Work, Energy and Power — Complete Notes
Subject: Physics • Class: 11 • Unit: 4 — Work, Energy and Power
Place in the exam pattern: Questions come from this chapter every year — work by a variable force, the work–energy theorem, spring potential energy, power (including P = F.v), and elastic and inelastic collisions are the most frequently asked parts. Most questions are numerical, so every formula below must be practised with numbers, not just read.
Work, energy and power give a scalar way of solving mechanics problems without tracking the direction of every force at every instant. Work measures the energy transferred by a force, the work–energy theorem connects that transfer to the change in kinetic energy, and conservation of mechanical energy solves motion under gravity and springs in one line. Collisions are handled by combining momentum conservation with the energy behaviour of the collision. This chapter builds that complete toolkit.
1. Work Done by a Constant Force and by a Variable Force
- Work done by a constant force F when the point of application is displaced by s is: W = F s cos(theta), where theta is the angle between the force and the displacement. Unit: joule (J); 1 J = 1 N m. Work is a scalar — it has no direction, only a sign.
- Sign of work: theta < 90 degrees — work is positive (force helps the motion); theta = 90 degrees — work is zero (e.g. centripetal force, normal reaction on a surface, gravity on a body moving horizontally); theta > 90 degrees — work is negative (e.g. friction, a retarding force).
- Work done by a force acting on a body whose displacement is zero is zero, however large the force — holding a heavy load stationary does no mechanical work on it.
- Work by a variable force: for a force varying along a straight path, W = integral of F dx from the initial to the final position. For F = 20 + 10y (newton, y in metre), the work from y = 0 to y = 1 m is the integral of (20 + 10y) dy = 20 x 1 + 10 x (1/2) = 25 J.
- Area under the F–x curve: the work done equals the area under the force–displacement graph between the two positions (with sign — area below the x-axis counts negative). For a force rising linearly from 0 to 20 N over 5 m, the graph is a triangle, so W = (1/2) x 5 x 20 = 50 J. This area rule is the fastest method whenever a graph or a linear force is given.
- Work done by friction depends on the path and can be negative even on a closed path. If the friction coefficient itself varies with position, integrate: for mu_k(x) = mu_0 - alpha x with mu_k = 0 at x = L (so alpha = mu_0/L), the work of friction over 0 to L is -mu_0 M g L/2.
- Work done by gravity is path-independent: W = -m g (change in height) for a rise, +m g h for a fall through height h. Work done by a spring force is also path-independent (see Section 5).
2. Kinetic Energy
- The kinetic energy of a body of mass m moving with speed v is: K = (1/2) m v^2. Unit: joule. Kinetic energy is always positive (or zero) and depends on the frame of reference.
- Kinetic energy in terms of momentum: K = p^2 / (2m), so p = sqrt(2 m K). For equal momenta, the lighter body has the larger kinetic energy; for equal kinetic energies, the heavier body has the larger momentum.
- Doubling the speed makes the kinetic energy four times; doubling the mass at the same speed only doubles it.
- A rolling body (disc, sphere, cylinder) has both translational and rotational kinetic energy; the work needed to stop it equals its total kinetic energy.
3. The Work–Energy Theorem
- Statement: the work done by the net (resultant) force on a body equals the change in its kinetic energy: W_net = K_final - K_initial = (1/2) m v^2 - (1/2) m u^2. The theorem holds for constant and variable forces, in every frame of reference, and includes the work of friction.
- Work of an individual force: an object of kinetic energy 10 J displaced by (3 i) m under F = (-2 i + 3 j) N gains work W = F . s = (-2)(3) + (3)(0) = -6 J, so its final kinetic energy is 10 - 6 = 4 J. Only the component of force along the displacement does work.
- Braking and stopping: a constant retarding force F stops a body over distance s with F s = initial kinetic energy. For two cars of kinetic energies 100 J and 225 J stopping over 1000 m and 1500 m, F_A/F_B = (100/1000) / (225/1500) = 2/3.
- Penetration problems: with a constant resistive force in a block, v^2 falls linearly with penetration depth. A bullet entering at u and slowing to u/3 after 24 cm has used 1 - 1/9 = 8/9 of its kinetic energy in 24 cm, so the total stopping length is 24 x 9/8 = 27 cm.
