🎓 RAS • RPSC • NEET • SSC • RRB • Teaching परीक्षाओं की तैयारी
मुफ़्त Notes, Daily Current Affairs और Online Mock Tests — सब कुछ एक ही जगह
🩺 NEET (UG) Hub — Notes, Quiz और Mock Tests
Class 11-12 Chapter-wise Notes (Hindi + English), 30-Question Quiz और PYQ Mock Tests — बिल्कुल मुफ़्त
🌿 Biology 🧪 Chemistry ⚛ Physics 📝 NEET Mock Tests — Free

NEET Chemistry Notes: Hydrocarbons — Complete Notes

 


Hydrocarbons — Complete Notes

Subject: Chemistry • Class: 11 • Unit: Hydrocarbons

Place in the exam pattern: Questions come from this chapter every year — Wurtz reaction and its limits, decarboxylation, ethane conformations, Markovnikov rule and the peroxide effect, ozonolysis, acidic character of alkynes, and electrophilic substitution of benzene (nitration, Friedel-Crafts, directive influence) are the most frequently asked parts.

A hydrocarbon is a compound of carbon and hydrogen only. Hydrocarbons are the parent organic compounds: every other organic family is obtained by replacing one or more hydrogen atoms of a hydrocarbon by another atom or group. They are classified as saturated (alkanes, only single bonds), unsaturated (alkenes with C=C and alkynes with a triple bond) and aromatic (benzene and related ring compounds with delocalised pi electrons). Petroleum and natural gas are the main commercial sources. All reactions in these notes are written in plain text form, for example CH2=CH2 + HBr -> CH3-CH2Br.

1. Alkanes — Structure and Physical Properties

  • Alkanes have the general formula CnH2n+2. Every carbon is sp3 hybridised and tetrahedral (bond angle 109.5 degrees); all bonds are sigma bonds. The first members are methane CH4, ethane C2H6, propane C3H8 and butane C4H10. Free rotation is possible around a C-C single bond.
  • Alkanes are also called paraffins (Latin: parum affinis, little affinity) because they are almost unreactive towards acids, bases and oxidising agents under ordinary conditions — their C-C and C-H bonds are strong and non-polar.
  • Isomerism: alkanes show chain (structural) isomerism from butane onwards. Butane has 2 isomers (n-butane and isobutane, i.e. 2-methylpropane), pentane has 3 and hexane has 5.
  • Physical properties: C1-C4 are gases, C5-C17 are liquids and the higher members are solids. They are non-polar, insoluble in water but soluble in organic solvents. Boiling point rises with molecular mass (larger surface area, stronger van der Waals forces). Branching lowers the boiling point because the molecule becomes more spherical, surface area for contact decreases and the intermolecular forces weaken: n-pentane > isopentane (2-methylbutane) > neopentane (2,2-dimethylpropane). Melting points also rise with mass but less regularly.

2. Preparation of Alkanes

MethodPlain-text reactionKey point
Hydrogenation of alkenes/alkynesCH2=CH2 + H2 --(Ni, Pt or Pd)--> CH3-CH3Sabatier-Senderens reaction; finely divided Ni/Pt/Pd catalyst
Wurtz reactionCH3-Br + 2Na + Br-CH3 --(dry ether)--> CH3-CH3 + 2NaBrTwo alkyl halide molecules couple; product has an even number of carbons from one halide
Decarboxylation (soda lime)CH3COONa + NaOH --(CaO, heat)--> CH4 + Na2CO3Sodium salt of a carboxylic acid loses CO2; alkane has one carbon less than the acid
Kolbe electrolysis2 CH3COONa + 2 H2O --(electrolysis)--> CH3-CH3 + 2CO2 + H2 + 2NaOHAnode product is the alkane (ethane from sodium ethanoate)
Reduction of alkyl halidesCH3-CH2-Br + Zn/HCl (or H2/Pd) -> CH3-CH3Alkyl halide is reduced to the alkane
From Grignard reagentCH3MgBr + H2O -> CH4 + Mg(OH)BrAny compound with an active hydrogen (water, alcohol) gives the alkane
  • Wurtz reaction — limits: (i) methane cannot be prepared (the smallest product is ethane); (ii) alkanes with an odd number of carbons (for example n-heptane) cannot be made in good yield, because two different alkyl halides must be used and a mixture of three alkanes forms which is hard to separate; (iii) tertiary alkyl halides give mainly alkenes (elimination) instead of coupling.
  • Decarboxylation: soda lime is a mixture of NaOH and CaO. The reagent asked for in the reaction CH3CH2COONa --(heat, ?)--> CH3CH3 + Na2CO3 is CaO (as part of soda lime).

