Chemical Kinetics — Complete Notes
Subject: Chemistry • Class: 12 • Unit: Physical Chemistry
Place in the exam pattern: Questions come from this chapter every year — first-order calculations (half-life, time for 99% / 99.9% completion), order from initial-rate data and the Arrhenius equation are the most frequently asked parts. Most questions here are numerical, so learn every formula with its units.
Chemical kinetics is the branch of chemistry that studies the rate (speed) of chemical reactions and the factors affecting it. It tells us how fast a reaction proceeds, but not whether it is feasible (that is thermodynamics) and not how far it goes (that is equilibrium). The central quantities are the rate of reaction, the rate law, the order, the rate constant k and the activation energy Ea.
1. Rate of Reaction
The rate of reaction is the change in concentration of a reactant or a product in unit time.
Average rate = (Change in concentration) / (Time taken)
- In terms of a reactant R: Average rate = -Delta[R] / Delta t = -([R]2 - [R]1) / (t2 - t1)
- In terms of a product P: Average rate = +Delta[P] / Delta t
The minus sign for reactants only shows that their concentration decreases with time; the rate itself is always positive.
Instantaneous rate is the rate at a particular instant of time. It is the limit of the average rate when the time interval becomes very small:
- Instantaneous rate = -d[R]/dt (for a reactant) = +d[P]/dt (for a product)
- On a concentration vs time graph, the instantaneous rate at any point is the slope of the tangent at that point (for a reactant, the magnitude of the negative slope).
Units of rate: concentration / time = mol L-1 s-1 (also written M s-1). For gas-phase reactions, rate is sometimes expressed in atm s-1.
Rate and stoichiometry
For a balanced reaction aA + bB -> cC + dD, the rates of change of all species are linked through their stoichiometric coefficients. The rate of reaction is defined so that it is the same whichever species is measured:
Rate = -(1/a) d[A]/dt = -(1/b) d[B]/dt = +(1/c) d[C]/dt = +(1/d) d[D]/dt
Worked example 1: For N2 + 3H2 -> 2NH3, if H2 disappears at 0.06 mol L-1 s-1, find the rate of reaction and the rate of formation of NH3.
Rate = -(1/3) d[H2]/dt = (1/3)(0.06) = 0.02 mol L-1 s-1.
d[NH3]/dt = 2 x Rate = 2 x 0.02 = 0.04 mol L-1 s-1.
Factors affecting the rate
Rate increases with: higher concentration of reactants (more collisions), higher temperature, larger surface area of a solid reactant, presence of a catalyst, and (for photochemical reactions) light. Pressure matters for gaseous reactants because it changes their concentration.
2. Rate Law and Rate Constant
The rate law (rate equation) is the experimentally determined expression relating the rate to the concentrations of the reactants. For aA + bB -> products:
Rate = k [A]^x [B]^y
- k is the rate constant (velocity constant). It is equal to the rate when the concentration of each reactant is unity. For a given reaction, k depends only on temperature (and on the catalyst) — it does not change with concentration or time.
- x and y are the orders with respect to A and B. They are found experimentally; they need not equal the stoichiometric coefficients a and b.
- The exponents may be whole numbers, zero, or fractions (e.g. 1/2, 3/2, -1/2).
How order is found (initial-rate method): keep all concentrations fixed except one; the factor by which the rate changes when that concentration is multiplied gives the order in that reactant. If doubling [A] doubles the rate, the order in A is 1; if it makes the rate 4 times, the order in A is 2; if the rate is unchanged, the order in A is 0.
Worked example 2: Rate = k[A]^2[B]. If [A] is tripled at constant [B], the rate becomes 3^2 = 9 times. If both [A] and [B] are doubled, the rate becomes 2^2 x 2 = 8 times.
3. Order and Molecularity
Order of a reaction = sum of the powers of the concentration terms in the rate law: order = x + y for Rate = k[A]^x[B]^y. It is an experimental quantity.
