wavelength (blue, or ultraviolet with special optics), (ii) increasing mu sin theta (numerical aperture) — for example by an oil-immersion objective, where oil of refractive index close to glass fills the gap.
  • Magnifying an image beyond the resolution limit gives empty magnification — a bigger but not more detailed image. Resolution, not magnification, decides how much detail an instrument can show.

7. Polarisation

  • Light is a transverse wave: in an electromagnetic wave the electric field E vibrates perpendicular to the direction of propagation. In unpolarised light (ordinary sunlight, lamp light) the E-vibrations occur in all directions in the plane perpendicular to propagation, changing randomly. In plane-polarised (linearly polarised) light the E-vibrations are confined to one direction in that plane. Only transverse waves can be polarised — polarisation is the conclusive proof that light is a transverse wave.
  • Polarisation by reflection — Brewster's law: when unpolarised light is reflected from a transparent surface (like glass or water), the reflected light is partially polarised. At one special angle of incidence, the polarising angle or Brewster's angle ip, the reflected light is completely plane-polarised (E perpendicular to the plane of incidence). Brewster's law: tan ip = mu2 / mu1 (for incidence from air on a medium of refractive index mu, tan ip = mu). Since mu is greater than 1, ip is always greater than 45 degree and less than 90 degree (for glass, mu = 1.5, ip is about 57 degree; for mu = 1.73, ip = 60 degree).
  • At Brewster's angle the reflected and refracted rays are perpendicular to each other: ip + r = 90 degree. The refracted light at this angle is only partially polarised, never completely.
  • Malus law: when plane-polarised light of intensity I0 falls on an analyser (a second polaroid) whose transmission axis makes an angle theta with the polarisation direction of the light, the transmitted intensity is I = I0 cos^2 theta. Maximum (I = I0) at theta = 0 degree, zero at theta = 90 degree — two crossed polaroids pass no light. Unpolarised light through a single polaroid loses exactly half its intensity (the cos^2 factor averages to 1/2), whatever the orientation of the polaroid.
  • Polaroids are thin films containing long-chain molecules aligned in one direction; they transmit only the E-component parallel to their axis (dichroism). A polaroid used to produce polarised light is a polariser; one used to test it is an analyser. Rotating the analyser and watching the intensity go to zero twice per rotation is the standard test of plane polarisation.
  • Uses of polarised light and polaroids: polaroid sunglasses and camera filters cut out glare (reflected light from roads and water is largely polarised horizontally); polarisation is used in 3D cinema glasses (two images in two perpendicular polarisations), in studying optical activity and measuring sugar concentration (saccharimeter), in detecting internal stresses in transparent materials (photoelasticity), and in LCD screens.

8. Doppler Effect for Light

  • When a light source moves relative to the observer, the observed wavelength changes: a source receding (moving away) gives light of longer wavelength — a shift towards the red end, called redshift; a source approaching gives shorter wavelength — a blueshift.
  • For speeds v much smaller than c, the shift is delta lambda / lambda = v / c (the fractional shift is often denoted by z). So the recession speed can be measured directly from a known spectral line: v = c x delta lambda / lambda. Example: a line of 600 nm received at 606 nm has delta lambda / lambda = 6/600 = 1/100, giving v = c/100 = 3 x 10^6 m/s.
  • Unlike sound, light needs no medium, and the shift depends only on the relative motion of source and observer along the line of sight. Light from most distant galaxies is redshifted, which is taken as evidence that the galaxies are receding and the universe is expanding.
  • At speeds comparable to c the simple formula is replaced by the relativistic Doppler formula, but for the speeds met in this course (v much smaller than c) delta lambda / lambda = v / c is sufficient. The sign convention: delta lambda positive (wavelength increased) means recession; negative means approach.

9. Formula Summary

QuantityFormulaReminder
Speed and wavelength in a mediumv = c / mu; lambda(medium) = lambda / muFrequency unchanged on refraction
Snell's law (Huygens)sin i / sin r = v1 / v2 = mu2 / mu1Wave proof of refraction
Path difference for maxima / miniman lambda / (2n + 1) lambda / 2n = 0, 1, 2, ...
Fringe width (YDSE)beta = lambda D / dAngular width lambda / d, independent of D
Slab shiftN = (mu - 1) t / lambda fringesShift towards the slab; beta unchanged
Single-slit minimaa sin theta = n lambdaOpposite condition to interference maxima
Central maximum width2 lambda / a (angular); 2 lambda D / a (linear)Twice the width of a secondary maximum
Telescope resolution limittheta = 1.22 lambda / DRP = D / (1.22 lambda)
Microscope resolution limitd = 1.22 lambda / (2 mu sin theta)RP grows with mu sin theta, falls with lambda
Brewster's lawtan ip = muAt ip, ip + r = 90 degree
Malus lawI = I0 cos^2 thetaUnpolarised light through one polaroid: I0 / 2
Doppler shift (light, v much less than c)delta lambda / lambda = v / cReceding: redshift; approaching: blueshift

10. Important Facts — One-Liners (for last-minute revision)

1. Wavefront: the surface of constant phase; rays are perpendicular to it. Point source gives a spherical wavefront, a line source a cylindrical one, and a distant source effectively a plane wavefront.

2. Huygens principle: every point on a wavefront is a source of secondary wavelets; their forward envelope is the new wavefront. The backward wavelet has zero amplitude.

3. Refraction proof: sin i / sin r = v1 / v2 (Snell's law). Frequency never changes on refraction; wavelength becomes lambda / mu and speed c / mu in a medium.