3. Chemical Properties of Alkanes

  • Free-radical halogenation: in sunlight (or UV light), chlorine and bromine replace hydrogen atoms one by one. Example: CH4 + Cl2 --(sunlight)--> CH3Cl + HCl, and further to CH2Cl2, CHCl3 and CCl4. The reaction proceeds by a free-radical chain mechanism: initiation (Cl2 splits into two Cl radicals), propagation (radical attacks methane, then CH3 radical attacks Cl2) and termination (two radicals combine). Reactivity of halogens: F2 > Cl2 > Br2 > I2; iodination is reversible and is carried out in the presence of an oxidising agent such as HNO3 or HIO3. Fluorination is too violent to control.
  • Combustion: alkanes burn completely in excess air to CO2 and water with a large amount of heat, which is why they are used as fuels: CH4 + 2O2 -> CO2 + 2H2O. Incomplete combustion (limited air) gives carbon monoxide or carbon (soot): 2CH4 + 3O2 -> 2CO + 4H2O.
  • Controlled oxidation: with special catalysts alkanes give useful products, for example methane with Cu tube at 523 K and 100 atm gives methanol, and with Mo2O3 gives methanal (formaldehyde).
  • Pyrolysis (cracking): higher alkanes on strong heating (about 773 K) break into lower alkanes, alkenes and hydrogen: for example hexane splits into lower fragments of the type C6H14 -> C2H6 + C4H8, and in practice dodecane gives heptane + pentene + other products. Cracking is used in the petroleum industry to make petrol-range hydrocarbons and ethene for polymers. Pyrolysis also proceeds through free radicals.
  • Aromatisation: n-alkanes with six or more carbons, heated to about 773 K at 10-20 atm in the presence of Cr2O3 (or V2O5, Mo2O3) supported on Al2O3, cyclise and dehydrogenate to benzene or its homologues: n-C6H14 --(Cr2O3/Al2O3, 773 K)--> C6H6 + 4H2. This is also called reforming.
  • Reaction with steam: CH4 + H2O --(Ni, 1273 K)--> CO + 3H2 (industrial source of hydrogen).

4. Conformations of Ethane

  • The different spatial arrangements of atoms produced by rotation about a single bond are called conformations (rotational isomers). Rotation about the C-C bond in ethane is almost free, but two extreme forms are important.
  • Sawhorse and Newman projections (in words): in a Newman projection we look along the C-C bond; the front carbon is a dot and the back carbon is a circle, with three C-H bonds shown at 120 degrees to each other on each carbon. In a sawhorse projection the C-C bond is drawn obliquely and the groups on both carbons are shown around it.
  • Eclipsed conformation: the hydrogen atoms of the two carbons are closest to each other (dihedral angle 0 degrees). Repulsion between the C-H bond electron pairs (torsional strain) is maximum, so this is the least stable conformer.
  • Staggered conformation: the hydrogen atoms are farthest apart (dihedral angle 60 degrees). Repulsions are minimum, so this is the most stable conformer.
  • The energy difference between the two forms is only about 12.5 kJ mol-1, so at room temperature the molecule rotates rapidly and the conformers cannot be separated. Dihedral (torsional) angle = the angle between two C-H bonds on adjacent carbons, viewed along the C-C bond.