Molecularity = number of molecules (atoms/ions) of reactants taking part in an elementary (single-step) reaction. It is a theoretical concept, defined only for an elementary step.
| Point | Order | Molecularity |
|---|---|---|
| Meaning | Sum of exponents in the rate law | Number of reactant molecules in an elementary step |
| How obtained | Experimentally, from rate data | Theoretically, from the mechanism (step) |
| Possible values | Zero, fraction, even negative | Only whole numbers: 1, 2, 3 (rarely more) |
| For a complex reaction | Defined for the overall reaction | Defined only for each step; overall molecularity has no meaning |
| Can it be zero? | Yes (zero-order reaction) | Never zero, never a fraction |
- Elementary steps are called unimolecular (one molecule, e.g. decomposition of N2O5 step), bimolecular (two molecules) or termolecular (three molecules; rare, because three-body collisions are improbable).
- For an elementary reaction, order = molecularity. For a complex (multi-step) reaction, the slowest step is the rate-determining step (RDS) and the observed order is governed by it.
4. Integrated Rate Equations
Integrated rate equations relate concentration directly to time. Only zero-order and first-order forms are in the syllabus.
4.1 Zero-order reactions (Rate = k)
Rate does not depend on concentration: -d[R]/dt = k.
Integrated form: [R] = [R]0 - k t, i.e. k = ([R]0 - [R]) / t
- A plot of [R] vs t is a straight line with slope = -k and intercept = [R]0.
- Units of k: same as rate = mol L-1 time-1.
- Examples: decomposition of NH3 on a hot platinum surface, decomposition of HI on a gold surface, many enzyme-catalysed and surface reactions (at high concentration the surface is fully covered, so rate becomes independent of concentration).
4.2 First-order reactions (Rate = k[R])
Integrated form: k = (2.303 / t) log([R]0 / [R])
Equivalently: log([R]0/[R]) = k t / 2.303, and [R] = [R]0 e^(-k t).
- A plot of log[R] vs t is a straight line with slope = -k / 2.303; a plot of log([R]0/[R]) vs t passes through the origin with slope = k / 2.303.
- Units of k: time-1 (s-1 or min-1) — independent of concentration units.
- All radioactive decays are first order; other examples: decomposition of N2O5, decomposition of H2O2, isomerisation reactions.
Worked example 3: A first-order reaction has k = 4.606 x 10^-3 s-1. Time to reduce 2.0 g of reactant to 0.2 g:
t = (2.303 / k) log(2.0 / 0.2) = (2.303 / 4.606 x 10^-3) x log 10 = 500 x 1 = 500 s.
Worked example 4 (very frequently asked): For a first-order reaction,
- Time for 99% completion: t99% = (2.303/k) log(100/1) = (2.303 x 2)/k = 4.606 / k. Since the time for 90% completion is (2.303/k) log 10 = 2.303/k, t99% = 2 x t90%.
- Also t99.9% = (2.303/k) log 1000 = 6.909/k, and t99% is about 6.64 x t1/2 (see Section 5).
5. Half-Life (t1/2)
The half-life is the time in which the concentration of a reactant falls to half of its initial value, i.e. [R] = [R]0 / 2.
Zero order
t1/2 = [R]0 / (2k) — half-life is directly proportional to the initial concentration. As the reaction proceeds, successive half-lives become shorter.
First order
t1/2 = 0.693 / k — half-life is independent of the initial concentration. This constancy of t1/2 is the signature test of a first-order reaction.
| Feature | Zero order | First order |
|---|---|---|
| Rate law | Rate = k | Rate = k[R] |
| Integrated equation | [R] = [R]0 - k t | k = (2.303/t) log([R]0/[R]) |
| Units of k | mol L-1 time-1 | time-1 |
| t1/2 | [R]0 / (2k), depends on [R]0 | 0.693 / k, independent of [R]0 |
| Straight-line plot | [R] vs t (slope -k) | log[R] vs t (slope -k/2.303) |
| Time for completion | Finite: [R]0 / k | Never fully complete in finite time (theoretical) |
Useful relations for first order (memorise):
- After n half-lives, fraction remaining = (1/2)^n.
