Waves — Complete Notes
Subject: Physics • Class: 11 • Unit: Waves
Place in the exam pattern: Questions from this chapter are mostly numerical and formula-based — the wave equation and its readings, speed of a wave on a string, speed of sound and its dependence on temperature, beats, harmonics of strings and organ pipes, the resonance tube, and the Doppler effect are the most frequently asked parts. Every formula below must be practised with numbers, not just read.
A wave is a disturbance that travels through a medium (or space) carrying energy and momentum, without any net transport of matter. In a mechanical wave the particles of the medium oscillate about their mean positions and hand the disturbance on to their neighbours. This chapter builds the complete description of such waves: how a wave is written mathematically, how fast it travels in strings and in fluids, what happens when two waves meet, and how the motion of the source or the observer changes the frequency received.
1. Types of Waves — Transverse and Longitudinal
- Transverse wave: the particles of the medium vibrate perpendicular to the direction of propagation. Peaks are called crests and valleys are called troughs. Examples: waves on a stretched string, waves on a water surface, and electromagnetic waves (light). A transverse wave needs a medium with shear elasticity, so it can travel through solids and along liquid surfaces, but not through gases.
- Longitudinal wave: the particles of the medium vibrate parallel to the direction of propagation, forming alternate compressions (regions of high pressure and density) and rarefactions (regions of low pressure and density). Example: sound waves in air and in every fluid. A longitudinal wave needs bulk elasticity, so it can travel through solids, liquids and gases.
- Sound is a mechanical, longitudinal wave: it needs a material medium and cannot travel through vacuum. Light is a non-mechanical (electromagnetic), transverse wave and needs no medium.
- In both types, every particle of the medium executes simple harmonic motion about its mean position; it is the phase that travels, not the particle.
2. Displacement Relation and Wave Parameters
- A harmonic progressive wave travelling in the +x direction is described by the displacement relation:
y(x, t) = A sin(kx - omega t + phi) — equivalently A sin(omega t - kx) for a wave in the +x direction with a suitable phase choice. For a wave travelling in the -x direction, the sign between the two terms becomes positive: y = A sin(kx + omega t).
- Amplitude (A): the maximum displacement of a particle from its mean position.
- Wavelength (lambda): the distance between two nearest particles vibrating in the same phase — for example, between two consecutive crests or two consecutive troughs (transverse), or between two consecutive compressions or two consecutive rarefactions (longitudinal).
- Period (T) and frequency (f): T is the time in which a particle completes one full vibration; f = 1/T is the number of vibrations per second, unit hertz (Hz). The frequency of a wave is decided by the source and does not change when the wave enters another medium.
- Angular frequency (omega): omega = 2 pi f = 2 pi / T, unit rad/s.
- Wave number (k): k = 2 pi / lambda, unit rad/m. It is the phase change per unit distance.
- Phase and phase difference: the quantity (kx - omega t + phi) is the phase. A path difference of lambda corresponds to a phase difference of 2 pi; in general, phase difference = (2 pi / lambda) x path difference. Points separated by lambda/2 are in opposite phase (phase difference pi).
- Wave speed: combining the above, v = f lambda = omega / k = lambda / T. The speed is a property of the medium (and its state), not of the source.
- When a wave passes from one medium to another, its frequency stays the same (set by the source), while its speed and wavelength change in the same ratio.
3. Speed of a Transverse Wave on a Stretched String
- The speed of a transverse wave on a stretched string is v = sqrt(T / mu), where T = tension in the string and mu = mass per unit length of the string (linear density), unit kg/m.
- The speed depends only on the tension and the linear density — not on the frequency or amplitude of the wave. Doubling the tension multiplies the speed by sqrt(2); quadrupling mu (at the same tension) halves the speed.
- For a string of density rho and cross-sectional area A, mu = rho A. For a wire of radius r, mu = rho pi r^2.
4. Speed of Waves in Fluids; Speed of Sound (Newton–Laplace)
- The speed of a longitudinal wave in a fluid is v = sqrt(B / rho), where B is the bulk modulus of the fluid and rho its density. In general, wave speed in a medium has the form sqrt(elastic property / inertial property).
- Newton's formula: Newton assumed that the compressions and rarefactions of a sound wave take place isothermally (at constant temperature), for which B = P (the pressure). This gives v = sqrt(P / rho), which for air at 0 °C comes to about 280 m/s — too low compared with the measured value of about 332 m/s.
- Laplace's correction: the compressions and rarefactions in a sound wave are so rapid that there is no time for heat exchange; the process is adiabatic, for which B = gamma P, where gamma = Cp/Cv. The corrected formula is v = sqrt(gamma P / rho), which agrees with experiment. The Laplace value is sqrt(gamma) = sqrt(1.4) = 1.18 times the Newton value for air.