5. Alkenes — Structure, Isomerism and Preparation

  • Alkenes have the general formula CnH2n and contain one C=C double bond (one sigma + one pi bond). The doubly bonded carbons are sp2 hybridised, trigonal planar, with bond angle about 120 degrees. The pi bond prevents free rotation, which gives rise to geometrical isomerism. Older name: olefins.
  • Geometrical (cis-trans) isomerism: each doubly bonded carbon must carry two different groups. In the cis form the similar groups are on the same side; in the trans form they are on opposite sides. Examples: but-2-ene exists as cis and trans forms; 3,4-dimethylhex-3-ene shows geometrical isomerism (each sp2 carbon carries a methyl and an ethyl group), whereas 2-methylprop-1-ene, pent-1-ene and 2,3-dimethylbut-2-ene do not (one carbon carries two identical groups or a =CH2 end). Cis isomers generally have higher boiling point (more polar) and lower melting point than the trans isomers; trans isomers are more symmetrical and often more stable.
  • Preparation of alkenes:

- From alkynes (partial reduction): see Section 7 — Lindlar catalyst gives the cis-alkene, Na in liquid NH3 gives the trans-alkene.

- By dehydrohalogenation of alkyl halides: CH3-CH2-CH2Br + alc. KOH --(heat)--> CH3-CH=CH2 + KBr + H2O. One molecule of HX is removed from adjacent carbons (beta-elimination). Where two alkenes are possible, the more substituted alkene is the major product (Saytzeff / Zaitsev rule) — for example 2-bromopentane gives pent-2-ene as the major product. The reaction of 2-bromopentane to pent-2-ene is therefore a beta-elimination, a dehydrohalogenation, and it follows the Zaitsev rule (it is NOT a dehydration).

- By dehydration of alcohols: CH3-CH2OH --(conc. H2SO4, 443 K)--> CH2=CH2 + H2O. Ease of dehydration: tertiary > secondary > primary alcohol.

- By dehalogenation of vicinal dihalides with Zn: CH2Br-CH2Br + Zn -> CH2=CH2 + ZnBr2.

- By controlled hydrogenation and by Kolbe electrolysis of salts of dicarboxylic acids (for ethene from sodium maleate/fumarate).

6. Chemical Properties of Alkenes — Electrophilic Addition

The pi electrons of C=C are exposed and loosely held, so alkenes behave as electron-rich species and are attacked first by electrophiles. Most reactions are electrophilic addition reactions in two steps: the electrophile adds first to give the more stable carbocation, then the nucleophile completes the addition.

ReactionPlain-text exampleKey point
Addition of H2CH2=CH2 + H2 --(Ni/Pt/Pd)--> CH3-CH3Hydrogenation; gives the alkane
Addition of halogensCH2=CH2 + Br2 -> CH2Br-CH2BrReddish-brown Br2 is decolourised — a test for unsaturation
Addition of HXCH3-CH=CH2 + HBr -> CH3-CHBr-CH3Markovnikov product (see below)
Addition of H2OCH3-CH=CH2 + H2O --(H3PO4, heat, pressure)--> CH3-CH(OH)-CH3Follows Markovnikov rule; industrial preparation of alcohols
Addition of conc. H2SO4CH2=CH2 + H2SO4 (cold, conc.) -> CH3-CH2-OSO3HOn warming with water gives the alcohol; also Markovnikov
Oxidation (Baeyer)CH2=CH2 + cold dilute KMnO4 -> HO-CH2-CH2-OHPink colour discharged; product is a vicinal diol (ethane-1,2-diol)
Ozonolysis(CH3)2C=CH-CH3 + O3, then Zn/H2O -> (CH3)2C=O + CH3-CHOC=C is cut; each doubly bonded carbon becomes a carbonyl carbon
Polymerisationn CH2=CH2 --(high T, P, catalyst)--> polytheneAddition polymerisation; also propene -> polypropene
  • Markovnikov rule: in the addition of HX (or H2O) to an unsymmetrical alkene, the hydrogen atom goes to the carbon that already has more hydrogen atoms — equivalently, the negative part (X or OH) goes to the carbon carrying fewer hydrogens, because addition proceeds through the more stable carbocation. Example: propene + HBr gives 2-bromopropane as the major product.
  • Peroxide effect (Kharasch effect): in the presence of peroxides, addition of HBr only (not HCl or HI) takes the opposite course — the bromine goes to the carbon with more hydrogens: CH3-CH=CH2 + HBr --(peroxide)--> CH3-CH2-CH2Br (1-bromopropane). The mechanism is free-radical, not ionic. The peroxide effect does not work for HCl (H-Cl bond too strong to break homolytically) or HI (iodine radicals combine to I2 instead of adding).
  • Ozonolysis in detail: ozone adds to the double bond to form an ozonide, which is cleaved by Zn/H2O (reductive work-up). =CH2 gives formaldehyde (methanal), =CH-R gives an aldehyde R-CHO, and =C(R)(R') gives a ketone. The reaction is used to locate the position of the double bond: joining the carbonyl products back at their C=O carbons reconstructs the alkene. Worked example: an alkene A gives propanone (CH3-CO-CH3) and ethanal (CH3-CHO) on ozonolysis, so A is (CH3)2C=CH-CH3, i.e. 2-methylbut-2-ene; addition of HCl to A (Markovnikov) gives 2-chloro-2-methylbutane as the major product B.
  • Baeyer's reagent is cold, dilute, aqueous (alkaline) potassium permanganate solution. Alkenes (and alkynes) decolourise it, so it is a test for unsaturation; with hot concentrated KMnO4 the double bond is cleaved to carboxylic acids/CO2.

