Thermodynamics (Physics) — Complete Notes
Subject: Physics • Class: 11 • Unit: Thermodynamics (Unit 8)
Place in the exam pattern: Questions come from this chapter almost every year — the first law and its sign convention, work done in isothermal and adiabatic processes, Cp and Cv with Mayer's relation, the Carnot engine and refrigerator COP are the most frequently asked parts. Most questions are numerical or statement-based, so every formula below must be practised with numbers, not just read. Note carefully: this is the Physics treatment of thermodynamics — heat, work and internal energy of a gas and its processes — not the enthalpy and bond-energy treatment used for chemical reactions.
Thermodynamics is the branch of physics that deals with heat, work, temperature and the interconversion of energy. It does not ask how fast a change happens; it only compares the initial and final equilibrium states of a system. A system is the part of the universe under study (here, usually a gas in a cylinder), the rest is the surroundings, and the wall between them is the boundary. A wall that allows heat to pass is diathermic; a wall that does not allow any heat exchange is adiabatic.
1. Thermal Equilibrium and the Zeroth Law
- Two systems are in thermal equilibrium with each other when there is no net flow of heat between them on being brought into thermal contact — which happens exactly when their temperatures are equal.
- Zeroth law of thermodynamics: if two systems A and B are each separately in thermal equilibrium with a third system C, then A and B are also in thermal equilibrium with each other.
- The zeroth law is what makes temperature a meaningful property and a thermometer possible: the thermometer is the third system C. Temperature is the property that decides the direction of heat flow — heat flows on its own from the higher-temperature body to the lower-temperature body.
- A system in thermal equilibrium with its surroundings, with no unbalanced forces and no chemical change pending, is in thermodynamic equilibrium. Only for such a state can its pressure, volume and temperature be assigned single definite values.
2. Thermodynamic State Variables and the Equation of State
- The state of a system in equilibrium is described by state variables (also called state functions): pressure P, volume V, temperature T, amount of substance n and internal energy U. A state variable depends only on the present state, not on the path by which the state was reached.
- Heat (Q) and work (W) are NOT state variables — they are modes of energy transfer across the boundary and depend on the path followed between two states. There is no "heat contained in a body"; a body contains internal energy, not heat or work.
- Extensive variables (U, V, n, total heat capacity) scale with the size of the system; intensive variables (P, T, density, specific heat) do not. The ratio of two extensive variables is intensive.
- Equation of state of an ideal gas: P V = n R T, where R = 8.3 J mol^-1 K^-1 is the universal gas constant. For a fixed mass of gas, P1 V1 / T1 = P2 V2 / T2 (temperature always in kelvin).
- A thermodynamic process is the path by which a system changes from one equilibrium state to another. A process carried out so slowly that the system stays infinitesimally close to equilibrium at every step is quasi-static; an idealised quasi-static process without any dissipative effects (friction, turbulence) is reversible.
3. Heat, Internal Energy and Work — the Distinction
- Internal energy (U) is the total energy stored inside the system: the sum of the kinetic energies of the molecules (translation, rotation, vibration) and the potential energy of intermolecular forces. For an ideal gas there are no intermolecular forces, so U depends only on temperature: U increases when T increases and is unchanged when T is unchanged.
- Heat (Q) is energy transferred between system and surroundings because of a temperature difference. It is not stored in the system; it exists only while crossing the boundary.
- Work (W) is energy transferred by a macroscopic force acting through a displacement — for a gas, the work of expansion or compression against the external pressure: for a small change, dW = P dV, so W = integral of P dV between the initial and final volumes. On a P–V diagram, the work done in a process is the area under the P–V curve.
- Heat and work are the two ways to change the internal energy of a system. The same change in U can be produced by heating alone, by work alone, or by any combination of the two — U is fixed by the end states, Q and W are not.
4. First Law of Thermodynamics and Sign Convention
- First law: the heat supplied to a system is used partly to increase its internal energy and partly to do work: Q = deltaU + W, that is, deltaU = Q - W.