- For air at 0 °C (273 K), the speed of sound is about 332 m/s; in water it is about 1480 m/s, and in steel about 5000 m/s — sound travels fastest in solids, slower in liquids, slowest in gases.
5. Factors Affecting the Speed of Sound in a Gas
- Temperature: v is proportional to sqrt(T), where T is the absolute temperature. The speed increases by about 0.61 m/s for every 1 °C rise in temperature (near 0 °C). From 0 °C to 27 °C the speed rises from 332 m/s to about 348 m/s.
- Pressure: at constant temperature, the speed of sound is independent of pressure, because on increasing the pressure the density increases in the same proportion, keeping P/rho constant.
- Humidity: moist air is less dense than dry air at the same temperature and pressure (water vapour is lighter than the air it replaces), so sound travels faster in moist air than in dry air.
- Density of the gas: at the same temperature and pressure, v is proportional to 1/sqrt(rho). Sound travels about 4 times faster in hydrogen than in oxygen, because oxygen is 16 times denser than hydrogen.
- Wind: wind does not change the speed of sound relative to the air, but the effective speed relative to the ground becomes v + w downwind and v - w upwind, where w is the wind speed.
- The speed of sound does not depend on the frequency or amplitude of the sound (for ordinary intensities) — all frequencies travel together, which is why music from a distance is not distorted.
6. Principle of Superposition
- When two or more waves pass through the same region of a medium at the same time, the resultant displacement at any point is the vector sum of the displacements due to each wave separately: y = y1 + y2 + ... This is the principle of superposition. Each wave travels onwards undisturbed, as if the others were not present.
- Superposition of two waves of the same frequency travelling in the same direction gives a wave of the same frequency with amplitude A = sqrt(A1^2 + A2^2 + 2 A1 A2 cos phi), where phi is the phase difference. For phi = 0 (in phase), A = A1 + A2 (maximum); for phi = pi (opposite phase), A = |A1 - A2| (minimum). A steady interference pattern needs two waves of the same frequency with a constant phase difference.
- Superposition of two waves of equal amplitude and frequency travelling in opposite directions gives a standing wave (Section 7). Superposition of two waves of slightly different frequencies travelling in the same direction gives beats (Section 10).
7. Reflection of Waves and Standing Waves
- A wave is reflected at a boundary. At a rigid (fixed) boundary, the reflected wave suffers a phase change of pi (it is inverted — a crest returns as a trough), and the boundary point is a node. At a free boundary, there is no phase change on reflection, and the boundary point is an antinode.
- A standing (stationary) wave is formed when two waves of the same amplitude, frequency and speed travel in opposite directions and superpose. For example, y1 = A sin(kx - omega t) and y2 = A sin(kx + omega t) give y = 2A sin(kx) cos(omega t).
- In a standing wave, the amplitude varies from point to point but every particle vibrates with the same frequency and period. Points of zero amplitude are nodes; points of maximum amplitude (2A) are antinodes. All particles between two consecutive nodes vibrate in the same phase; particles on opposite sides of a node are in opposite phase.
- Distances: node to node = antinode to antinode = lambda/2; node to nearest antinode = lambda/4.
- Unlike a progressive wave, a standing wave does not transfer energy along the medium — energy only shuttles between kinetic and potential forms within each segment.
8. Standing Waves in Strings — Harmonics
- A string of length L fixed at both ends has nodes at both ends. The allowed wavelengths are lambda_n = 2L / n (n = 1, 2, 3, ...), and the allowed frequencies are f_n = n v / (2L) = n f1, where f1 = v/(2L) is the fundamental frequency (first harmonic).
- A string supports all harmonics: f1, 2f1, 3f1, ... The nth harmonic is also called the (n-1)th overtone: the first overtone is the second harmonic, the second overtone is the third harmonic, and so on.
- The fundamental frequency of a string is f1 = (1 / 2L) sqrt(T / mu) — it rises with tension, and falls with length and linear density (the basis of tuning a guitar or a sonometer).
| Mode | Frequency | Wavelength | Nodes on the string* | Name |
|---|---|---|---|---|
| n = 1 | f1 = v/2L | 2L | 2 (the two ends) | Fundamental / 1st harmonic |
| n = 2 | 2f1 | L | 3 | 2nd harmonic / 1st overtone |
| n = 3 | 3f1 | 2L/3 | 4 | 3rd harmonic / 2nd overtone |
| n = 4 | 4f1 | L/2 | 5 | 4th harmonic / 3rd overtone |
*Counting both end nodes.
9. Standing Waves in Organ Pipes — Open and Closed
- In an organ pipe, the air column vibrates longitudinally. At a closed end the air cannot move, so it is a displacement node (pressure antinode). At an open end the air is free to move, so it is a displacement antinode (pressure node).