- If several forces act, either add their works or first find the net force — both give the same W_net.
4. Potential Energy
- Potential energy is the energy stored by virtue of position or configuration, defined only for conservative forces (Section 6). Only changes in potential energy are physically meaningful; the reference (zero) level is chosen for convenience.
- Gravitational potential energy near the Earth's surface: U = m g h, where h is the height above the chosen reference level. Rising through h increases U by m g h; falling decreases it by the same amount, whatever the path.
- Work done by gravity = -(change in U): W_gravity = U_initial - U_final. This minus sign is the key link between work and potential energy for every conservative force: W_conservative = -delta U.
- Potential energy can be negative if the reference level is chosen above the body — this causes no difficulty, because only differences enter every calculation.
5. Potential Energy of a Spring
- A spring of force constant (stiffness) k exerts a restoring force F = -k x for an extension or compression x from the natural length. Unit of k: N/m.
- Spring potential energy: U = (1/2) k x^2. It depends on x^2, so stretching and compressing by the same amount store equal energy, and the energy is always positive.
- Scaling: doubling the stretch makes the stored energy four times — a spring stretched by 2 cm storing U stores 16 U when stretched by 8 cm, because (8/2)^2 = 16.
- Numerical check: for k = 200 N/m stretched by 0.1 m, U = (1/2) x 200 x (0.1)^2 = 1 J.
- Work done against the spring (by an external agent stretching it slowly) equals the stored (1/2) k x^2; work done by the spring force in going from x1 to x2 is (1/2) k x1^2 - (1/2) k x2^2.
- A different quantity, the elastic potential energy per unit volume of a stretched wire, (1/2) x stress x strain, belongs to the solids chapter — do not mix the two.
6. Conservative and Non-Conservative Forces
| Property | Conservative force | Non-conservative force |
|---|---|---|
| Examples | Gravity, spring force, electrostatic force | Friction, air resistance, viscous force, applied push/pull |
| Work on a closed path | Zero | Not zero (friction: negative) |
| Work between two points | Independent of path | Depends on the path taken |
| Potential energy | Can be defined | Cannot be defined |
| Mechanical energy | Conserved when only such forces do work | Changes — lost part appears as heat/sound |
- Test for a conservative force: work around any closed loop is zero, equivalently the work between two points is the same along every path.
- Friction is the standard non-conservative force in this chapter: its work is -f x (path length x matters, not just displacement), and the "lost" mechanical energy reappears as heat.
7. Conservation of Mechanical Energy; Vertical Circle
- Principle: if only conservative forces do work, the total mechanical energy E = K + U remains constant: K1 + U1 = K2 + U2. If friction also acts, E decreases by exactly the work done against friction: K1 + U1 = K2 + U2 + (work lost to friction).
- Free fall: a 1 kg body dropped from rest through 5 m (g = 10 m/s^2) reaches the ground with (1/2) m v^2 = m g h, so v = sqrt(2 g h) = 10 m/s — independent of mass and of the path (same result sliding down any smooth incline).
- Spring–mass exchange: a 0.5 kg block moving at 4 m/s compressing a spring of k = 200 N/m stops when (1/2) m v^2 = (1/2) k x^2, i.e. 4 J = 100 x^2, giving maximum compression x = 0.2 m.
- Rebound heights: a body falling from 10 m that loses 50 percent of its kinetic energy at the bounce keeps half its energy, so it rebounds to half the height, 5 m. In general the rebound height fraction equals the retained energy fraction.
- Vertical circle (basics): for a body completing a vertical circle of radius R, the minimum speed at the top is sqrt(g R) (tension just zero there), and the minimum speed at the bottom needed to complete the circle is sqrt(5 g R). Speed at the bottom and top are linked by energy conservation: v_bottom^2 = v_top^2 + 4 g R. The tension is greatest at the lowest point, so a whirled string or wire is most likely to break there.
8. Power
- Power is the rate of doing work. Average power: P_avg = W / t (total work divided by total time). Unit: watt (W); 1 W = 1 J/s. A machine doing 2000 J of work in 10 s has an average power of 200 W.