- SIGN CONVENTION USED IN THESE NOTES (the Physics convention — learn it exactly):
- Q is positive when heat is supplied TO the system, negative when heat is released BY the system.
- W is positive when work is done BY the system (expansion, dV positive), negative when work is done ON the system (compression, dV negative).
- deltaU is positive when the internal energy (and for an ideal gas, the temperature) increases.
- WARNING — the opposite convention trap: in some treatments, W is defined as the work done ON the system and the first law is written deltaU = Q + W. Both are correct bookkeeping, but mixing the two mid-question is the single most common source of wrong answers in this chapter. In every question here, first ask: is the gas expanding (W positive, by the gas) or being compressed (W negative)?
- The first law is simply conservation of energy: energy can be transferred as heat or as work, but the total change is accounted for exactly by deltaU.
- For a cyclic process (the system returns to its starting state), deltaU = 0 over the full cycle, so net work done by the system = net heat absorbed: W_net = Q_net. On a P–V diagram, W_net is the area enclosed by the cycle — positive (work done by the system) if the cycle is traced clockwise, negative if anticlockwise.
5. Specific Heats Cp and Cv, and Mayer's Relation
- The molar specific heat (molar heat capacity) is the heat required to raise the temperature of 1 mole of a gas by 1 K. A gas has two important values because heating at constant volume and heating at constant pressure are different experiments.
- Cv (at constant volume): no expansion work is done (W = 0), so all the heat goes into internal energy: Q = n Cv deltaT = deltaU, giving deltaU = n Cv deltaT for ANY process of an ideal gas (because U depends only on T).
- Cp (at constant pressure): the gas expands and does work P deltaV = nR deltaT in addition to raising its internal energy, so more heat is needed: Cp is always greater than Cv.
- Mayer's relation: for 1 mole of an ideal gas, Cp - Cv = R. (For n moles, the total heat capacities differ by nR.)
- The ratio gamma = Cp / Cv is called the adiabatic exponent. Standard values: monatomic gas: Cv = (3/2) R, Cp = (5/2) R, gamma = 5/3 = 1.67; diatomic gas (rigid): Cv = (5/2) R, Cp = (7/2) R, gamma = 7/5 = 1.40; non-linear triatomic/polyatomic: gamma is smaller, about 4/3 = 1.33. Larger gamma means the gas is "stiffer" against adiabatic temperature change per unit work... precisely, for the same compression ratio an adiabatic change produces a bigger temperature change for larger gamma.
| Gas type | Cv (per mole) | Cp (per mole) | gamma = Cp/Cv |
|---|---|---|---|
| Monatomic (He, Ar) | (3/2) R | (5/2) R | 5/3 = 1.67 |
| Diatomic, rigid (H2, O2, N2 at ordinary temperatures) | (5/2) R | (7/2) R | 7/5 = 1.40 |
| Triatomic / polyatomic (e.g. CO2) | about 3 R or more | about 4 R or more | about 4/3 = 1.33 |
6. Thermodynamic Processes and Work Done in Each
| Process | What is held constant | Heat / energy relation | Work done by the gas |
|---|---|---|---|
| Isothermal | T constant (deltaU = 0 for ideal gas) | Q = W (all heat absorbed becomes work) | W = n R T ln(V2/V1) = 2.303 n R T log10(V2/V1) = n R T ln(P1/P2) |
| Adiabatic | Q = 0 (insulated, or too fast for heat exchange) | deltaU = -W (work is done at the cost of internal energy) | W = (P1 V1 - P2 V2) / (gamma - 1) = n R (T1 - T2) / (gamma - 1) = -n Cv (T2 - T1) |
| Isobaric | P constant | Q = n Cp deltaT; deltaU = n Cv deltaT | W = P (V2 - V1) = n R (T2 - T1) |
| Isochoric | V constant | Q = deltaU = n Cv deltaT | W = 0 |
| Cyclic | returns to initial state | deltaU = 0 over the cycle; Q_net = W_net | W_net = area enclosed on the P–V diagram |
- Isothermal process: carried out slowly in a conducting cylinder in contact with a reservoir. For an ideal gas, P V = constant (Boyle's law) along the process. Expansion: V2 > V1, W positive, and the gas must absorb exactly that much heat. In free expansion into vacuum (external pressure zero), W = 0 even though the volume changes; if it is also insulated, Q = 0 and deltaU = 0, so the temperature of an ideal gas does not change.