7. Alkynes — Preparation and Acidic Character

  • Alkynes have the general formula CnH2n-2 and contain a triple bond (one sigma + two pi bonds). The triply bonded carbons are sp hybridised and linear (180 degrees). The first member is ethyne (acetylene), C2H2, written in text as HC triple-bond CH.
  • Preparation:

- From calcium carbide: CaC2 + 2H2O -> C2H2 + Ca(OH)2 (laboratory preparation of ethyne).

- By dehydrohalogenation of vicinal dihalides: CH2Br-CH2Br + alc. KOH, then NaNH2 -> ethyne (two molecules of HBr are removed; the second step needs the strong base sodamide).

- By Kolbe electrolysis of sodium maleate or fumarate (ethyne at the anode).

- Partial reduction is the reverse direction: alkynes are reduced to alkenes or alkanes (below).

  • Hydrogenation of alkynes (controlled): but-2-yne, CH3-C triple-bond C-CH3, with H2, Pd/C poisoned with quinoline (Lindlar catalyst) stops at the cis-alkene (cis-2-butene); with Na in liquid NH3 (Birch reduction) it gives the trans-alkene (trans-2-butene). Complete hydrogenation with excess H2/Ni gives the alkane.
  • Acidic character: hydrogen atoms attached to a triply bonded (sp) carbon are acidic. Ethyne reacts with strong bases and ammoniacal solutions: C2H2 + 2Na -> NaC triple-bond CNa + H2; ethyne and other terminal alkynes (triple bond at the end of the chain, with a hydrogen on the sp carbon) give a white precipitate with ammoniacal AgNO3 and a red precipitate with ammoniacal Cu2Cl2 — used as tests for a terminal triple bond. Internal alkynes such as but-2-yne show no such reaction.
  • Reason for acidity: the sp carbon has 50% s-character, so it is highly electronegative and holds the C-H bonding electrons close, making H easy to remove as H+. Acidity order: alkyne (sp, 50% s) > alkene (sp2, 33% s) > alkane (sp3, 25% s); correspondingly the conjugate bases are stabilised in the same order.

8. Chemical Properties of Alkynes

  • Electrophilic addition: alkynes add H2, halogens and HX across the triple bond, usually in two stages (alkyne -> alkene derivative -> alkane derivative). Addition of HX follows the Markovnikov rule: C2H2 + 2HBr -> CH3-CHBr2 (both halogens on the same, more substituted carbon in the final product). Addition is slower than for alkenes because the intermediate vinyl carbocation is less stable.
  • Hydration to carbonyl compounds: alkynes add water in the presence of HgSO4 and dilute H2SO4 at about 333 K (Kucherov reaction): C2H2 + H2O --(HgSO4/H2SO4)--> CH3-CHO (ethanal). The first product is an enol which rearranges (tautomerises) to the carbonyl compound. Ethyne gives ethanal (an aldehyde); every other alkyne gives a ketone — for example propyne gives propanone, CH3-C triple-bond CH + H2O -> CH3-CO-CH3, following Markovnikov addition of OH to the more substituted carbon.
  • Ozonolysis and oxidation: alkynes are cleaved by ozone and by hot KMnO4 to carboxylic acids; terminal alkynes give CO2 from the terminal carbon. They also decolourise Baeyer's reagent.
  • Polymerisation (in brief): (i) Cyclic polymerisation — ethyne passed through a red-hot iron tube at about 873 K gives benzene: 3 C2H2 --(red hot Fe tube, 873 K)--> C6H6. Propyne similarly gives mesitylene (1,3,5-trimethylbenzene). (ii) Linear polymerisation — under suitable conditions ethyne polymerises to polyacetylene, and with CuCl/NH4Cl catalyst two molecules couple to vinylacetylene, a step towards synthetic rubber (chloroprene route).