- Instantaneous power: P = F . v (dot product of force and velocity). Only the component of force along the velocity delivers power. For F = 10 N, v = 5 m/s at 60 degrees between them, P = 10 x 5 x cos 60 degrees = 25 W.
- Vector check: a particle with velocity (5 i - 3 j + 6 k) m/s under force (10 i + 10 j + 20 k) N has P = 50 - 30 + 120 = 140 W. A particle with displacement x = 2t - 1 has constant velocity v = dx/dt = 2 m/s, so under a 5 N force along the motion, P = 5 x 2 = 10 W at every instant.
- Motors and lifts: at constant speed the motor must work against gravity and friction. A 2000 kg lift rising at 1.5 m/s against a 3000 N friction force needs P = (2000 x 10 + 3000) x 1.5 = 34500 W.
- Turbines and efficiency: water falling at 15 kg/s from 60 m supplies input power m g h per second = 15 x 10 x 60 = 9000 W; with 10 percent frictional loss the output is 90 percent of this, 8.1 kW. Efficiency = useful output power / input power.
- Commercial energy unit: 1 kWh = 3.6 x 10^6 J — power (rate) must never be confused with energy (total).
9. Collisions
- A collision is an interaction in which bodies exert large impulsive forces on each other for a short time. In every collision (with no external impulse), linear momentum is conserved: m1 u1 + m2 u2 = m1 v1 + m2 v2. Kinetic energy may or may not be conserved — that is what classifies the collision.
- Elastic collision (1D): momentum and kinetic energy are both conserved. Final velocities: v1 = ((m1 - m2)/(m1 + m2)) u1 + (2 m2/(m1 + m2)) u2 and v2 = (2 m1/(m1 + m2)) u1 + ((m2 - m1)/(m1 + m2)) u2. The relative speed of approach equals the relative speed of separation.
- Equal masses in an elastic head-on collision simply exchange velocities. An equal-mass point mass striking a stationary pendulum bob elastically hands over its whole speed (10 m/s), so the bob rises by h = v^2/(2g) = 100/20 = 5 m.
- Energy transfer in an elastic collision is maximum when the masses are equal (M = m) — the incoming body can lose up to 100 percent of its kinetic energy. For a 4m body at speed u hitting a stationary 2m body elastically, v1 = ((4m - 2m)/6m) u = u/3, so it retains (1/3)^2 = 1/9 of its energy and the fraction lost is 8/9.
- Perfectly inelastic collision: the bodies stick together and move with the common velocity given by momentum conservation alone; kinetic energy loss is maximum for the given momentum change. Equal masses, one at rest: the common speed is half the incoming speed and exactly half the kinetic energy is lost. For equal masses with incoming speed v1 and common speed v2, v1 : v2 = 2 : 1.
- Inelastic (general): bodies separate after the collision but kinetic energy is not conserved (some is lost as heat, sound and deformation). Most real collisions are of this type.
- Collisions in two dimensions (concept): momentum is conserved separately along x and y. For an elastic collision of equal masses with the target initially at rest, the two bodies always move at 90 degrees to each other after the collision.
| Collision type | Momentum | Kinetic energy | Bodies after collision |
|---|---|---|---|
| Elastic | Conserved | Conserved | Separate |
| Inelastic | Conserved | Not conserved (decreases) | Separate |
| Perfectly inelastic | Conserved | Maximum possible loss | Stick together, one common velocity |
10. Coefficient of Restitution
- The coefficient of restitution (e) measures the elasticity of a collision: e = (relative speed of separation) / (relative speed of approach) along the line of impact.
- e = 1 for a perfectly elastic collision; e = 0 for a perfectly inelastic collision (bodies stick); real collisions have 0 < e < 1.
- Bouncing ball: for a ball dropped from height h1 and rebounding to height h2, e = sqrt(h2 / h1). Dropped from 25 m and rebounding to 16 m, e = sqrt(16/25) = 0.8. Each successive bounce height falls by the factor e^2.