- Adiabatic process: the system is insulated (or the change is sudden, as in a tyre burst or sound waves). The equation of the process is P V^gamma = constant, equivalently T V^(gamma-1) = constant and T^gamma P^(1-gamma) = constant. Adiabatic expansion cools the gas (work comes out of internal energy); adiabatic compression heats it. The adiabatic curve on a P–V diagram is steeper than the isothermal curve through the same point, by a factor gamma in slope.
- Isobaric process: expansion or compression under a free piston at constant pressure. All three of Q, deltaU and W are generally non-zero; use Q = n Cp deltaT, deltaU = n Cv deltaT, W = n R deltaT and check that Q = deltaU + W.
- Isochoric process: rigid container. Pressure changes in proportion to temperature (P/T = constant). No work is possible, so heat supplied is a direct measure of deltaU — this is how Cv is defined and measured.
- Polytropic note (for safety): if a problem states P V^x = constant with x different from 1 and gamma, it is neither isothermal nor adiabatic; do not force the standard formulas on it.
7. Second Law of Thermodynamics
The first law forbids creating energy, but it does not forbid a process that converts heat completely into work — experience does. The second law states this limitation in two classic forms:
- Kelvin–Planck statement: No process is possible whose sole result is the absorption of heat from a reservoir and its complete conversion into work. A heat engine must always reject some heat to a colder reservoir; 100 percent efficiency is impossible.
- Clausius statement: No process is possible whose sole result is the transfer of heat from a colder body to a hotter body. Heat does not flow uphill by itself; a refrigerator needs external work to move heat from cold to hot.
- The two statements are equivalent: violating one would violate the other. Together they fix the direction of natural processes — heat flows from hot to cold, gases expand into vacuum and do not spontaneously gather back, and every real process carries some irreversibility.
8. Heat Engine and Its Efficiency
- A heat engine is a device that works in a cycle, absorbs heat Q1 from a hot reservoir (source) at temperature T1, converts part of it into work W, and rejects the remaining heat Q2 to a cold reservoir (sink) at temperature T2. A steam engine and a petrol/diesel engine are examples.
- By the first law over one cycle (deltaU = 0): W = Q1 - Q2.
- Efficiency: eta = W / Q1 = 1 - Q2 / Q1. Efficiency depends only on the fraction of heat rejected; eta = 1 would need Q2 = 0, which the Kelvin–Planck statement forbids.
- Temperatures in all engine and refrigerator formulas must be in kelvin. Using °C values in a ratio is a classic error (a difference T1 - T2 is the same in both scales, but a ratio T2/T1 is not).
9. Carnot Engine and Carnot Theorem
- The Carnot engine is an ideal, reversible engine working between two reservoirs through a cycle of four reversible steps: isothermal expansion at T1 (absorbing Q1), adiabatic expansion (temperature falls T1 to T2), isothermal compression at T2 (rejecting Q2), and adiabatic compression (temperature rises back to T1). The working substance is taken as an ideal gas in a cylinder with insulating walls and a conducting base that can be placed on the source, the sink, or an insulating stand.
- Carnot efficiency: eta = 1 - T2 / T1 (T in kelvin). It depends only on the two reservoir temperatures — not on the working substance, not on the size of the engine. Efficiency rises if T1 is raised or T2 is lowered.
- Carnot theorem: (i) no engine working between two given reservoirs can be more efficient than a reversible (Carnot) engine between the same reservoirs; (ii) all reversible engines between the same two reservoirs have the same efficiency, eta = 1 - T2/T1, whatever the working substance.
- A real engine is always less efficient than the Carnot limit because of friction, heat loss by conduction, and finite-speed (non-quasi-static) operation. The Carnot value is an upper bound, never an achieved figure for a real machine.