- Closed pipe (one end closed): only odd harmonics occur. The allowed frequencies are f = (2n - 1) v / (4L) (n = 1, 2, 3, ...): f1 = v/(4L), 3f1, 5f1, ... The first overtone of a closed pipe is the third harmonic (3f1), the second overtone is the fifth harmonic (5f1). The fundamental wavelength is 4L.
- Open pipe (both ends open): all harmonics occur. The allowed frequencies are f = n v / (2L): f1 = v/(2L), 2f1, 3f1, ... The first overtone is the second harmonic, exactly as in a string. The fundamental wavelength is 2L.
- For pipes of the same length, the fundamental frequency of the open pipe is twice that of the closed pipe: f_open : f_closed = 2 : 1.
- End correction: the antinode at an open end actually forms a little outside the pipe, at a distance e = 0.3 d = 0.6 r from the end (d = diameter, r = radius of the pipe). The effective length of the air column is therefore L + e for each open end (L + 2e for an open pipe, L + e for a closed pipe). End correction matters in precise resonance-tube measurements.
| Feature | Closed pipe | Open pipe |
|---|---|---|
| Ends | One node, one antinode | Antinodes at both ends |
| Fundamental frequency | v / (4L) | v / (2L) |
| Fundamental wavelength | 4L | 2L |
| Harmonics present | Only odd: 1, 3, 5, ... | All: 1, 2, 3, 4, ... |
| First overtone | 3rd harmonic (3f1) | 2nd harmonic (2f1) |
| Second overtone | 5th harmonic (5f1) | 3rd harmonic (3f1) |
| End correction | L + e | L + 2e |
- Resonance tube: a tube closed at one end by water, whose level can be lowered. A vibrating tuning fork held over the open end produces a loud sound when the air column resonates. The first resonance occurs at L1 with L1 + e = lambda/4, and the second resonance at L2 with L2 + e = 3 lambda/4. Subtracting eliminates the end correction: lambda = 2 (L2 - L1), and then v = f lambda. The end correction itself is e = (L2 - 3 L1) / 2.
10. Beats
- Beats are the periodic rise and fall of loudness heard when two sound waves of slightly different frequencies superpose. The number of beats heard per second — the beat frequency — equals the difference of the two frequencies: f_beats = |f1 - f2|.
- Beats are used to tune instruments: the beats slow down and vanish when the two frequencies become equal. They are also used to find an unknown frequency: if a fork of known frequency f gives b beats per second with an unknown fork, the unknown frequency is f + b or f - b.
- The ambiguity between f + b and f - b is resolved by a small change whose effect on frequency is known: for example, loading a fork with wax lowers its frequency, while filing it raises its frequency; for a string, decreasing the tension lowers its frequency. If the beats increase after the change, the fork moved away from the known frequency; if they decrease, it moved closer.
11. Doppler Effect for Sound
- The Doppler effect is the apparent change in the frequency of a wave due to the relative motion of the source and the observer. For sound, the general formula (with all speeds measured relative to the air, and motion taken along the line joining source and observer) is:
f' = f x (v ± vo) / (v ∓ vs), where v = speed of sound, vo = speed of the observer, vs = speed of the source.
- Observer moving towards a stationary source: the observer meets more wavefronts per second: f' = f (v + vo) / v — frequency increases. Moving away: f' = f (v - vo) / v.
- Source moving towards a stationary observer: the wavelength in front of the source is shortened to lambda' = (v - vs)/f, so f' = f v / (v - vs) — frequency increases. Source moving away: f' = f v / (v + vs).
- Both moving towards each other: f' = f (v + vo) / (v - vs). Both moving apart: f' = f (v - vo) / (v + vs).
- The Doppler effect for sound is not symmetric: a source moving towards a stationary observer and an observer moving towards a stationary source at the same speed give different apparent frequencies, because in one case the wavelength in the medium changes and in the other it does not.
- The formulas above assume the speeds of source and observer are less than v. If a source moves faster than the speed of sound, it produces a shock wave (sonic boom) and the Doppler formula does not apply.
- With wind of speed w blowing from the source towards the observer, v is replaced by (v + w) everywhere in the formula.
- Note: the Doppler effect also occurs for light, but there the formula is relativistic and depends only on the relative speed of source and observer — that case belongs to a different chapter.
12. Important Facts — One-Liners (for last-minute revision)
1. Wave: a disturbance that carries energy without net transport of matter; in a mechanical wave the particles only oscillate about their mean positions.
2. Transverse wave: particles vibrate perpendicular to propagation; needs shear elasticity, so no transverse waves in gases. Longitudinal wave: particles vibrate parallel to propagation, as compressions and rarefactions; sound in air is longitudinal.