9. Benzene — Structure, Resonance and Aromaticity



  • Benzene, C6H6, was assigned a ring structure by Kekule: a hexagon of six carbons with alternating single and double bonds and one hydrogen on each carbon. Every carbon is sp2 hybridised; the ring is planar with all bond angles 120 degrees.
  • Evidence against a fixed alternating structure: benzene does not decolourise Br2 water or Baeyer's reagent (it prefers substitution, not addition); all six C-C bonds are equal in length, 139 pm — between a single bond (154 pm) and a double bond (134 pm); its heat of hydrogenation is much lower than expected for three isolated double bonds, showing extra stability.
  • Resonance: benzene is described as a resonance hybrid of the two Kekule forms. The six pi electrons are delocalised over the whole ring (shown as a circle inside the hexagon). This delocalisation gives benzene its extra stability (resonance energy about 150 kJ mol-1) and equal bond lengths.
  • Aromaticity and Huckel rule (in brief): a planar, cyclic, fully conjugated system is aromatic (specially stable) when it contains (4n + 2) pi electrons, where n = 0, 1, 2, ... Benzene has 6 pi electrons (n = 1) and is aromatic. Systems with 4n pi electrons (for example cyclobutadiene, 4 pi electrons) are anti-aromatic and very unstable. Aromatic compounds undergo substitution rather than addition, because addition would destroy the delocalised pi system and its resonance energy.

10. Electrophilic Substitution of Benzene

Benzene's pi-electron cloud is attacked by electrophiles (E+), but the ring keeps its aromatic system: the electrophile first adds to give a carbocation intermediate (arenium ion, resonance stabilised), and then a proton is removed to restore the ring. Overall a hydrogen is substituted by E+. The common reactions:

ReactionReagentsElectrophileProduct (plain text)
NitrationConc. HNO3 + conc. H2SO4, about 323 KNO2+ (nitronium ion)C6H6 -> C6H5-NO2 (nitrobenzene)
HalogenationBr2 or Cl2 with FeBr3 / FeCl3 (Lewis acid)Br+ / Cl+ (polarised halogen)C6H5-Br (bromobenzene) / C6H5-Cl
SulphonationFuming H2SO4 (contains SO3), heatSO3C6H5-SO3H (benzenesulphonic acid); reaction is reversible
Friedel-Crafts alkylationR-Cl with anhydrous AlCl3R+ (carbocation)C6H5-R (alkylbenzene), e.g. C6H5-CH3 (toluene) from CH3Cl
Friedel-Crafts acylationR-COCl with anhydrous AlCl3R-C=O+ (acylium ion)C6H5-CO-R (aryl ketone), e.g. C6H5-CO-CH3 (acetophenone) from CH3COCl
  • Generation of the nitronium ion: HNO3 + 2H2SO4 -> NO2+ + H3O+ + 2HSO4-. Here sulphuric acid acts as the acid and nitric acid as the base.
  • Role of the Lewis acid in halogenation and Friedel-Crafts: FeBr3 / AlCl3 polarises the halogen or the alkyl/acyl halide and helps generate the electrophile. Anhydrous AlCl3 is essential in Friedel-Crafts reactions; moisture destroys it.
  • Limits of Friedel-Crafts alkylation: (i) the carbocation can rearrange, so the product may differ from expectation (for example benzene + 1-chloropropane/AlCl3 gives mainly isopropylbenzene, not n-propylbenzene); (ii) polyalkylation occurs because the alkylated ring is more reactive; (iii) the reaction fails on strongly deactivated rings such as nitrobenzene, and aniline does not undergo Friedel-Crafts alkylation because its -NH2 group reacts with AlCl3 to form a salt that strongly deactivates the ring. Acylation has no rearrangement and no polyacylation problem, because the acyl group deactivates the ring after one substitution.
  • Sulphonation is used in detergent chemistry, and its reversibility means the -SO3H group can be used as a temporary blocking group and later removed by heating with steam.