10. Refrigerator and Heat Pump — Coefficient of Performance
- A refrigerator is a heat engine run in reverse: external work W is supplied, heat Q2 is extracted from the cold body (the inside of the fridge, at T2) and heat Q1 = Q2 + W is rejected to the hot surroundings (at T1).
- For a refrigerator the useful effect is the heat removed from the cold body, so its performance is measured by the coefficient of performance (COP): COP (refrigerator) = Q2 / W = Q2 / (Q1 - Q2). For a reversible (Carnot) refrigerator, COP = T2 / (T1 - T2).
- A heat pump is the same machine used for heating a room: the useful effect is the heat Q1 delivered to the hot side, so COP (heat pump) = Q1 / W = T1 / (T1 - T2) for a reversible machine. The two COPs are related by COP (heat pump) = COP (refrigerator) + 1.
- COP is not an efficiency: it can be, and usually is, greater than 1 (a good refrigerator has COP of 2 to 6). Never write COP as a percentage. Note that COP of a refrigerator falls as the temperature difference T1 - T2 grows — a fridge works harder on a hotter day.
11. Reversibility and Irreversibility
- A process is reversible if it can be run backwards so that both the system and the surroundings are restored exactly to their initial states, with no other change anywhere. This requires the process to be quasi-static (infinitely slow, through a sequence of equilibrium states) and non-dissipative (no friction, no turbulence, no heat flow across a finite temperature difference, no free expansion).
- All natural processes are irreversible to some degree: friction, free expansion into vacuum, heat conduction from hot to cold, mixing — none of these undoes itself. A pendulum with friction, a gas rushing into an evacuated chamber, a hot cup cooling in a room: each can be reversed only by spending extra work from outside, which changes the surroundings.
- Reversible processes are an ideal limit, never fully attained, but they set the standard: the Carnot engine's efficiency and COP formulas hold only for reversible operation, and every real device falls short of them.
- Practical test in a question: if the process is described as sudden, free, with friction, or across a finite temperature gap, treat it as irreversible; if it is slow, quasi-static and frictionless, it may be treated as reversible.
12. Important Facts — One-Liners (for last-minute revision)
1. Zeroth law: A in equilibrium with C and B in equilibrium with C implies A in equilibrium with B — this law defines temperature.
2. State variables: P, V, T, n, U. Not state variables: heat Q and work W — they depend on the path.
3. Ideal-gas internal energy depends only on temperature: isothermal change of an ideal gas means deltaU = 0.
4. First law (Physics convention): deltaU = Q - W; Q positive into the system, W positive when done by the system.
5. Work in any process: W = area under the P–V curve; in a cycle, W_net = area enclosed (clockwise positive).
6. Isothermal work: W = 2.303 n R T log10(V2/V1); expansion absorbs heat equal to the work done.
7. Adiabatic condition: Q = 0 and P V^gamma = constant; adiabatic expansion cools, compression heats.
8. Free expansion into vacuum: W = 0 always (no external pressure); if insulated, deltaU = 0 and an ideal gas keeps its temperature.
9. Isobaric work: W = P deltaV = n R deltaT. Isochoric work: W = 0, so Q = deltaU = n Cv deltaT.
10. Adiabatic work: W = n R (T1 - T2) / (gamma - 1) — positive in expansion (T falls), negative in compression (T rises).
11. Mayer's relation: Cp - Cv = R per mole; Cp > Cv because at constant pressure part of the heat does expansion work.
12. Gamma values: monatomic 5/3 = 1.67; diatomic 7/5 = 1.40; polyatomic about 4/3 = 1.33.
13. deltaU for any process of an ideal gas: deltaU = n Cv deltaT — Cv is used even when the volume is not constant.