3. Wave equation: y = A sin(kx - omega t); read off A, omega = 2 pi f, and k = 2 pi / lambda directly from it.
4. Wave speed: v = f lambda = omega / k = lambda / T. Frequency is set by the source; speed is set by the medium.
5. On changing medium: frequency stays the same; speed and wavelength change together.
6. Phase: path difference lambda means phase difference 2 pi; lambda/2 means pi (opposite phase).
7. String wave speed: v = sqrt(T / mu); doubling T multiplies v by sqrt(2); quadrupling mu halves v.
8. Speed of sound (Laplace): v = sqrt(gamma P / rho); Newton missed the factor sqrt(gamma) = 1.18 for air by assuming isothermal changes.
9. Temperature: v proportional to sqrt(T in kelvin); about +0.61 m/s per °C rise near 0 °C.
10. Pressure: at constant temperature the speed of sound is independent of pressure, because P/rho does not change.
11. Humidity: sound is faster in moist air than in dry air, because moist air is less dense.
12. Density: v proportional to 1/sqrt(rho); sound is about 4 times faster in hydrogen than in oxygen.
13. Superposition: resultant displacement is the sum of individual displacements; each wave passes through the others undisturbed.
14. Reflection: at a rigid boundary the reflected wave changes phase by pi and the boundary is a node; at a free boundary there is no phase change and the boundary is an antinode.
15. Standing wave: y = 2A sin(kx) cos(omega t); nodes and antinodes are fixed; node to node = lambda/2, node to antinode = lambda/4; no net energy transfer.
16. String harmonics: f_n = n v/(2L) — all harmonics; the nth harmonic is the (n-1)th overtone.
17. Closed pipe: f = (2n-1) v/(4L) — only odd harmonics; first overtone = 3rd harmonic; fundamental wavelength 4L.
18. Open pipe: f = n v/(2L) — all harmonics; fundamental wavelength 2L; same length open pipe has twice the fundamental frequency of a closed pipe.
19. End correction: e = 0.3 d = 0.6 r per open end; effective length is L + e (closed pipe) or L + 2e (open pipe).
20. Resonance tube: first resonance L1 + e = lambda/4, second L2 + e = 3 lambda/4; lambda = 2(L2 - L1) eliminates e.
21. Beats: beat frequency = |f1 - f2|; beats vanish when the two frequencies become equal — the basis of tuning.
22. Doppler (sound): f' = f (v ± vo)/(v ∓ vs); use the upper signs when source and observer move towards each other. The effect is asymmetric for sound: moving source and moving observer give different results at the same speed.
13. Common Mistakes — Watch Out
1. Calling sound a transverse wave: sound in fluids is always longitudinal; only solids can carry transverse sound waves. In air, sound is longitudinal — compressions and rarefactions, not crests and troughs.
2. Changing the frequency at a boundary: when a wave enters a new medium, students often change f. The frequency is fixed by the source; only v and lambda change.
3. Reading the wave equation wrongly: in y = A sin(kx - omega t), the coefficient of x is k (not 1/lambda) and the coefficient of t is omega (not f). Get lambda = 2 pi/k and f = omega/(2 pi) from them.
4. Forgetting sqrt in the string formula: v = sqrt(T/mu), so doubling the tension does NOT double the speed — it multiplies it by sqrt(2).
5. Using Newton's formula for sound: v = sqrt(P/rho) is Newton's isothermal value and is about 16 percent too low for air; the correct Laplace formula has gamma inside: v = sqrt(gamma P/rho).
6. Making the speed of sound depend on pressure: at constant temperature, raising the pressure raises the density in the same ratio, so v is unchanged.
7. Reversing the humidity effect: moist air is lighter, not heavier — sound is faster on a humid day.
8. Counting overtones as harmonics: the first overtone is NOT the first harmonic. In a string or open pipe, first overtone = 2nd harmonic; in a closed pipe, first overtone = 3rd harmonic. Always convert overtones to harmonics before using a formula.
9. Giving a closed pipe even harmonics: a closed pipe has only odd harmonics (1, 3, 5, ...). Any answer with 2f1 or 4f1 for a closed pipe is wrong.
10. Mixing up pipe formulas: closed pipe fundamental is v/(4L) (wavelength 4L), open pipe fundamental is v/(2L) (wavelength 2L). Remember: the closed pipe fits only a quarter wavelength.
11. Ignoring end correction where it is asked: the antinode is not exactly at the open end; use L + e. But in the resonance tube, taking lambda = 2(L2 - L1) removes e automatically — do not apply the correction twice.
12. Doppler sign errors: decide the signs physically, not by memorising blindly — approach always raises the apparent frequency and recession always lowers it. Also, do not use the light (relativistic) Doppler formula for sound, and do not expect moving-source and moving-observer results to be equal.
Next step: after these notes, take the 30-question Objective Quiz of this chapter — including previous years' questions, with an explanation for every question.