- Time for 75% completion = 2 x t1/2 (two half-lives: 100 -> 50 -> 25 remaining).
- Time for 87.5% completion = 3 x t1/2; time for 99.9% completion is about 10 x t1/2 (since (1/2)^10 = 1/1024, about 0.1% remains).
Worked example 5: t1/2 of a first-order reaction is 1 minute. Time for 99.9% completion is about 10 x 1 = 10 minutes. (Exact: t = (2.303/k) log 1000 with k = 0.693 min-1 gives 9.97 min.)
Worked example 6: A zero-order reaction has [R]0 = 2.0 mol L-1 and k = 1.0 mol L-1 min-1 (for the reaction as written, rate of reaction = k). Time for 75% completion: amount reacted = 0.75 x 2.0 = 1.5 mol L-1, so t = 1.5 / 1.0 = 1.5 min when k refers to the disappearance of the reactant in A -> products form. Always check whether k is defined for the rate of reaction or for the disappearance of a reactant when stoichiometric coefficients are involved.
6. Pseudo First-Order Reactions
In some reactions the true order is higher, but one reactant is taken in large excess, so its concentration stays practically constant during the reaction. The rate then appears to depend on only one concentration, and the reaction behaves as first order — it is called a pseudo first-order reaction.
Rate = k [A][B]; if [B] is in large excess, [B] is constant, so Rate = k' [A] where k' = k[B] (observed constant).
Classic examples:
- Hydrolysis of ethyl acetate (CH3COOC2H5 + H2O -> CH3COOH + C2H5OH) in excess water: bimolecular in principle, pseudo first order in practice.
- Inversion of cane sugar (sucrose hydrolysis) in excess water, acid-catalysed.
7. Units of the Rate Constant k
General rule: for a reaction of overall order n, units of k = (mol L-1)^(1-n) x time-1 = (concentration)^(1-n) (time)^-1.
| Overall order | Units of k |
|---|---|
| 0 | mol L-1 s-1 |
| 1 | s-1 |
| 2 | L mol-1 s-1 |
| 3 | L^2 mol^-2 s-1 |
| n | (mol L-1)^(1-n) s-1 |
Exam tip: the units of k immediately reveal the order. k in s-1 means first order; k in L mol-1 s-1 means second order; k with the same units as rate means zero order.
8. Temperature Dependence — The Arrhenius Equation
Rate (and hence k) increases sharply with temperature. As a rough rule, the rate approximately doubles for every 10 K rise in temperature near room temperature; the ratio k(at T+10) / k(at T) is called the temperature coefficient (usually 2 to 3).
Arrhenius equation: k = A e^(-Ea / RT)
- A = frequency factor (pre-exponential factor); it measures the frequency of collisions in proper orientation and has the same units as k.
- Ea = activation energy — the minimum extra energy that reactant molecules must possess (over their average energy) so that their collisions can form products. Ea = Threshold energy - Average energy of the reactants.
- R = gas constant (8.314 J K-1 mol-1), T = temperature in kelvin.
Logarithmic forms (most used in numericals):
- log k = log A - Ea / (2.303 RT)
- A plot of log k vs 1/T (Arrhenius plot) is a straight line with slope = -Ea / (2.303 R) and intercept = log A. For a ln k vs 1/T plot, slope = -Ea / R.
- Two-temperature form: log(k2 / k1) = (Ea / 2.303 R) x [(T2 - T1) / (T1 T2)]
Why does rate rise with temperature? Only a small fraction of molecules have energy equal to or greater than Ea. Raising the temperature increases this fraction of effective molecules sharply (Maxwell-Boltzmann distribution shifts), and also increases collision frequency slightly. The main effect is the larger fraction crossing the energy barrier.
Worked example 7: Slope of the ln k vs 1/T plot is -5 x 10^3 K. Ea = -slope x R = 5 x 10^3 x 8.314 = 41,570 J mol-1 = 41.5 kJ mol-1.