14. Cyclic process: deltaU = 0 over the cycle, so net work = net heat absorbed.
15. Kelvin–Planck: heat can never be converted completely into work in a cycle; some heat must be rejected.
16. Clausius: heat cannot by itself flow from a colder to a hotter body; a refrigerator needs work input.
17. Heat-engine efficiency: eta = W/Q1 = 1 - Q2/Q1 — always less than 1 for a real engine.
18. Carnot efficiency: eta = 1 - T2/T1, kelvin only; depends only on the reservoir temperatures (Carnot theorem).
19. Carnot cycle steps: isothermal expansion, adiabatic expansion, isothermal compression, adiabatic compression.
20. Refrigerator COP: Q2/W; Carnot value T2/(T1 - T2). Heat-pump COP = refrigerator COP + 1 = T1/(T1 - T2).
21. COP is not efficiency — it is normally greater than 1 and is never written as a percentage.
22. Reversible needs quasi-static + no dissipation; sudden / free / frictional processes are irreversible.
23. Adiabatic curve is steeper than the isothermal curve on a P–V diagram (slope gamma times larger).
24. In every engine/refrigerator formula, convert temperatures to kelvin first — ratios in °C are wrong.
13. Common Mistakes — Watch Out
1. Sign-convention mix-up (the biggest trap): Here W is work done BY the gas and deltaU = Q - W. If you use a formula from the convention where W is work done ON the gas (deltaU = Q + W) without flipping the sign of W, every numerical flips. Decide the convention before substituting, and remember: expansion means W positive here, compression means W negative.
2. Using °C in Carnot formulas: eta = 1 - T2/T1 and COP = T2/(T1 - T2) need kelvin. 327 °C is 600 K, not 327 K — this single slip ruins the most common exam numerical.
3. Thinking heat is stored in a body: a body has internal energy, not heat. Heat and work exist only during a transfer; they are path functions, not state variables.
4. deltaU = n Cv deltaT only at constant volume? No — for an ideal gas this gives deltaU in every process, because U depends only on T. What changes from process to process is how Q and W split.
5. Isothermal means Q = 0? No — isothermal means deltaT = 0 and deltaU = 0, so Q = W, generally non-zero. Q = 0 is the adiabatic condition. Swapping these two is a very common error.
6. Work in free expansion: expansion into vacuum does zero work however large the volume change, because the external pressure is zero. Do not apply nRT ln(V2/V1) — that formula needs a quasi-static expansion against pressure.
7. Forgetting that adiabatic expansion cools the gas: the work comes out of internal energy, so T must fall; if your calculation raises T in an adiabatic expansion, the sign of W is wrong.
8. Cp - Cv for n moles: Mayer's relation Cp - Cv = R is per mole. For n moles the difference of total heat capacities is nR. Also, Cp and Cv in a numerical must be in matching units (both per mole, or both total).
9. COP written as efficiency or percentage: COP of a refrigerator is Q2/W and is usually 2–6, i.e. "500 percent" if miswritten. Keep COP a plain number greater than 1, and do not cap it at 1.
10. Heat pump vs refrigerator COP: the heat pump's useful heat is Q1 (rejected to the room), the refrigerator's is Q2 (removed from the cold space). COP(heat pump) = COP(refrigerator) + 1 — using Q2 for a heat pump understates it by exactly 1.
11. Carnot efficiency depends on the working substance? It does not — only on T1 and T2 (Carnot theorem). Any option claiming a different efficiency for a different gas between the same reservoirs is wrong; and no real engine can beat the Carnot value.
12. Clockwise vs anticlockwise cycle: on a P–V diagram a clockwise cycle does net work by the gas (engine); anticlockwise means net work done on the gas (refrigerator). Reading the direction wrong flips the sign of W_net.
13. Log base in isothermal work: W = 2.303 nRT log10(V2/V1) uses log base 10 with the 2.303 factor; W = nRT ln(V2/V1) uses the natural log without it. Using 2.303 with ln (or log10 without 2.303) gives a wrong factor.
14. Assuming every slow process is reversible: slowness (quasi-static) is necessary but not sufficient — friction or heat flow across a finite temperature difference still makes the process irreversible.
Next step: after these notes, take the 30-question Objective Quiz of this chapter — including previous years' questions, with an explanation for every question.