11. Directive Influence of Groups (in brief)

A group already present on the ring controls where the next electrophile goes (orientation) and how fast (activation).

TypeExamplesEffect on rateDirects the incoming group to
Activating groups-OH, -NH2, -CH3 and other alkyl groups, -OCH3Ring becomes more reactive than benzeneOrtho and para positions
Deactivating groups-NO2, -COOH, -SO3H, -CHO, -CNRing becomes less reactive than benzeneMeta position
Halogens (special case)-Cl, -BrDeactivating (slower than benzene) yet stillOrtho and para positions
  • Why: electron-releasing groups (+I or +R effect, for example -CH3 by hyperconjugation and +I, -OH/-NH2 by strong +R) increase the electron density of the ring, especially at the ortho and para positions, so the electrophile goes there and reaction is faster. Electron-withdrawing groups (-NO2, -COOH by -I and -R) decrease electron density, most strongly at ortho/para, leaving the meta position relatively better, so substitution occurs at meta and is slower. Halogens withdraw electrons by -I (deactivating) but donate a lone pair by +R towards ortho/para (directing) — hence the special behaviour.
  • Toluene nitrates faster than benzene and gives mainly o- and p-nitrotoluene; nitrobenzene nitrates much more slowly and gives m-dinitrobenzene.

12. Carcinogenicity (in brief)

Some polynuclear aromatic hydrocarbons (rings fused together, for example 1,2-benzanthracene, benzopyrene (benzo[a]pyrene) and 1,2,5,6-dibenzanthracene) are carcinogenic — they can cause cancer. They are formed by the incomplete combustion of organic matter such as coal, oil, tobacco and wood, and are present in coal tar and tobacco smoke. This is one reason smoking and heavy smoke pollution are serious health hazards. Benzene itself is also toxic and its exposure is controlled in industry.

13. Important Facts — One-Liners (for last-minute revision)

1. General formulas: alkanes CnH2n+2, alkenes CnH2n, alkynes CnH2n-2.

2. Wurtz reaction couples two alkyl halides with Na/dry ether; odd-carbon alkanes like n-heptane cannot be made in good yield by it, and methane cannot be made at all.

3. Decarboxylation: sodium carboxylate + soda lime (NaOH + CaO), heat -> alkane with one carbon less; the missing reagent over the arrow is often CaO.

4. Kolbe electrolysis of sodium ethanoate gives ethane at the anode.

5. Halogen reactivity towards alkanes: F2 > Cl2 > Br2 > I2; halogenation of methane needs sunlight/UV and follows a free-radical chain mechanism.

6. Branching lowers boiling point: n-pentane > isopentane > neopentane (smaller surface area, weaker van der Waals forces).

7. Aromatisation: n-hexane --(Cr2O3/Al2O3, 773 K)--> benzene + 4H2.

8. Ethane conformations: staggered (dihedral angle 60 degrees) is most stable; eclipsed (0 degrees) is least stable; energy gap only about 12.5 kJ mol-1.

9. Geometrical isomerism needs two different groups on each doubly bonded carbon; 2-methylprop-1-ene and pent-1-ene cannot show it, 3,4-dimethylhex-3-ene can.

10. Saytzeff (Zaitsev) rule: dehydrohalogenation gives the more substituted alkene as the major product — 2-bromopentane gives pent-2-ene.

11. Markovnikov rule: H of HX goes to the carbon with more hydrogens; propene + HBr gives 2-bromopropane.

12. Peroxide (Kharasch) effect reverses HBr addition only: propene + HBr/peroxide gives 1-bromopropane; it does not work for HCl or HI.