Worked example 8: Rate constants at 500 K and 700 K are 0.04 s-1 and 0.14 s-1. Find Ea (log 3.5 = 0.5441, R = 8.31 J K-1 mol-1).
log(k2/k1) = log(0.14/0.04) = log 3.5 = 0.5441.
0.5441 = (Ea / (2.303 x 8.31)) x [(700 - 500) / (500 x 700)] = (Ea / 19.14) x (200 / 350000) = (Ea / 19.14) x (1/1750).
Ea = 0.5441 x 19.14 x 1750 = about 18,219 J mol-1 (18.2 kJ mol-1).
Worked example 9: The rate quadruples when temperature rises from 27 °C (300 K) to 57 °C (330 K). Find Ea (log 4 = 0.6021, R = 8.314).
log 4 = 0.6021 = (Ea / (2.303 x 8.314)) x [(330 - 300) / (300 x 330)] = (Ea / 19.147) x (1/3300).
Ea = 0.6021 x 19.147 x 3300 = about 38,040 J mol-1 = 38.04 kJ mol-1.
Activation energy can be calculated only if k is known at two different temperatures (or from the slope of the Arrhenius plot).
9. Effect of a Catalyst
A catalyst increases the rate of a reaction by providing an alternative path with a lower activation energy. More molecules can now cross the lower barrier, so the rate increases — for both the forward and the backward reaction equally.
Key facts about catalysts:
- A catalyst does not change the Gibbs energy change (Delta G), the enthalpy change (Delta H), the equilibrium constant, or the position of equilibrium; it only makes equilibrium arrive faster.
- A catalyst takes part in the reaction but is regenerated; a small quantity is usually enough.
- Homogeneous catalysis: catalyst in the same phase as the reactants (e.g. hydrolysis of sugar catalysed by H+ ions; decomposition of ozone in the presence of NO gas).
- Heterogeneous catalysis: catalyst in a different phase (e.g. combination of N2 and H2 to form NH3 in the presence of finely divided iron — the Haber process; oxidation of SO2 to SO3 over V2O5 or Pt).
- On an energy-profile diagram, the catalysed path has a lower peak (lower Ea) but the same starting and ending energy levels.
10. Collision Theory (in brief)
Collision theory treats reactants as hard spheres that must collide for a reaction to occur.
Rate = Z_AB x (fraction of collisions with energy >= Ea) x (orientation factor)
- Collision frequency (Z_AB): the number of collisions per second per unit volume between A and B molecules. It increases with concentration and (slightly) with temperature — increasing the concentration of reactants increases the collision frequency (it does not change Ea or the threshold energy).
- Only collisions in which the molecules possess energy equal to or greater than the threshold energy can be effective; this fraction is given by e^(-Ea / RT).
- Proper orientation (steric / probability factor, P): even energetic collisions fail if the molecules are not oriented correctly at the moment of impact (e.g. in the reaction forming a specific bond, the correct atoms must meet). So rate = P x Z_AB x e^(-Ea / RT).
- Comparing with Arrhenius, the frequency factor A corresponds to P x Z_AB.
- A collision that satisfies both conditions (enough energy and proper orientation) is an effective collision and leads to products, passing through a high-energy activated complex (transition state).
Limitations in brief: the theory treats molecules as hard spheres and ignores their structure, so it works well for simple gaseous reactions but is less exact for complex molecules.
11. Important Facts — One-Liners (for last-minute revision)
1. Rate of reaction = change in concentration per unit time; unit = mol L-1 s-1.
2. Instantaneous rate = -d[R]/dt for a reactant; it is the slope of the tangent to the concentration-time curve.
3. For aA + bB -> cC + dD: Rate = -(1/a)d[A]/dt = -(1/b)d[B]/dt = +(1/c)d[C]/dt = +(1/d)d[D]/dt.
4. Rate law is experimental; exponents (orders) need not match stoichiometric coefficients.
5. k is the rate when all concentrations are unity; k depends only on temperature (and catalyst), not on concentration.