- Restitution connects directly with energy: the fraction of kinetic energy retained in a bounce is e^2 (= h2/h1).
11. Important Facts — One-Liners (for last-minute revision)
1. Work: W = F s cos(theta); zero when force is perpendicular to displacement; unit joule.
2. Variable force: W = integral of F dx = area under the F–x graph (signed area).
3. Kinetic energy: K = (1/2) m v^2 = p^2/(2m); doubling speed quadruples K.
4. Work–energy theorem: net work = change in kinetic energy — valid for all forces, including friction.
5. Gravitational PE: U = m g h; work of gravity is path-independent, W = -delta U.
6. Spring PE: U = (1/2) k x^2; stretch x4 means energy x16.
7. Conservative forces: gravity, spring, electrostatic — closed-path work zero, PE definable.
8. Non-conservative: friction — path-dependent work, mechanical energy lost as heat.
9. Energy conservation: K + U constant when only conservative forces do work; subtract friction work otherwise.
10. Vertical circle: minimum top speed sqrt(g R); minimum bottom speed sqrt(5 g R); tension maximum at the bottom.
11. Average power: P = W/t. Instantaneous power: P = F . v.
12. Lift/motor power: P = (weight + friction) x speed at constant velocity.
13. Efficiency: output/input; 10 percent loss leaves 90 percent output (turbine: 9 kW in, 8.1 kW out).
14. Momentum is conserved in every collision; kinetic energy only in elastic collisions.
15. Elastic 1D formulas: v1 and v2 as in Section 9; approach speed = separation speed.
16. Equal masses, elastic: velocities are exchanged.
17. Maximum energy transfer in an elastic collision occurs at M = m.
18. Perfectly inelastic: bodies stick; common velocity from momentum alone; KE loss is maximum.
19. 2D elastic, equal masses, target at rest: outgoing directions are at 90 degrees to each other.
20. Restitution: e = separation speed / approach speed; e = 1 elastic, e = 0 perfectly inelastic.
21. Bouncing ball: e = sqrt(h_rebound / h_drop); retained energy fraction = e^2.
22. Braking: stopping distance s = K / F for a constant retarding force F.
23. Penetration: v^2 decreases linearly with depth under a constant resistive force.
24. Friction with varying mu: integrate mu(x) m g dx — the answer for mu falling linearly to zero over L is -mu_0 M g L/2.
12. Common Mistakes — Watch Out
1. Forgetting cos(theta): work is F s cos(theta), not F s. A force at 60 degrees to the displacement does only half of F s.
2. Work of centripetal/normal force: both are perpendicular to the motion at every instant, so their work is always zero — do not include them in energy sums.
3. Using the work–energy theorem with one force only: the theorem needs the net work of all forces; leaving out friction or gravity breaks it.
4. Spring PE with x in cm: convert the stretch to metres before using (1/2) k x^2, and remember the x^2 — doubling x quadruples the energy, it does not double it.
5. Sign of gravitational work: falling bodies gain kinetic energy (gravity does positive work, U decreases); rising bodies lose it. W_gravity = -delta U, not +delta U.
6. Assuming kinetic energy is conserved in every collision: only momentum is always conserved. In a sticking collision, compute the common velocity first, then the energy loss.
7. Elastic-collision formula mix-up: check the equal-mass limit (velocities exchange) and the heavy-wall limit (rebound with the same speed) before trusting a substituted answer.
8. Power versus energy: watt is a rate (J/s). "Power used in one hour" questions need energy = P x t; do not report joules as watts.
9. P = F.v without the angle: if force and velocity are not parallel, only F cos(theta) x v counts; perpendicular components deliver no power.
10. Motor power at constant speed: the motor works against friction plus gravity — omitting the friction term is the standard trap in lift problems.
11. Restitution from heights: e = sqrt(h2/h1), not h2/h1. The plain ratio h2/h1 is the retained energy fraction, which is e^2.
12. Vertical circle speeds: sqrt(g R) is the minimum at the top, sqrt(5 g R) the minimum at the bottom — swapping them is the most common error in this topic.
Next step: after these notes, take the 30-question Objective Quiz of this chapter — including previous years' questions, with an explanation for every question.