4. Reflection proof: the Huygens construction on a plane mirror gives angle of incidence = angle of reflection; speed, wavelength and frequency are unchanged in reflection.

5. Coherence: sustained interference needs the same frequency and a constant phase difference. Two independent sources are never coherent.

6. Maxima and minima: path difference n lambda gives a maximum, (2n + 1) lambda / 2 gives a minimum.

7. Equal slits: Imax = 4 I0, Imin = 0 — bright fringes are four times one slit's intensity, dark fringes perfectly dark.

8. Fringe width: beta = lambda D / d. It grows with lambda and D, and shrinks as d grows. Angular width lambda / d does not depend on D.

9. Slab in one beam: the pattern shifts by (mu - 1) t / lambda fringes towards the slab; the fringe width is unchanged.

10. Apparatus in water: lambda becomes lambda / mu, so fringe width and diffraction widths shrink by the factor mu.

11. White light in YDSE: central fringe white and bright, a few coloured fringes on either side (violet innermost), then uniform white.

12. One slit covered: no interference at all — only the single-slit diffraction pattern of the open slit remains.

13. Single-slit minima: a sin theta = n lambda. Note: this is the maxima-type formula of interference used for minima here.

14. Central maximum: angular width 2 lambda / a, linear width 2 lambda D / a — twice as wide as any secondary maximum; narrower slit, wider maximum.

15. Secondary maxima lie near a sin theta = (2n + 1) lambda / 2 and fade rapidly; the first is only about 4.5 percent as intense as the central maximum.

16. Rayleigh criterion: just resolved when the central maximum of one pattern falls on the first minimum of the other.

17. Telescope: resolution limit theta = 1.22 lambda / D; resolving power D / (1.22 lambda) — bigger objective, better resolution and brighter image.

18. Microscope: resolving power = 2 mu sin theta / (1.22 lambda) — shorter wavelength and oil immersion (larger mu sin theta) improve it.

19. Polarisation proves light is a transverse wave. Unpolarised light has E-vibrations in all transverse directions; plane-polarised light has them in one direction only.

20. Brewster's law: tan ip = mu; ip always lies between 45 degree and 90 degree; at ip the reflected light is completely polarised and ip + r = 90 degree.

21. At Brewster's angle the refracted light is only partially polarised — never completely.

22. Malus law: I = I0 cos^2 theta. Crossed polaroids (theta = 90 degree) transmit nothing; one polaroid always halves unpolarised light.

23. Polaroid uses: glare-free sunglasses and filters, 3D glasses, saccharimeter (optical activity), stress detection in transparent materials, LCD screens.

24. Doppler effect (light): delta lambda / lambda = v / c for v much less than c. Receding source — redshift; approaching source — blueshift. Galactic redshifts indicate an expanding universe.

11. Common Mistakes — Watch Out

1. Mixing up the two a sin theta formulas: single-slit minima obey a sin theta = n lambda, while double-slit maxima obey d sin theta = n lambda. Writing the interference condition for diffraction minima (or the reverse) is the most common error in this chapter.

2. Thinking fringe width changes when a slab is inserted: the slab only shifts the whole pattern by (mu - 1) t / lambda fringes; beta = lambda D / d is unchanged because lambda, D and d are unchanged.

3. Forgetting that wavelength changes in a medium: in water every width (fringe width, central maximum width, angular widths) shrinks by the factor mu, because lambda becomes lambda / mu. Using the vacuum wavelength inside a medium gives wrong answers.

4. Believing angular fringe width depends on screen distance: angular width = lambda / d is fixed by the slits alone. Moving the screen changes only the linear width beta = (lambda / d) x D.

5. Malus law applied to unpolarised light directly: I = I0 cos^2 theta applies only to light that is already plane-polarised with intensity I0. Unpolarised light must first be halved at the polariser (I0 / 2), and only then does Malus law apply at the analyser.

6. Claiming the refracted ray is completely polarised at Brewster's angle: only the reflected ray is completely polarised; the refracted ray is partially polarised. Also, at Brewster's angle the reflected and refracted rays are perpendicular (ip + r = 90 degree), not parallel.

7. Brewster angle outside its range: tan ip = mu with mu greater than 1 forces 45 degree < ip < 90 degree. An answer like ip = 30 degree for glass is impossible.

8. Confusing resolving power with magnifying power: a bigger image is not a better-resolved image. Resolving power is set by lambda and the aperture (D for a telescope, mu sin theta for a microscope) — not by the eyepiece.

9. Dropping the 1.22 factor: the telescope limit is 1.22 lambda / D, not lambda / D; the factor comes from the circular aperture. Similarly the microscope limit carries 1.22 in d = 1.22 lambda / (2 mu sin theta).

10. Central maximum width taken as lambda D / a: that is only the distance from the centre to the first minimum (the half-width). The full width of the central maximum is 2 lambda D / a.

11. Expecting all diffraction maxima to be equally bright: unlike interference fringes, diffraction secondary maxima fade very fast — the first is only about 4.5 percent of the central maximum, the next about 1.6 percent.

12. Doppler sign errors for light: a receding source always gives a longer received wavelength (redshift) and an approaching source a shorter one (blueshift). Also, for light the shift depends on relative motion only — there is no medium, so do not use the sound-wave formulas with wind or medium terms.

Next step: after these notes, take the 30-question Objective Quiz of this chapter — including previous years' questions, with an explanation for every question.

एक टिप्पणी भेजें (0)
और नया पुराने