6. Order = sum of exponents in the rate law; it can be zero, fractional or negative.
7. Molecularity is defined only for elementary steps and is never zero or fractional.
8. For an elementary reaction, order = molecularity; the slowest step of a mechanism is the rate-determining step.
9. Zero order: [R] = [R]0 - k t; [R] vs t plot is a straight line of slope -k; units of k = mol L-1 time-1.
10. First order: k = (2.303/t) log([R]0/[R]); log[R] vs t plot has slope -k/2.303; units of k = time-1.
11. First-order t1/2 = 0.693/k, independent of [R]0; zero-order t1/2 = [R]0/(2k), proportional to [R]0.
12. First order: t99% = 4.606/k = 2 x t90%; t99.9% is about 10 x t1/2; 75% completion takes 2 x t1/2.
13. After n half-lives (first order), the fraction remaining is (1/2)^n.
14. Hydrolysis of ethyl acetate and inversion of cane sugar (in excess water) are pseudo first-order reactions.
15. General units of k for order n: (mol L-1)^(1-n) time-1; k in L mol-1 s-1 means second order.
16. Arrhenius equation: k = A e^(-Ea/RT); A is the frequency factor and has the same units as k.
17. log k vs 1/T plot: slope = -Ea/(2.303 R); ln k vs 1/T plot: slope = -Ea/R.
18. Two-temperature form: log(k2/k1) = (Ea/2.303R) x [(T2 - T1)/(T1 T2)].
19. Ea = threshold energy - average energy of reactants; Ea is calculated from k at two temperatures.
20. Rate roughly doubles for every 10 K rise in temperature; the ratio is the temperature coefficient (about 2-3).
21. A catalyst works by lowering Ea; it does not change Delta G, Delta H or the equilibrium constant.
22. Haber process (finely divided Fe with N2 + H2 gases) is heterogeneous catalysis; sugar hydrolysis by H+ is homogeneous catalysis.
23. Increasing reactant concentration increases the collision frequency, not Ea or the threshold energy.
24. Effective collisions need energy >= threshold energy AND proper orientation; rate = P Z e^(-Ea/RT).
12. Common Mistakes — Watch Out
1. Order is not read from the balanced equation — stoichiometric coefficients equal the orders only for an elementary reaction. Order is always experimental.
2. Molecularity can never be zero or a fraction, and it has no meaning for the overall complex reaction — only for individual steps.
3. k changes with temperature, not with concentration. Doubling the concentration changes the rate, not k (at constant temperature).
4. First-order t1/2 does not depend on [R]0, but zero-order t1/2 does ([R]0/2k). Mixing these two is the most common error.
5. t99% is 4.606/k, not 2.303/k — 2.303/k is t90%. Remember: log(100/1) = 2, log(10/1) = 1.
6. In the two-temperature Arrhenius formula, use kelvin, and keep the order right: log(k2/k1) with (T2 - T1)/(T1 T2), where T2 > T1 gives k2 > k1 for a normal reaction.
7. Slope signs: log k vs 1/T slope is negative (-Ea/2.303R). A negative slope value in a problem gives a positive Ea.
8. A catalyst lowers Ea for both directions equally and does not shift equilibrium or change Delta H / Delta G — it only speeds up attainment of equilibrium.
9. Increasing concentration or temperature increases the rate, but Ea and threshold energy do not change with concentration; Ea changes only when the path changes (catalyst).
10. Units trap: for first order, k has units of time-1 only (no concentration unit). If k is given in L mol-1 s-1, the reaction is second order, not first.
11. In stoichiometric rate questions, divide by the coefficient: for 3H2 disappearing, rate of reaction = (1/3) x disappearance rate of H2, not the disappearance rate itself.
12. Pseudo first order is not truly first order — it is second order overall, but one reactant in excess makes its concentration constant (ester hydrolysis, sugar inversion).
13. For zero order, the reaction does complete in finite time ([R]0/k); for first order it theoretically never reaches exactly zero concentration.
Next step: after these notes, take the 30-question Objective Quiz of this chapter — including previous years' questions, with an explanation for every question.