13. Baeyer's reagent = cold, dilute, aqueous KMnO4; alkenes and alkynes decolourise it (test for unsaturation).

14. Ozonolysis cuts C=C into carbonyls: =CH2 -> methanal, =CH-R -> aldehyde, =C(R)2 -> ketone; used to locate the double bond.

15. Lindlar catalyst (H2, Pd/C + quinoline) reduces an alkyne to the cis-alkene; Na/liquid NH3 gives the trans-alkene.

16. Terminal alkynes are acidic: white precipitate with ammoniacal AgNO3, red with ammoniacal Cu2Cl2; internal alkynes give neither.

17. Acidity order: alkyne > alkene > alkane, because s-character falls sp (50%) > sp2 (33%) > sp3 (25%).

18. Hydration of alkynes (HgSO4/dilute H2SO4): ethyne -> ethanal; all other alkynes give ketones (propyne -> propanone).

19. Cyclic polymerisation: 3 molecules of ethyne through a red-hot iron tube (873 K) give benzene.

20. Benzene: all C-C bonds equal at 139 pm; 6 delocalised pi electrons; resonance energy about 150 kJ mol-1.

21. Huckel rule: aromatic systems have (4n + 2) pi electrons in a planar, cyclic, conjugated ring; benzene fits with n = 1.

22. Nitration electrophile is NO2+, made by conc. HNO3 + conc. H2SO4; sulphonation (by SO3) is reversible.

23. Friedel-Crafts: alkylation suffers rearrangement and polyalkylation and fails for nitrobenzene and aniline; acylation (RCOCl/AlCl3) gives an aryl ketone cleanly, for example acetophenone.

24. Directive influence: -CH3, -OH, -NH2 are activating and ortho/para directing; -NO2, -COOH are deactivating and meta directing; halogens are deactivating yet ortho/para directing. Benzopyrene in tobacco smoke and coal tar is a polynuclear carcinogen.

14. Common Mistakes — Watch Out

1. Wurtz for every alkane is wrong — odd-carbon alkanes (n-heptane) give a mixture of three alkanes in poor yield, and methane cannot be prepared by Wurtz at all.

2. Decarboxylation product has one carbon LESS — sodium propanoate gives ethane, not propane; and the reagent is soda lime (NaOH + CaO), not NaOH alone.

3. Eclipsed ethane is the LEAST stable conformer (dihedral angle 0 degrees), not the most stable; staggered (60 degrees) is the most stable.

4. Markovnikov vs peroxide: peroxide reverses the addition of HBr only. With HCl or HI the normal Markovnikov product forms even in the presence of peroxide.

5. Geometrical isomerism is not automatic for every alkene — if either doubly bonded carbon carries two identical groups (for example =CH2 in pent-1-ene), no cis-trans pair exists.

6. Dehydrohalogenation is not dehydration — removing HBr from 2-bromopentane (alc. KOH) is beta-elimination/dehydrohalogenation following Zaitsev's rule; dehydration means removing H2O from an alcohol.

7. Baeyer's reagent is COLD and DILUTE KMnO4 — not acidic or hot concentrated KMnO4; hot concentrated KMnO4 cleaves the double bond instead of giving the diol.

8. Ozonolysis work-up matters: Zn/H2O (reductive) gives aldehydes and ketones; do not write the ozonide itself as the final product, and remember =CH2 always gives methanal (formaldehyde).

9. Only TERMINAL alkynes are acidic — but-2-yne gives no precipitate with ammoniacal AgNO3 because it has no hydrogen on an sp carbon.

10. Hydration of ethyne gives ethanal, not a ketone — ethyne is the one exception; propyne and all higher alkynes give ketones.

11. Benzene gives SUBSTITUTION, not addition — it does not decolourise bromine water; addition would destroy the aromatic pi system and its resonance energy.

12. Friedel-Crafts alkylation can rearrange and repeat — expect isopropylbenzene from 1-chloropropane, and remember the reaction fails with nitrobenzene and with aniline; acylation avoids both problems.

13. Halogens on benzene are deactivating but ortho/para directing — do not group them with -NO2 as meta directors, and do not call them activating either.

Next step: after these notes, take the 30-question Objective Quiz of this chapter — including previous years' questions, with an explanation for every question.

एक टिप्पणी भेजें (0)
और नया पुराने